O-Ring Handbook
www.callapg.com 713-675-5271 FAX 713-675-2730
1-800-888-5223 FAX 1-800-444-3252
“America’s Most Responsive Warehouse”
www.callapg.com email [emailprotected](713) 675-5271 FAX: (713) 675-27301-800-888-5223 FAX: 1-800-444-3252
P.O. Box 213 (77001) 6039 Armour Dr. (77020)Houston, Texas
(440) 926-1234 P.O. Box 361-800-883-7457 1004 Commerce DriveFax: (440) 926-1112 Grafton, Ohio 44044
i
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iiAPGO-Ring Compounds and Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Elastomer Description and Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2O-Ring Dimensional Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Standard O-Ring Sizes and Tolerances. . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Standard O-Ring Sizes and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 7O-Ring Boss Gaskets for Straight Thread Tube Fittings . . . . . . . . . . . . . . . 17Metric O-Ring Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Japanese Industrial Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Metric O-Ring Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Q-Ring Sizes and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Contoured Back-Up Rings-Series 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45PTFE Spiral Back-Up Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48PTFE Back-Up Rings (Solid and Split) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52PTFE Back-Up Rings (Extended Sizes). . . . . . . . . . . . . . . . . . . . . . . . . . . 54Leather Back-Up Rings-Series 6244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Leather Back-Up Rings-Series 6246 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Square Cut Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58O-Ring Groove Design Criteria and Installation Data . . . . . . . . . . . . . . . . . 62
Gland Dimensional Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Installation Data (inches) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Installation Data (millimeters) . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Vulcanizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Standards for Spliced Extrusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80O-Ring Cord Stock and Extrusions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Related O-Ring Items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Compound Selection for Fluids and Chemicals . . . . . . . . . . . . . . . . . . . . . . . . . . . .87Age Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Fastener Seals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Thread Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Table of Contents
The CompleteAPG Product Line is listed on pages 105 and 106.
November 2011
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page i
Aflas® . . . . . . . . . . . . . . . . . . . . . . . 1, 3Age Controls . . . . . . . . . . . . . . . . . . . 97Back-Up Rings (Contoured Back-Up-Series 8) . . . . . . . . . . . . . . . . . . . . 45
Back-Up Rings (Leather) . . . . . . . 56, 57Back-Up Rings (PTFE -ExtendedSizes) . . . . . . . . . . . . . . . . . . . . . . 54
Back-Up Rings (PTFE Solid & Split) . 52Back-Up Rings (PTFE Spiral) . . . . . . 48Bags (Re-closable Plastic) . . . . . . . . 85Boss Gaskets (O-Ring) . . . . . . . . . . . 17Chart (O-Ring Sizing) . . . . . . . . . . . . 85Chemicals and Fluids (CompoundSelection for). . . . . . . . . . . . . . . . . 87
Chloroprene . . . . . . . . . . . . . . . . . . 1, 2Compound Selection for Fluids andChemicals. . . . . . . . . . . . . . . . . . . 87
Cone (O-Ring Measuring) . . . . . . . . . 85Contoured Back-Up Rings (Series 8) . 45Cord Stock (O-Ring) . . . . . . . . . . . . . 81Dynamic Sealing . . . . . . . . . . . . . . . . 62Elastomer Descriptions . . . . . . . . . . . . 2EPDM . . . . . . . . . . . . . . . . . . . . . . . 1, 3EPM . . . . . . . . . . . . . . . . . . . . . . . . 1, 3EPR. . . . . . . . . . . . . . . . . . . . . . . . . 1, 3Ethylene Propylene . . . . . . . . . . . . . 1, 3Extrusions . . . . . . . . . . . . . . . . . . . . . 81Fastener Seals . . . . . . . . . . . . . . . . . 98Fluoroelastomer . . . . . . . . . . . . . . . 1, 2Fluorosilicone . . . . . . . . . . . . . . . . . 1, 3Fluids and Chemicals (CompoundSelection for). . . . . . . . . . . . . . . . . 84
Gland Dimensional Data . . . . . . . . . . 65Gland Shape . . . . . . . . . . . . . . . . . . . 62Groove Design . . . . . . . . . . . . . . . . . 62Highly Saturated Nitrile . . . . . . . . . . 1, 2HNBR . . . . . . . . . . . . . . . . . . . . . . . 1, 2HSN . . . . . . . . . . . . . . . . . . . . . . . . 1, 2Installation Data . . . . . . . . . . . . . 66, 73Japanese Industrial Standards . . . . . 38Kit (O-Ring Splicing) . . . . . . . . . . . . . 78Kits (O-Ring) . . . . . . . . . . . . . . . . . . . 74Leather Back-Up Rings . . . . . . . . 56, 57Lubricants (O-Ring). . . . . . . . . . . . . . 86
Measuring Cone (O-Ring) . . . . . . . . . 85Measuring Tape . . . . . . . . . . . . . . . . 85Metric O-Rings . . . . . . . . . . . . . . . . . 18Neoprene . . . . . . . . . . . . . . . . . . . . 1, 2Nitrile. . . . . . . . . . . . . . . . . . . . . . . . 1, 2O-Ring Cord Stock . . . . . . . . . . . . . . 81O-Ring Identifier . . . . . . . . . . . . . . . . 85O-Ring Kits . . . . . . . . . . . . . . . . . . . . 74O-Ring Lubricants . . . . . . . . . . . . . . . 86O-Ring Measuring Cones . . . . . . . . . 85O-Ring Picks . . . . . . . . . . . . . . . . . . . 86O-Ring Sizing Chart . . . . . . . . . . . . . 85O-Ring Slide Gauge . . . . . . . . . . . . . 85O-Ring Splicing Kits . . . . . . . . . . . . . 78Picks (O-Ring). . . . . . . . . . . . . . . . . . 86Plastic Bags (Re-closeable) . . . . . . . 85Polyurethane. . . . . . . . . . . . . . . . . . 1, 3Pressure . . . . . . . . . . . . . . . . . . . . . . 63PTFE. . . . . . . . . . . . . . . . . . . . . . . . 1, 3PTFEBack-Up Rings (ExtendedSizes) . . . . . . . . . . . . . . . . . . . . . . 54
PTFEBack-UpRings (Solid &Split) . . 52PTFE Spiral Back-Up Rings 48Q-Rings. . . . . . . . . . . . . . . . . . . . . . . 41Re-Closeable Plastic Bags . . . . . . . . 85Selection (Compound, for Fluids andChemicals) . . . . . . . . . . . . . . . . . . 87
Silicone . . . . . . . . . . . . . . . . . . . . . . 1, 2Sizing Chart (O-Ring) . . . . . . . . . . . . 85Solid Back-Up Rings (PTFE) . . . . 52, 53Spiral Back-Up Rings (PTFE) . . . . . . 49Spliced Extrusion Standards . . . . . . . 80Splicing Kits . . . . . . . . . . . . . . . . . . . 78Split Back-Up Rings (PTFE) . . . . . . . 52Square Cut Rings . . . . . . . . . . . . . . . 58Squeeze . . . . . . . . . . . . . . . . . . . . . . 63Standard O-Rings . . . . . . . . . . . . . . 6, 7Standards for Spliced Extrusions . . . 80Static Sealing . . . . . . . . . . . . . . . . . . 62Surface Finish . . . . . . . . . . . . . . . . . . 64Teflon® Encapsulated. . . . . . . . . . . 1, 3, 4Thread Seals. . . . . . . . . . . . . . . . . . . 99Urethane . . . . . . . . . . . . . . . . . . . . . 1, 3Vulcanizing . . . . . . . . . . . . . . . . . . . . 79
Product Index
ii
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page ii
1
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
At press time for the printing of the catalog, the following represented a complete listing of O-Ring compounds andstyles inventoried by APG as standard stock items. (APG Style Numbers are listed in parenthesis). Other options maynow be available as standard items or by special order. Please inquire.
APGO-Ring Compounds and Styles
O-Rings
Aflas® 80 Durometer (A80)Chloroprene 70 Durometer (N70)E.P.R. 70 Durometer
Standard (E70)Metric (E)Peroxide Cured NSF (E70NSF)
E.P.R.- Peroxide Cured 80 Durometer (E80PC)*Fluoroelastomer – Black
Standard75 Durometer (V70)90 Durometer (V90)
Metric75 Durometer (V)90 Durometer (V90M)
*Fluoroelastomer – Brown75 Durometer (VB75)90 Durometer (VB90)
Fluorosilicone 70 Durometer (FS70)Highly Saturated Nitrile
Green 70 DurometerStandard (HS70)Metric (HS)Black 70 Durometer (HSN70)Black 90 Durometer (HSN90)Blue TFE Coated 70 Durometer (HST70)
Kalrez® 4079 (K4079)Nitrile - Black
Standard50 Durometer (H50)70 Durometer (H70)90 Durometer (H90)
Metric70 Durometer (H)90 Durometer (H90M)
Nitrile - Black - Peroxide Cured90 Durometer (H90PC)
Large Cross Section 70 Durometer (HX70)Nitrile - White 70 Durometer (H70FDA)PTFE (TFE)Silicone 70 Durometer
Standard (S70)Metric (S)
Square Cut RingsNitrile 70 Durometer (SH70)
Teflon® EncapsulatedViton® Core (TEV80)Silicone Core (TES70)
Urethane70 Durometer (U70)90 Durometer (U90)
O-Rings (Cont.)
4 Lobe Q-RingsNitrile 70 Durometer (QH70)Fluoroelastomer 75 Durometer (QV70)
Minnesota Quad-Rings®
Available at ENA (anAPG subsidiary)Nitrile 70 Durometer (HQ4)Viton® 70 Durometer (VQ4)
Back-Up RingsPTFE
Solid (TST)Split (TST)Spiral (TSP)
Contoured Back-Up RingsNitrile 90 Durometer (HB90)Fluoroelastomer 90 Durometer (VBU90)
Leather (Cut for Series6244 &Series 6246)
*APG stocks the Type “A” Grade Fluoroelastomer.Other Grades are available.Please inquire.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/25/11 7:27 AM Page 1
Trade Names:
The most widely used O-Ring elastomer. Excellent resistance to petroleum products. Excellent compression set, tearand abrasion resistance. Does not have good resistance to ozone, sunlight, or weather, unless specificallycompounded. Should not be stored in direct sunlight or near motors or other electrical equipment which may generateozone. Temperature range: -40° to +250°F.
2
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Elastomer Descriptions and Properties
Nitrile (Buna-N)
*Fluoroelastomer
Trade Names:
Excellent mechanical and physical properties. Good resistance to petroleum products, low compression set, and hightemperature resistance. Wide spectrum of chemical compatibility. Good for vacuum service and low gas permeability.Temperature range: -15° to +400°F (limited exposures to higher temperatures).*APG stocks the Type “A” Grade Fluoroelastomer. Other Grades are available. Please inquire.
Chloroprene
Trade Names:
Moderately resistant to petroleum products. Good ozone and weather resistance. Good compression set. Excellent forsealing refrigeration fluids such as Freon®. Temperature range: -65° to +250°F.
(Neoprene)
Trade Names:
Recommended for applications requiring a wide temperature range and good dry heat resistance. Good weather andozone resistance. Limited oil resistance. Not normally recommended for dynamic sealing applications due to relativelypoor tensile and tear strength and relatively low abrasion resistance. Temperature range: -80° to + 450°F.
Silicone
Chemigum (Goodyear) Ny Syn (Copolymer) Krynac (Polysar)Hycar (Zeon Chemical) Paracril (Uniroyal) Perbunan (Mobay)
Viton (E.I. duPont) Fluorel (3M)
Neoprene (E.I. duPont) Butachlor (Ditsugil) Bayprene (Mobay)
Silastic (Dow)
Highly Saturated Nitrile (HSN, HNBR)
Better resistance to high temperatures, superior physical properties, and improved chemical resistance over traditionalnitrile compounds. It also has better resistance to ozone, sunlight, and other atmospheric conditions. Excellentresistance to compression set. Green HSN is used in refrigerant R134a applications. Temperature range: - 40°F to+325°F.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 2
3
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Trade Names:
Excellent resistance to Skydrol® fluids used in commercial aircraft hydraulic systems. Also, recommended for hotwater, steam, and phosphate ester type hydraulic fluids. Also resistant to some acids, alkalies, and ozone. Notrecommended for petroleum fluids or diester lubricants. Temperature range: -65° to +300°F.
Ethylene Propylene (EPM, EPDM) (EPR)
PTFE
Aflas®
Trade Names:
Resistant to petroleum oils, hydrocarbon fuels, oxygen, ozone, and weathering. Particularly recommended forhydraulic systems where high pressures, shock loads, wide metal tolerances, or abrasive contamination is anticipated.Not recommended for acids, ketones, and chlorinated hydrocarbons. Some urethanes are also sensitive to water andhumidity. Temperature range: -65° to +200°F.
Urethane (Polyurethane)
(FVMQ)
Nordel (E.I. DuPont) Royalene (Uniroyal) Epsyn (Copolymer Rubber)Vistalon (Exxon Chemical) Epcar (B. F. Goodrich)
Trade Name:
White thermoplastic fluoroethylene resin offers a combination of qualities not found in any other material-chemicalinertness, heat resistance, low friction, dialectric strength, weatherability, zero water absorption, toughness, andflexibility. Temperature range: -65° to +500°F.
Teflon® (E.I. duPont)
Trade Name:
Advantageous combination of high temperature, chemical and electrical resistance properties. Recommended for oilsand lubricants, hydraulic and brake fluids, transmission and power steering fluids, sour oil and gas (H2S), aminecorrosion inhibitors, ozone, steam, acids, bases, alcohols, and a variety of other chemicals. Temperature range: +25°to +450°F. (+500°F short term).
Aflas® (Asahi Glass Co., Ltd.)
Texin (Miles Chemical) Cyanaprene (American Cyanamid)Adiprene (Uniroyal) Pellethane (Dow Chemical)
LS (Dow) FSE (GE)
Teflon® Encapsulated
Seamless and uniform Teflon® FEP encapsulation which completely encloses a core material of either silicone orViton® elastomer. Matches the chemical and temperature resistance of solid PTFE O-Rings and possesses theelasticity and recovery properties which are crucial in many sealing applications. Complete technical information onTeflon® Encapsulated O-Rings is provided on pages 4 and 5.
Fluorosilicone
Good low/high temperature resistance. Excellent resistance to petroleum oils and fuels. Used in aerospace applicationsfor fuel systems and systems requiring resistance to diester base lubricants to 350˚F. Due to limited strength andabrasion resistance, this material is generally recommended for static applications only. Temperature range: -80˚ to+350/400˚F.
Trade Names:
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 3
4
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Teflon™Encapsulated O-RingTechnical Information
Composition and StructureTeflon™ FEP Encapsulated o-rings consist of a seamlessand uniform Teflon™ FEP encapsulation which completelyencloses a core material of either silicone or Viton™elastomer.
Teflon™ FEP Encapsulationbetween 0.010” to 0.045”depending on o-ring crosssection (not a coating)
Silicone or Viton™Core Material
Function and PerformanceThe seamless, uniform, and integral Teflon™ FEPencapsulation is responsible for the sealing effect, and theelastomer core provides continuous reset and constantpressure of the encapsulation onto the sealing point. Theresult is an overall compression, increasing with mediumpressure.
As a result, the Teflon™ FEP Encapsulated O-Rings canoutperform solid PTFE O-Rings. The encapsulated o-ringsmatch the chemical and temperature resistance of solidPTFE O-Rings and possess the elasticity and recoveryproperties which are crucial in many sealing applications.
Chemical attack and swelling are the primary causes offailure in o-rings. The Teflon™ FEP encapsulation is virtuallychemically inert and not subject to most chemical attack.Temperature operating range-60°C/-75°F to +205°C/400°F.
Properties/Specifications
(1) Encapsulation material: Teflon™ FEP resin(yielding high chemical resistance).
(2) Core material: Silicone or Viton™ elastomers.(3) Operational temperature range:
-60°C/-75°F to +205°C/400°F.(4) Coefficient of friction: .1 to .2(5) Elongation at break: 100%-156%(6) Water absorption:<0.01(7) Average total shoreAhardness:
85-90 shoreA-silicone core90-95 shoreA-Viton™core
(8) FDACompliance: The clear Teflon™ FEPencapsulation complies with part 177 of Title 21of the Food and DrugAdministration’sregulations for safe use as articles orcomponents of articles for producing,manufacturing, processing, preparing, treating,packaging, transporting, or holding food inaccordance with regulation 177.1550.
Industrial Applications
• Aircraft andAerospace• Chemical Processing Industries• Pharmaceutical Production• Polymer Production• Paint and Coating Operations• Food Industries• Petrochemical Industries• Chemical Transport• Semi-Conductor Manufacturing• Pulp and Paper Industries• Photochemical Industries
SpecificApplications
• Air Operated Pumps• Mechanical Pumps• Autoclaves• Heat Exchangers• Pipelines• Pressure Vessels• Valves• Filtration Systems• Gas Compressors
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 4
Permeability of Teflon™ FEPResins(gm/100in
2/24 hrs-1mil)
1TABLE 1
GASES2 23°C/73°F 35°C/95°F 50°C/122°F
Carbon DioxideHeliumHydrogen ChlorideNitrogen 0.18Oxygen 0.39
VAPORS3
AceticAcid 0.42Acetone 0.13 0.95 3.29Acetophenone 0.47Benzene 0.15 0.64N-Butyl Ether 0.08 0.65Carbon Tetrachloride 0.11 0.31Decane 0.72 1.03Dipentene 0.17 0.35EthylAcetate 0.06 0.77 2.90EthylAlcohol 0.11 0.69Hexane 0.57HydrochloricAcid (20%) <0.01Methanol 5.61Piperdine 0.04Skydrol Hydraulic Fluid 0.05Sodium Hydroxide (50%) 4x10
-5
SulfuricAcid (98%) 8x10-6
Toluene 0.37 2.93Water 0.09 0.45 0.89
1. Note that the permeation data listed in Table 1 is based on0.001” thickness of Teflon™ FEP encapsulation. Thetransmission rate significantly decreases when thethickness of encapsulation is increased. See water vaportransmission rate chart.
2. Test method: ASTMD-790-59 (at 1atm).3. Test method: ASTME-96-53T (vapor Pressure).
Water Vapor Transmission Rate ofTeflon™FEPResins@ 40°C/104°FTransmission Rate = gm/100in2/24hrs
0.40
0.35
0.30
0.25
0.20
0.15
0.10
<.05
3 6 9 10 12
Thickness/milsPlease note that the vapor transmission rate significantly decreases when
the thickness of encapsulation is increased
5
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Gas PermeabilityAll plastics have some permeability to gases. In the caseof Teflon™ FEP Encapsulated O-Rings, however, gasesand vapors will permeate at a considerably lower rate thanfor most other plastics. The primary permeationmechanism is intermolecular migration. This migrationrate depends on the type of gas, pressure, temperature,size of contact areas, and thickness of encapsulation.While highly corrosive gases do not attack theTeflon™FEP Encapsulation of the o-ring, they mayeventually permeate through and damage the elastomercore and hence affect the mechanical properties. Thus, inaddition to chemical resistance, these permeability effectsmust be considered in gas sealing systems.
AbsorptionTeflon™ FEPEncapsulated O-Rings absorb practically nocommon acids or bases at temperatures as high as200°C/329°F with exposures up to one year. Even theabsorption of solvents is surprisingly small; weightincreases are generally less than 1% at elevatedtemperatures and exposure times. Due to the Teflon™FEP encapsulation, the effects of volume swell (one of theprincipal causes of seal failure) can be virtually ignored.
Thickness of EncapsulationAs discussed earlier, the thickness of encapsulation mustbe considered in determining migration rates. Thethickness of the encapsulation varies with the crosssection of the o-ring.
Final selection of applications must be based on functionalevaluations or experience under actual end useconditions. This has become industry practice dictated bythe many complex aspects of performance in severeconditions. The end user should thoroughly test anyapplication, and independently conclude satisfactoryperformance of the product for his intended use, and shallassume all risk and liability whatsoever in connectiontherewith.
CROSS WALL CROSS WALLSECTION SECTION SECTION SECTION(mm/inches) (mm/inches) (mm/inches) (mm/inches)
1.50mm/.059 0.203mm/.008 7.50mm/.295 0.508mm/.0201.60mm/.063 0.203mm/.008 8.00mm/.312 0.508mm/.0201.78mm/.070 0.254mm/.010 8.40mm/.330 0.508mm/.0202.00mm/.079 0.254mm/.010 9.00mm/.354 0.508mm/.0202.40mm/.094 0.254mm/.010 9.50mm/.374 0.508mm/.0202.62mm/.103 0.279mm/.011 10.00mm/.393 0.508mm/.0203.00mm/.118 0.279mm/.011 11.00mm/.433 0.762mm/.0303.53mm/.139 0.305mm/.012 12.00mm/.472 0.762mm/.0304.00mm/.157 0.305mm/.012 12.70mm/.500 0.762mm/.0304.50mm/.177 0.381mm/.015 14.00mm/.551 0.762mm/.0305.00mm/.196 0.381mm/.015 15.00mm/.591 0.762mm/.0305.33mm/.210 0.381mm/.015 16.00mm/.625 0.762mm/.0305.70mm/.225 0.381mm/.015 18.00mm/.708 0.762mm/.0306.00mm/.236 0.381mm/.015 19.00mm/.750 0.762mm/.0307.00mm/.275 0.508mm/.020 20.00mm/.787 0.762mm/.030
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 5
6
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Standard O-Ring Sizes and Tolerances
O-Ring Dimensional Data
An O-Ring functions as a seal through the mechanicaldeformation of the elastomeric compound by matingmetal surfaces. The resilient rubber conforms to theshape of the metal sections and blocks the passage ofgases or liquids. If the pressure increases, the O-Ring isfurther deformed and provides tighter sealing.
The application of O-Rings is based on a volumerelationship between the O-Ring and the gland.Experience has shown that O-Ring volume is notadversely affected by wider dimensional tolerances.Furthermore, Type II tolerances long in use for thefluoroelastomers and similar high shrinkage materialshave proven to be as effective as seals molded to tightertolerances. This is attributable to constant seal volume.
As a result of this, the latest revision of AS 568, formerlyARP 568 and now AS 568A, is a combination of Class Iand II tolerances. This change is being incorporated in allmilitary specifications and drawings as they come up forrevision. Therefore, in the future, most AN, MS and NAStolerance standards will conform toAS 568A. It should berecognized that standards apply both to dimensions, asshown, to drawing numbers, and to compounds, and thatthe military specifications will not be withdrawn, butupdated to conform to a single dimensional specification.Various company standards probably also will be revisedto meet this standard.
Through O-Ring industry sponsored technicalcommittees, the United States is currently working withthe International Standards Organization (ISO) to adaptAS 568A standard sizes to international metricrequirements.
Tentative agreement has been reached on a sizestandard incorporating the existing five AS 568A crosssections and a series of ID dimensions determined by alogarithmic progression of the numbers. The result hasbeen to increase the number of small sizes, i.e. to makethe steps between sizes smaller, and to decrease thenumber of large sizes by widening the steps betweensizes. This action is consistent with the assemblyrequirements of an O-Ring seal, and the elastic propertiesof O-Ring seal compounds.
Although some U.S. sizes will be deleted or modified inthe new document, manufacturers will continue tomanufacture existing sizes as long as there is demand.
The new ISO sizes will become available whenapproved by member nations. In the meantime, AS568A contains metric equivalents in InternationalSystem (SI) units. Calculation of these metricequivalents was done in accord with the rulesappearing in SAE J390, Method A, rounding offtolerances as recommended.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 6
7
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
METRICINCH STANDARD
NOMINALSIZE STANDARD (MM)
I.D. O.D. C.S. I.D. ± I.D. ±
MS 28775MS 29513
AN 6227B MS 29561 AN 1238561AND MS 9021 TO
AN 6230B MS 9068 AN 123934NAS 1593NAS 1594
AS-568A NAS 1611UNIVERSAL
DASH PART DASH PARTNUMBERS NUMBERS NUMBERS NUMBERS
Standard O-Ring Sizes and Dimensions
-004 to -050 Cross Section Diameters = .070 ± .003 inches— 1.78 ± 0.08 millimeters.
1 ForAN 123956 toAN 124034, add 100 to part numbers shown in this column.* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.** These dash numbers are not included in MS 9068, MS 29561, NAS 1593 or NAS 1594 series.
-003 = .060 ± .003 in.= 1.52 ± .08 mm.
-001 = .040 ± .003 in.= 1.02 ± .08 mm.
� Cross Section Diameter: -002 = .050 ± .003 in.= 1.27 ± .08 mm.
���
-001 -001** 1/32 x 3/32 x1/32 .029 .004 0.74 0.10-002 -002** 3/64 x 9/64 x1/32 .042 .004 1.07 0.10-003 -003** 1/16 x 3/16 x1/16 .056 .004 1.42 0.10-004 -004 5/64 x 13/64 x1/16 .070 .005 1.78 0.13-005 -005 3/32 x 7/32 x1/16 .101 .005 2.57 0.13
-006 AN 6227B-1 -006 AN 123856 1/8 x 1/4 x1/16 .114 .005 2.90 0.13-007 AN 6227B-2 -007 AN 123857 5/32 x 9/32 x1/16 .145 .005 3.68 0.13-008 AN 6227B-3 -008 AN 123858 3/16 x 5/16 x1/16 .176 .005 4.47 0.13-009 AN 6227B-4 -009 AN 123859 7/32 x 11/32 x1/16 .208 .005 5.28 0.13-010 AN 6227B-5 -010 AN 123860 1/4 x 3/8 x1/16 .239 .005 6.07 0.13
-011 AN 6227B-6 -011 AN 123861 5/16 x 7/16 x1/16 .301 .005 7.65 0.13-012 AN 6227B-7 -012 AN 123862 3/8 x 1/2 x1/16 .364 .005 9.25 0.13-013 -013 7/16 x 9/16 x1/16 .426 .005 10.82 0.13-014 -014 1/2 x 5/8 x1/16 .489 .005 12.42 0.13-015 -015 9/16 x 11/16 x1/16 .551 .007 14.00 0.18
-016 -016 5/8 x 3/4 x1/16 .614 .009 15.60 0.23-017 -017 11/16 x 13/16 x1/16 .676 .009 17.17 0.23-018 -018 3/4 x 7/8 x1/16 .739 .009 18.77 0.23-019 -019 13/16 x 15/16 x1/16 .801 .009 20.35 0.23-020 -020 7/8 x 1 x1/16 .864 .009 21.95 0.23
-021 -021 15/16 x1-1/16 x1/16 .926 .009 23.52 0.23-022 -022 1 x1-1/8 x1/16 .989 .010 25.12 0.25-023 -023 1-1/16 x1-3/16 x1/16 1.051 .010 26.70 0.25-024 -024 1-1/8 x1-1/4 x1/16 1.114 .010 28.30 0.25-025 -025 1-3/16 x1-5/16 x1/16 1.176 .011 29.87 0.28
-026 -026 1-1/4 x1-3/8 x1/16 1.239 .011 31.47 0.28-027 -027 1-5/16 x1-7/16 x1/16 1.301 .011 33.05 0.28-028 -028 1-3/8 x1-1/2 x1/16 1.364 .013 34.65 0.33-029 -029* 1-1/2 x1-5/8 x1/16 1.489 .013 37.82 0.33-030 -030* 1-5/8 x1-3/4 x1/16 1.614 .013 41.00 0.33
-031 -031* 1-3/4 x1-7/8 x1/16 1.739 .015 44.17 0.38-032 -032* 1-7/8 x 2 x1/16 1.864 .015 47.35 0.38-033 -033* 2 x2-1/8 x1/16 1.989 .018 50.52 0.46-034 -034* 2-1/8 x2-1/4 x1/16 2.114 .018 53.70 0.46-035 -035* 2-1/4 x2-3/8 x1/16 2.239 .018 56.87 0.46
-036 -036* 2-3/8 x2-1/2 x1/16 2.364 .018 60.05 0.46-037 -037* 2-1/2 x2-5/8 x1/16 2.489 .018 63.22 0.46-038 -038* 2-5/8 x2-3/4 x1/16 2.614 .020 66.40 0.51-039 -039* 2-3/4 x2-7/8 x1/16 2.739 .020 69.57 0.51-040 -040* 2-7/8 x 3 x1/16 2.864 .020 72.75 0.51
-041 -041* 3 x3-1/8 x1/16 2.989 .024 75.92 0.61-042 -042* 3-1/4 x3-3/8 x1/16 3.239 .024 82.27 0.61-043 -043* 3-1/2 x3-5/8 x1/16 3.489 .024 88.62 0.61-044 -044* 3-3/4 x3-7/8 x1/16 3.739 .027 94.97 0.69-045 -045* 4 x4-1/8 x1/16 3.989 .027 101.32 0.69
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety ofcompounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkagerates (other thanAN) will produce slightly different dimensions and tolerances.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 7
8
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
MS 28775MS 29513
AN 6227B MS 29561 AN 1238561AND MS 9021 TO
AN 6230B MS 9068 AN 123934NAS 1593NAS 1594
AS-568A NAS 1611UNIVERSAL
DASH PART DASH PARTNUMBERS NUMBERS NUMBERS NUMBERS
METRICINCH STANDARD
NOMINALSIZE STANDARD (MM)
I.D. O.D. C.S. I.D. ± I.D. ±
1 ForAN 123956 toAN 124034, add 100 to part numbers shown in this column.* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.** These dash numbers are not included in MS 9068, MS 29561, NAS 1593 or NAS 1594 series.
-046 -046*†† 4-1/4 x4-3/8 x1/16 4.239 .030 107.67 0.76-047 -047*†† 4-1/2 x4-5/8 x1/16 4.489 .030 114.02 0.76-048 -048*†† 4-3/4 x4-7/8 x1/16 4.739 .030 120.37 0.76-049 -049*†† 5 x5-1/8 x1/16 4.989 .037 126.72 0.94-050 -050*†† 5-1/4 x5-3/8 x1/16 5.239 .037 133.07 0.94
-102 to -178 Cross Section Diameters = .103 ± .003 inches— 2.62 ± 0.08 millimeters.
-102 1/16 x 1/4 x3/32 .049 .005 1.24 0.10-103 3/32 x 9/32 x3/32 .081 .005 2.06 0.13-104 1/8 x 5/16 x3/32 .112 .005 2.84 0.13-105 5/32 x 11/32 x3/32 .143 .005 3.63 0.13
-106 3/16 x 3/8 x3/32 .174 .005 4.42 0.13-107 7/32 x 13/32 x3/32 .206 .005 5.23 0.13-108 1/4 x 7/16 x3/32 .237 .005 6.02 0.13-109 5/16 x 1/2 x3/32 .299 .005 7.59 0.13-110 AN 6227B-8 -110 AN 123863 3/8 x 9/16 x3/32 .362 .005 9.19 0.13
-111 AN 6227B-9 -111 AN 123864 7/16 x 5/8 x3/32 .424 .005 10.77 0.13-112 AN 6227B-10 -112 AN 123865 1/2 x 11/16 x3/32 .487 .005 12.37 0.13-113 AN 6227B-11 -113 AN 123866 9/16 x 3/4 x3/32 .549 .007 13.94 0.18-114 AN 6227B-12 -114 AN 123867 5/8 x 13/16 x3/32 .612 .009 15.54 0.23-115 AN 6227B-13 -115 AN 123868 11/16 x 7/8 x3/32 .674 .009 17.12 0.23
-116 AN 6227B-14 -116 AN 123869 3/4 x 15/16 x3/32 .737 .009 18.72 0.23-117 -117 13/16 x 1 x3/32 .799 .010 20.29 0.25-118 -118 7/8 x1-1/16 x3/32 .862 .010 21.89 0.25-119 -119 15/16 x1-1/8 x3/32 .924 .010 23.47 0.25-120 -120 1 x1-3/16 x3/32 .987 .010 25.07 0.25
-121 -121 1-1/16 x1-1/4 x3/32 1.049 .010 26.64 0.25-122 -122 1-1/8 x1-5/16 x3/32 1.112 .010 28.24 0.25-123 -123 1-3/16 x1-3/8 x3/32 1.174 .012 29.82 0.30-124 -124 1-1/4 x1-7/16 x3/32 1.237 .012 31.42 0.30-125 -125 1-5/16 x1-1/2 x3/32 1.299 .012 32.99 0.30
-126 -126 1-3/8 x1-9/16 x3/32 1.362 .012 34.59 0.30-127 -127 1-7/16 x1-5/8 x3/32 1.424 .012 36.17 0.30-128 -128 1-1/2 x1-11/16 x3/32 1.487 .012 37.77 0.30-129 -129 1-9/16 x1-3/4 x3/32 1.549 .015 39.34 0.38-130 -130 1-5/8 x1-13/16 x3/32 1.612 .015 40.94 0.38
-131 -131 1-11/16 x1-7/8 x3/32 1.674 .015 42.52 0.38-132 -132 1-3/4 x1-15/16 x3/32 1.737 .015 44.12 0.38-133 -133 1-13/16 x 2 x3/32 1.799 .015 45.69 0.38-134 -134 1-7/8 x2-1/16 x3/32 1.862 .015 47.29 0.38-135 -135 1-15/16 x2-1/8 x3/32 1.925 .017 48.90 0.43
-136 -136 2 x2-3/16 x3/32 1.987 .017 50.47 0.43-137 -137 2-1/16 x2-1/4 x3/32 2.050 .017 52.07 0.43-138 -138 2-1/8 x2-5/16 x3/32 2.112 .017 53.64 0.43-139 -139 2-3/16 x2-3/8 x3/32 2.175 .017 55.25 0.43-140 -140 2-1/4 x2-7/16 x3/32 2.237 .017 56.82 0.43
-004 to -050 Cross Section Diameters = .070 ± .003 inches— 1.78 ± 0.08 millimeters.
Standard O-Ring Sizes and Dimensions (Continued)
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety ofcompounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkagerates (other thanAN) will produce slightly different dimensions and tolerances.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 8
9
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
METRICINCH STANDARD
NOMINALSIZE STANDARD (MM)
I.D. O.D. C.S. I.D. ± I.D. ±
-141 -141 2-5/16 x2-1/2 x3/32 2.300 .020 58.42 0.51-142 -142 2-3/8 x2-9/16 x3/32 2.362 .020 59.99 0.51-143 -143 2-7/16 x2-5/8 x3/32 2.425 .020 61.60 0.51-144 -144 2-1/2 x2-11/16 x3/32 2.487 .020 63.17 0.51-145 -145 2-9/16 x2-3/4 x3/32 2.550 .020 64.77 0.51
-146 -146 2-5/8 x2-13/16 x3/32 2.612 .020 66.34 0.51-147 -147 2-11/16 x2-7/8 x3/32 2.675 .022 67.95 0.56-148 -148 2-3/4 x2-15/16 x3/32 2.737 .022 69.52 0.56-149 -149 2-13/16 x 3 x3/32 2.800 .022 71.12 0.56-150 -150* 2-7/8 x3-1/16 x3/32 2.862 .022 72.69 0.56
-151 -151* 3 x3-3/16 x3/32 2.987 .024 75.87 0.61-152 -152* 3-1/4 x3-7/16 x3/32 3.237 .024 82.22 0.61-153 -153* 3-1/2 x3-11/16 x3/32 3.487 .024 88.57 0.61-154 -154* 3-3/4 x3-15/16 x3/32 3.737 .028 94.92 0.71-155 -155* 4 x4-3/16 x3/32 3.987 .028 101.27 0.71
-156 -156* 4-1/4 x4-7/16 x3/32 4.237 .030 107.62 0.76-157 -157* 4-1/2 x4-11/16 x3/32 4.487 .030 113.97 0.76-158 -158* 4-3/4 x4-15/16 x3/32 4.737 .030 120.32 0.76-159 -159* 5 x5-3/16 x3/32 4.987 .035 126.67 0.89-160 -160* 5-1/4 x5-7/16 x3/32 5.237 .035 133.02 0.89
-161 -161* 5-1/2 x5-11/16 x3/32 5.487 .035 139.37 0.89-162 -162* 5-3/4 x5-15/16 x3/32 5.737 .035 145.72 0.89-163 -163*†† 6 x6-3/16 x3/32 5.987 .035 152.07 0.89-164 -164*†† 6-1/4 x6-7/16 x3/32 6.237 .040 158.42 1.02-165 -165*†† 6-1/2 x6-11/16 x3/32 6.487 .040 164.77 1.02
-166 -166*†† 6-3/4 x6-15/16 x3/32 6.737 .040 171.12 1.02-167 -167*†† 7 x7-3/16 x3/32 6.987 .040 177.47 1.02-168 -168*†† 7-1/4 x7-7/16 x3/32 7.237 .045 183.82 1.14-169 -169*†† 7-1/2 x7-11/16 x3/32 7.487 .045 190.17 1.14-170 -170*†† 7-3/4 x7-15/16 x3/32 7.737 .045 196.52 1.14
-171 -171*†† 8 x8-3/16 x3/32 7.987 .045 202.87 1.14-172 -172*†† 8-1/4 x8-7/16 x3/32 8.237 .050 209.22 1.27-173 -173*†† 8-1/2 x8-11/16 x3/32 8.487 .050 215.57 1.27-174 -174*†† 8-3/4 x8-15/16 x3/32 8.737 .050 221.92 1.27-175 -175*†† 9 x9-3/16 x3/32 8.987 .050 228.27 1.27
-176 -176*†† 9-1/4 x9-7/16 x3/32 9.237 .055 234.62 1.40-177 -177*†† 9-1/2 x9-11/16 x3/32 9.487 .055 240.97 1.40-178 -178*†† 9-3/4 x9-15/16 x3/32 9.737 .055 247.32 1.40
-201 to -284 Cross Section Diameters = .139 + .004 inches— 3.53 + 0.10 millimeters.
-201 3/16 x 7/16 x1/8 .171 .005 4.34 0.13-202 1/4 x 1/2 x1/8 .234 .005 5.94 0.13-203 5/16 x 9/16 x1/8 .296 .005 7.52 0.13-204 3/8 x 5/8 x1/8 .359 .005 9.12 0.13-205 7/16 x 11/16 x1/8 .421 .005 10.69 0.13
MS 28775MS 29513
AN 6227B MS 29561 AN 1238561AND MS 9021 TO
AN 6230B MS 9068 AN 123934NAS 1593NAS 1594
AS-568A NAS 1611UNIVERSAL
DASH PART DASH PARTNUMBERS NUMBERS NUMBERS NUMBERS
-102 to -178 Cross Section Diameters = .103 + .003 inches— 2.62 + 0.08 millimeters.
1 ForAN 123956 toAN 124034, add 100 to part numbers shown in this column.* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.** These dash numbers are not included in MS 9068, MS 29561, NAS 1593 or NAS 1594 series.
Standard O-Ring Sizes and Dimensions (Continued)
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety ofcompounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkagerates (other thanAN) will produce slightly different dimensions and tolerances.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 9
10
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
METRICINCH STANDARD
NOMINALSIZE STANDARD (MM)
I.D. O.D. C.S. I.D. ± I.D. ±
MS 28775MS 29513
AN 6227B MS 29561 AN 1238561AND MS 9021 TO
AN 6230B MS 9068 AN 123934NAS 1593NAS 1594
AS-568A NAS 1611UNIVERSAL
DASH PART DASH PARTNUMBERS NUMBERS NUMBERS NUMBERS
-206 1/2 x 3/4 x1/8 .484 .005 12.29 0.13-207 9/16 x 13/16 x1/8 .546 .007 13.87 0.18-208 5/8 x 7/8 x1/8 .609 .009 15.47 0.23-209 11/16 x 15/16 x1/8 .671 .009 17.04 0.23-210 AN 6227B-15 -210 AN 123870 3/4 x 1 x1/8 .734 .010 18.64 0.25
-211 AN 6227B-16 -211 AN 123871 13/16 x1-1/16 x1/8 .796 .010 20.22 0.25-212 AN 6227B-17 -212 AN 123872 7/8 x1-1/8 x1/8 .859 .010 21.82 0.25-213 AN 6227B-18 -213 AN 123873 15/16 x1-3/16 x1/8 .921 .010 23.39 0.25-214 AN 6227B-19 -214 AN 123874 1 x1-1/4 x1/8 .984 .010 24.99 0.25-215 AN 6227B-20 -215 AN 123875 1-1/16 x1-5/16 x1/8 1.046 .010 26.57 0.25
-216 AN 6227B-21 -216 AN 123876 1-1/8 x1-3/8 x1/8 1.109 .012 28.17 0.30-217 AN 6227B-22 -217 AN 123877 1-3/16 x1-7/16 x1/8 1.171 .012 29.74 0.30-218 AN 6227B-23 -218 AN 123878 1-1/4 x1-1/2 x1/8 1.234 .012 31.34 0.30-219 AN 6227B-24 -219 AN 123879 1-5/16 x1-9/16 x1/8 1.296 .012 32.92 0.30-220 AN 6227B-25 -220 AN 123880 1-3/8 x1-5/8 x1/8 1.359 .012 34.52 0.30
-221 AN 6227B-26 -221 AN 123881 1-7/16 x1-11/16 x1/8 1.421 .012 36.09 0.30-222 AN 6227B-27 -222 AN 123882 1-1/2 x1-3/4 x1/8 1.484 .015 37.69 0.38-223 AN 6230B-1 -223 AN 123883 1-5/8 x1-7/8 x1/8 1.609 .015 40.87 0.38-224 AN 6230B-2 -224 AN 123884 1-3/4 x 2 x1/8 1.734 .015 44.04 0.38-225 AN 6230B-3 -225 AN 123885 1-7/8 x2-1/8 x1/8 1.859 .018 47.22 0.46
-226 AN 6230B-4 -226 AN 123886 2 x2-1/4 x1/8 1.984 .018 50.39 0.46-227 AN 6230B-5 -227 AN 123887 2-1/8 x2-3/8 x1/8 2.109 .018 53.57 0.46-228 AN 6230B-6 -228 AN 123888 2-1/4 x2-1/2 x1/8 2.234 .020 56.74 0.51-229 AN 6230B-7 -229 AN 123889 2-3/8 x2-5/8 x1/8 2.359 .020 59.92 0.51-230 AN 6230B-8 -230 AN 123890 2-1/2 x2-3/4 x1/8 2.484 .020 63.09 0.51
-231 AN 6230B-9 -231 AN 123891 2-5/8 x2-7/8 x1/8 2.609 .020 66.27 0.51-232 AN 6230B-10 -232 AN 123892 2-3/4 x 3 x1/8 2.734 .024 69.44 0.61-233 AN 6230B-11 -233 AN 123893 2-7/8 x3-1/8 x1/8 2.859 .024 72.62 0.61-234 AN 6230B-12 -234 AN 123894 3 x3-1/4 x1/8 2.984 .024 75.79 0.61-235 AN 6230B-13 -235 AN 123895 3-1/8 x3-3/8 x1/8 3.109 .024 78.97 0.61
-236 AN 6230B-14 -236 AN 123896 3-1/4 x3-1/2 x1/8 3.234 .024 82.14 0.61-237 AN 6230B-15 -237 AN 123897 3-3/8 x3-5/8 x1/8 3.359 .024 85.32 0.61-238 AN 6230B-16 -238 AN 123898 3-1/2 x3-3/4 x1/8 3.484 .024 88.49 0.61-239 AN 6230B-17 -239 AN 123899 3-5/8 x3-7/8 x1/8 3.609 .028 91.67 0.71-240 AN 6230B-18 -240 AN 123900 3-3/4 x 4 x1/8 3.734 .028 94.84 0.71
-241 AN 6230B-19 -241 AN 123901 3-7/8 x4-1/8 x1/8 3.859 .028 98.02 0.71-242 AN 6230B-20 -242 AN 123902 4 x4-1/4 x1/8 3.984 .028 101.19 0.71-243 AN 6230B-21 -243 AN 123903 4-1/8 x4-3/8 x1/8 4.109 .028 104.37 0.71-244 AN 6230B-22 -244 AN 123904 4-1/4 x4-1/2 x1/8 4.234 .030 107.54 0.76-245 AN 6230B-23 -245 AN 123905 4-3/8 x4-5/8 x1/8 4.359 .030 110.72 0.76
-246 AN 6230B-24 -246 AN 123906 4-1/2 x4-3/4 x1/8 4.484 .030 113.89 0.76-247 AN 6230B-25 -247 AN 123907 4-5/8 x4-7/8 x1/8 4.609 .030 117.07 0.76-248 AN 6230B-26 -248† AN 123908 4-3/4 x 5 x1/8 4.734 .030 120.24 0.76-249 AN 6230B-27 -249† AN 123909 4-7/8 x5-1/8 x1/8 4.859 .035 123.42 0.89-250 AN 6230B-28 -250† AN 123910 5 x5-1/4 x1/8 4.984 .035 126.59 0.89
-201 to -284 Cross Section Diameters = .139 ± .004 inches— 3.53 ± 0.10 millimeters.
1 ForAN 123956 toAN 124034, add 100 to part numbers shown in this column.† These dash numbers are not included in MS 28775 series.
Standard O-Ring Sizes and Dimensions (Continued)
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety ofcompounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkagerates (other thanAN) will produce slightly different dimensions and tolerances.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 10
11
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
METRICINCH STANDARD
NOMINALSIZE STANDARD (MM)
I.D. O.D. C.S. I.D. ± I.D. ±
MS 28775MS 29513
AN 6227B MS 29561 AN 1238561AND MS 9021 TO
AN 6230B MS 9068 AN 123934NAS 1593NAS 1594
AS-568A NAS 1611UNIVERSAL
DASH PART DASH PARTNUMBERS NUMBERS NUMBERS NUMBERS
-251 AN 6230B29 -251† AN 123911 5-1/8 x5-3/8 x1/8 5.109 .035 129.77 0.89-252 AN 6230B30 -252† AN 123912 5-1/4 x5-1/2 x1/8 5.234 .035 132.94 0.89-253 AN 6230B31 -253† AN 123913 5-3/8 x5-5/8 x1/8 5.359 .035 136.12 0.89-254 AN 6230B32 -254† AN 123914 5-1/2 x5-3/4 x1/8 5.484 .035 139.29 0.89-255 AN 6230B33 -255† AN 123915 5-5/8 x5-7/8 x1/8 5.609 .035 142.47 0.89
-256 AN 6230B34 -256† AN 123916 5-3/4 x 6 x1/8 5.734 .035 145.64 0.89-257 AN 6230B35 -257† AN 123917 5-7/8 x6-1/8 x1/8 5.859 .035 148.82 0.89-258 AN 6230B36 -258† AN 123918 6 x6-1/4 x1/8 5.984 .035 151.99 0.89-259 AN 6230B37 -259† AN 123919 6-1/4 x6-1/2 x1/8 6.234 .040 158.34 1.02-260 AN 6230B38 -260† AN 123920 6-1/2 x6-3/4 x1/8 6.484 .040 164.69 1.02
-261 AN 6230B39 -261† AN 123921 6-3/4 x 7 x1/8 6.734 .040 171.04 1.02-262 AN 6230B40 -262† AN 123922 7 x7-1/4 x1/8 6.984 .040 177.39 1.02-263 AN 6230B41 -263† AN 123923 7-1/4 x7-1/2 x1/8 7.234 .045 183.74 1.14-264 AN 6230B42 -264† AN 123924 7-1/2 x7-3/4 x1/8 7.484 .045 190.09 1.14-265 AN 6230B43 -265† AN 123925 7-3/4 x 8 x1/8 7.734 .045 196.44 1.14
-266 AN 6230B44 -266† AN 123926 8 x8-1/4 x1/8 7.984 .045 202.79 1.14-267 AN 6230B45 -267† AN 123927 8-1/4 x8-1/2 x1/8 8.234 .050 209.14 1.27-268 AN 6230B46 -268† AN 123928 8-1/2 x8-3/4 x1/8 8.484 .050 215.49 1.27-269 AN 6230B47 -269† AN 123929 8-3/4 x 9 x1/8 8.734 .050 221.84 1.27-270 AN 6230B48 -270† AN 123930 9 x9-1/4 x1/8 8.984 .050 228.19 1.27
-271 AN 6230B49 -271† AN 123931 9-1/4 x9-1/2 x1/8 9.234 .055 234.54 1.40-272 AN 6230B50 -272† AN 123932 9-1/2 x9-3/4 x1/8 9.484 .055 240.89 1.40-273 AN 6230B51 -273† AN 123933 9-3/4 x 10 x1/8 9.734 .055 247.24 1.40-274 AN 6230B52 -274† AN 123934 10 x10-1/4 x1/8 9.984 .055 253.59 1.40-275 -275* 10-1/2 x10-3/4 x1/8 10.484 .055 266.29 1.40
-276 -276* 11 x11-1/4 x1/8 10.984 .065 278.99 1.65-277 -277* 11-1/2 x11-3/4 x1/8 11.484 .065 291.69 1.65-278 -278* 12 x12-1/4 x1/8 11.984 .065 304.39 1.65-279 -279* 13 x13-1/4 x1/8 12.984 .065 329.79 1.65-280 -280* 14 x14-1/4 x1/8 13.984 .065 355.19 1.65
-281 -281* 15 x15-1/4 x1/8 14.984 .065 380.59 1.65-282 -282*†† 16 x16-1/4 x1/8 15.955 .075 405.26 1.90-283 -283*†† 17 x17-1/4 x1/8 16.955 .080 430.66 2.03-284 -284*†† 18 x18-1/4 x1/8 17.955 .085 456.06 2.16
-309 to -395 Cross Section Diameters = .210 ± .005 inches— 5.33 ± 0.13 millimeters.
-309 7/16 x13/16 x3/16 .412 .005 10.46 0.13-310 1/2 x7/8 x3/16 .475 .005 12.07 0.13
-311 9/16 x15/16 x3/16 .537 .007 13.64 0.18-312 5/8 x1 x3/16 .600 .009 15.24 0.23-313 11/16 x1-1/16 x3/16 .662 .009 16.81 0.23-314 3/4 x1-1/8 x3/16 .725 .010 18.42 0.25-315 13/16 x1-3/16 x3/16 .787 .010 19.99 0.25
-201 to -284 Cross Section Diameters = .139 ± .004 inches— 3.53 ± 0.10 millimeters.
1 ForAN 123956 toAN 124034, add 100 to part numbers shown in this column.* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.† These dash numbers are not included in MS 28775.†† These dash numbers are not included in MS 9068, NAS 1593 or NAS 1594.
Standard O-Ring Sizes and Dimensions (Continued)
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety ofcompounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkagerates (other thanAN) will produce slightly different dimensions and tolerances.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 11
12
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
METRICINCH STANDARD
NOMINALSIZE STANDARD (MM)
I.D. O.D. C.S. I.D. ± I.D. ±
MS 28775MS 29513
AN 6227B MS 29561 AN 1238561AND MS 9021 TO
AN 6230B MS 9068 AN 123934NAS 1593NAS 1594
AS-568A NAS 1611UNIVERSAL
DASH PART DASH PARTNUMBERS NUMBERS NUMBERS NUMBERS
-316 7/8 x1-1/4 x3/16 .850 .010 21.59 0.25-317 15-16 x1-5/16 x3/16 .912 .010 23.16 0.25-318 1 x1-3/8 x3/16 .975 .010 24.77 0.25-319 1-1/16 x1-7/16 x3/16 1.037 .010 26.34 0.25-320 1-1/8 x1-1/2 x3/16 1.100 .012 27.94 0.30
-321 1-3/16 x1-9/16 x3/16 1.162 .012 29.51 0.30-322 1-1/4 x1-5/8 x3/16 1.225 .012 31.12 0.30-323 1-5/16 x1-11/16 x3/16 1.287 .012 32.69 0 30-324 1-3/8 x1-3/4 x3/16 1.350 .012 34.29 0.30-325 AN 6227B-28 -325 1-1/2 x1-7/8 x3/16 1.475 .015 37.47 0.38
-326 AN 6227B-29 -326 1-5/8 x 2 x3/16 1.600 .015 40.64 0.38-327 AN 6227B-30 -327 1-3/4 x2-1/8 x3/16 1.725 .015 43.82 0.38-328 AN 6227B-31 -328 1-7/8 x2-1/4 x3/16 1.850 .015 46.99 0.38-329 AN 6227B-32 -329 2 x2-3/8 x3/16 1.975 .018 50.17 0.46-330 AN 6227B-33 -330 2-1/8 x2-1/2 x3/16 2.100 .018 53.34 0.46
-331 AN 6227B-34 -331 2-1/4 x2-5/8 x3/16 2.225 .018 56.52 0.46-332 AN 6227B-35 -332 2-3/8 x2-3/4 x3/16 2.350 .018 59.69 0.46-333 AN 6227B-36 -333 2-1/2 x2-7/8 x3/16 2.475 .020 62.87 0.51-334 AN 6227B-37 -334 2-5/8 x 3 x3/16 2.600 .020 66.04 0.51-335 AN 6227B-38 -335 2-3/4 x3-1/8 x3/16 2.725 .020 69.22 0.51
-336 AN 6227B-39 -336 2-7/8 x3-1/4 x3/16 2.850 .020 72.39 0.51-337 AN 6227B-40 -337 3 x3-3/8 x3/16 2.975 .024 75.57 0.61-338 AN 6227B-41 -338 3-1/8 x3-1/2 x3/16 3.100 .024 78.74 0.61-339 AN 6227B-42 -339 3-1/4 x3-5/8 x3/16 3.225 .024 81.92 0.61-340 AN 6227B-43 -340 3-3/8 x3-3/4 x3/16 3.350 .024 85.09 0.61
-341 AN 6227B-44 -341 3-1/2 x3-7/8 x3/16 3.475 .024 88.27 0.61-342 AN 6227B-45 -342 3-5/8 x 4 x3/16 3.600 .028 91.44 0.71-343 AN 6227B-46 -343 3-3/4 x4-1/8 x3/16 3.725 .028 94.62 0.71-344 AN 6227B-47 -344 3-7/8 x4-1/4 x3/16 3.850 .028 97.79 0.71-345 AN 6227B-48 -345 4 x4-3/8 x3/16 3.975 .028 100.97 0.71
-346 AN 6227B-49 -346 4-1/8 x4-1/2 x3/16 4.100 .028 104.14 0.71-347 AN 6227B-50 -347 4-1/4 x4-5/8 x3/16 4.225 .030 107.32 0.76-348 AN 6227B-51 -348 4-3/8 x4-3/4 x3/16 4.350 .030 110.49 0.76-349 AN 6227B-52 -349 4-1/2 x4-7/8 x3/16 4.475 .030 113.67 0.76-350 -350*†† 4-5/8 x 5 x3/16 4.600 .030 116.84 0.76
-351 -351*†† 4-3/4 x5-1/8 x3/16 4.725 .030 120.02 0.76-352 -352*†† 4-7/8 x5-1/4 x3/16 4.850 .030 123.19 0 76-353 -353*†† 5 x5-3/8 x3/16 4.975 .037 126.37 0.94-354 -354*†† 5-1/8 x5-1/2 x3/16 5.100 .037 129.54 0.94-355 -355*†† 5-1/4 x5-5/8 x3/16 5.225 .037 132.72 0 94
-356 -356*†† 5-3/8 x5-3/4 x3/16 5.350 .037 135.89 0.94-357 -357*†† 5-1/2 x5-7/8 x3/16 5.475 .037 139.07 0.94-358 -358*†† 5-5/8 x 6 x3/16 5.600 .037 142.24 0.94-359 -359*†† 5-3/4 x6-1/8 x3/16 5.725 .037 145.42 0.94-360 -360*†† 5-7/8 x6-1/4 x3/16 5.850 .037 148.59 0.94
-309 to -395 Cross Section Diameters = .210 ± .005 inches— 5.33 ± 0.13 millimeters.
1 ForAN 123956 toAN 124034, add 100 to part numbers shown in this column.* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.
†† These dash numbers are not included in MS 9068, NAS 1593 or NAS 1594.
Standard O-Ring Sizes and Dimensions (Continued)
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety ofcompounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkagerates (other thanAN) will produce slightly different dimensions and tolerances.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 12
13
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
METRICINCH STANDARD
NOMINALSIZE STANDARD (MM)
I.D. O.D. C.S. I.D. ± I.D. ±
MS 28775MS 29513
AN 6227B MS 29561 AN 1238561AND MS 9021 TO
AN 6230B MS 9068 AN 123934NAS 1593NAS 1594
AS-568A NAS 1611UNIVERSAL
DASH PART DASH PARTNUMBERS NUMBERS NUMBERS NUMBERS
-361 -361*†† 6 x6-3/8 x3/16 5.975 .037 151.77 0.94-362 -362*†† 6-1/4 x6-5/8 x3/16 6.225 .040 158.12 1.02-363 -363*†† 6-1/2 x6-7/8 x3/16 6.475 .040 164.47 1.02-364 -364*†† 6-3/4 x7-1/8 x3/16 6.725 .040 170.82 1.02-365 -365*†† 7 x7-3/8 x3/16 6.975 .040 177.17 1.02
-366 -366*†† 7-1/4 x7-5/8 x3/16 7.225 .045 183.52 1.14-367 -367*†† 7-1/2 x7-7/8 x3/16 7.475 .045 189.87 1.14-368 -368*†† 7-3/4 x8-1/8 x3/16 7.725 .045 196.22 1 14-369 -369*†† 8 x8-3/8 x3/16 7.975 .045 202.57 1.14-370 -370*†† 8-1/4 x8-5/8 x3/16 8.225 .050 208.92 1.27
-371 -371*†† 8-1/2 x8-7/8 x3/16 8.475 .050 215.27 1.27-372 -372*†† 8-3/4 x9-1/8 x3/16 8.725 .050 221.62 1.27-373 -373*†† 9 x9-3/8 x3/16 8.975 .050 227.97 1.27-374 -374*†† 9-1/4 x9-5/8 x3/16 9.225 .055 234.32 1.40-375 -375*†† 9-1/2 x9-7/8 x3/16 9.475 .055 240.67 1.40
-376 -376*†† 9-3/4 x10-1/8 x3/16 9.725 .055 247.02 1.40-377 -377*†† 10 x10-3/8 x3/16 9.975 .055 253.37 1.40-378 -378*†† 10-1/2 x10-7/8 x3/16 10.475 .060 266.07 1.52-379 -379*†† 11 x11-3/8 x3/16 10.975 .060 278.77 1.52-380 -380*†† 11-1/2 x11-7/8 x3/16 11.475 .065 291.47 1.65
-381 -381*†† 12 x12-3/8 x3/16 11.975 .065 304.17 1.65-382 -382*†† 13 x13-3/8 x3/16 12.975 .065 329.57 1.65-383 -383*†† 14 x14-3/8 x3/16 13.975 .070 354.97 1.78-384 -384*†† 15 x15-3/8 x3/16 14.975 .070 380.37 1.78-385 -385*†† 16 x16-3/8 x3/16 15.955 .075 405.26 1.90
-386 -386*†† 17 x17-3/8 x3/16 16.955 .080 430.66 2.03-387 -387*†† 18 x18-3/8 x3/16 17.955 .085 456.06 2.16-388 -388*†† 19 x19-3/8 x3/16 18.955 .090 481.38 2.29-389 -389*†† 20 x20-3/8 x3/16 19.955 .095 506.78 2.41-390 -390*†† 21 x21-3/8 x3/16 20.955 .095 532.18 2.41
-391 -391*†† 22 x22-3/8 x3/16 21.955 .095 557.58 2.41-392 -392*†† 23 x23-3/8 x3/16 22.940 .105 582.68 2.67-393 -393*†† 24 x24-3/8 x3/16 23.940 .110 608.08 2.79-394 -394*†† 25 x25-3/8 x3/16 24.940 .115 633.48 2.92-395 -395*†† 26 x26-3/8 x3/16 25.940 .120 658.88 3.05
-400*** 1-3/8 x1-7/8 x1/4 1.350 .014 34.29 0.36-401*** 1-1/2 x2 x1/4 1.475 .014 37.47 0.36-402*** 1-5/8 x2-1/8 x1/4 1.600 .015 40.64 0.38-403*** 1-3/4 x2-1/4 x1/4 1.725 .016 43.82 0.41-404*** 1-7/8 x2-3/8 x1/4 1.850 .017 46.99 0.43
-309 to -395 Cross Section Diameters = .210 ± .005 inches— 5.33 ± 0.13 millimeters.
1 ForAN 123956 toAN 124034, add 100 to part numbers shown in this column.* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.
*** Dash numbers 400-424 are not listed onAS 568A, but are stock items atAmerican Packing in selected compounds.†† These dash numbers are not included in MS 9068, NAS 1593 or NAS 1594.
Standard O-Ring Sizes and Dimensions (Continued)
-400 to -424 Cross Section Diameters = .275 ± .006 inches— 6.99 ± 0.15 millimeters.
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety ofcompounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkagerates (other thanAN) will produce slightly different dimensions and tolerances.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 13
14
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
METRICINCH STANDARD
NOMINALSIZE STANDARD (MM)
I.D. O.D. C.S. I.D. ± I.D. ±
MS 28775MS 29513
AN 6227B MS 29561 AN 1238561AND MS 9021 TO
AN 6230B MS 9068 AN 123934NAS 1593NAS 1594
AS-568A NAS 1611UNIVERSAL
DASH PART DASH PARTNUMBERS NUMBERS NUMBERS NUMBERS
-405*** 2 x2-1/2 x1/4 1.975 .017 50.17 0.43-406*** 2-1/8 x2-5/8 x1/4 2.100 .018 53.34 0.46-407*** 2-1/4 x2-3/4 x1/4 2.225 .018 56.52 0.46-408*** 2-3/8 x2-7/8 x1/4 2.350 .018 59.69 0.46-409*** 2-1/2 x3 x1/4 2.475 .018 62.87 0.46
-410*** 2-5/8 x3-1/8 x1/4 2.600 .018 66.04 0.46-411*** 2-3/4 x3-1/4 x1/4 2.725 .022 69.22 0.56-412*** 2-7/8 x3-3/8 x1/4 2.850 .022 72.39 0.56-413*** 3 x3-1/2 x1/4 2.975 .024 75.57 0.61-414*** 3-1/8 x3-5/8 x1/4 3.100 .024 78.74 0.61
-415*** 3-1/4 x3-3/4 x1/4 3.225 .024 81.92 0.61-416*** 3-3/8 x3-7/8 x1/4 3.350 .026 85.09 0.66-417*** 3-1/2 x4 x1/4 3.475 .026 88.27 0.66-418*** 3-5/8 x4-1/8 x1/4 3.600 .026 91.44 0.66-419*** 3-3/4 x4-1/4 x1/4 3.725 .028 94.62 0.71
-420*** 3-7/8 x4-3/8 x1/4 3.850 .028 97.79 0.71-421*** 4 x4-1/2 x1/4 3.975 .028 100.97 0.71-422*** 4-1/8 x4-5/8 x1/4 4.100 .030 104.14 0.76-423*** 4-1/4 x4-3/4 x1/4 4.225 .030 107.32 0.76-424*** 4-3/8 x4-7/8 x1/4 4.350 .030 110.49 0.76
-425 to -475 Cross Section Diameters = .275 ± .006 inches— 6.99 ± 0.15 millimeters.
-425 AN 6227B-88 -425 4-1/2 x5 x1/4 4.475 .033 113.67 0.84-426 AN 6227B-53 -426 4-5/8 x5-1/8 x1/4 4.600 .033 116.84 0.84-427 AN 6227B-54 -427 4-3/4 x5-1/4 x1/4 4.725 .033 120.02 0.84-428 AN 6227B-55 -428 4-7/8 x5-3/8 x1/4 4.850 .033 123.19 0.84-429 AN 6227B-56 -429 5 x5-1/2 x1/4 4.975 .037 126.37 0.94-430 AN 6227B-57 -430 5-1/8 x5-5/8 x1/4 5.100 .037 129.54 0.94
-431 AN 6227B-58 -431 5-1/4 x5-3/4 x1/4 5.225 .037 132.72 0.94-432 AN 6227B-59 -432 5-3/8 x5-7/8 x1/4 5.350 .037 135.89 0.94-433 AN 6227B-60 -433 5-1/2 x6 x1/4 5.475 .037 139.07 0.94-434 AN 6227B-61 -434 5-5/8 x6-1/8 x1/4 5.600 .037 142.24 0.94-435 AN 6227B-62 -435 5-3/4 x6-1/4 x1/4 5.725 .037 145.42 0.94
-436 AN 6227B-63 -436 5-7/8 x6-3/8 x1/4 5.850 .037 148.59 0.94-437 AN 6227B-64 -437 6 x6-1/2 x1/4 5.975 .037 151.77 0.94-438 AN 6227B-65 -438 6-1/4 x6-3/4 x1/4 6.225 .040 158.12 1.02-439 AN 6227B-66 -439 6-1/2 x7 x1/4 6.475 .040 164.47 1.02-440 AN 6227B-67 -440 6-3/4 x7-1/4 x1/4 6.725 .040 170.82 1.02
-441 AN 6227B-68 -441 7 x7-1/2 x1/4 6.975 .040 177.17 1.02-442 AN 6227B-69 -442 7-1/4 x7-3/4 x1/4 7.225 .045 183.52 1.14-443 AN 6227B-70 -443 7-1/2 x8 x1/4 7.475 .045 189.87 1.14-444 AN 6227B-71 -444 7-3/4 x8-1/4 x1/4 7.725 .045 196.22 1.14-445 AN 6227B-72 -445 8 x8-1/2 x1/4 7.975 .045 202.57 1.14
-400 to -424 Cross Section Diameters = .275 ± .006 inches— 6.99 ± 0.15 millimeters.
1 ForAN 123956 toAN 124034, add 100 to part numbers shown in this column.*** Dash numbers 400-424 are not listed onAS 568A, but are stock items atAmerican Packing in selected compounds.
Standard O-Ring Sizes and Dimensions (Continued)
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety ofcompounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkagerates (other thanAN) will produce slightly different dimensions and tolerances.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 14
15
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
METRICINCH STANDARD
NOMINALSIZE STANDARD (MM)
I.D. O.D. C.S. I.D. ± I.D. ±
MS 28775MS 29513
AN 6227B MS 29561 AN 1238561AND MS 9021 TO
AN 6230B MS 9068 AN 123934NAS 1593NAS 1594
AS-568A NAS 1611UNIVERSAL
DASH PART DASH PARTNUMBERS NUMBERS NUMBERS NUMBERS
-446 AN 6227B-73 -446 8-1/2 x9 x1/4 8.475 .055 215.27 1.40-447 AN 6227B-74 -447 9 x9-1/2 x1/4 8.975 .055 227.97 1.40-448 AN 6227B-75 -448 9-1/2 x10 x1/4 9.475 .055 240.67 1.40-449 AN 6227B-76 -449 10 x10-1/2 x1/4 9.975 .055 253.37 1.40-450 AN 6227B-77 -450 10-1/2 x11 x1/4 10.475 .060 266.07 1.52
-451 AN 6227B-78 -451 11 x11-1/2 x1/4 10.975 .060 278.77 1.52-452 AN 6227B-79 -452 11-1/2 x12 x1/4 11.475 .060 291.47 1.52-453 AN 6227B-80 -453 12 x12-1/2 x1/4 11.975 .060 304.17 1.52-454 AN 6227B-81 -454 12-1/2 x13 x1/4 12.475 .060 316.87 1.52-455 AN 6227B-82 -455 13 x13-1/2 x1/4 12.975 .060 329.57 1.52
-456 AN 6227B-83 -456 13-1/2 x14 x1/4 13.475 .070 342.27 1.78-457 AN 6227B-84 -457 14 x14-1/2 x1/4 13.975 .070 354.97 1.78-458 AN 6227B-85 -458 14-1/2 x15 x1/4 14.475 .070 367.67 1.78-459 AN 6227B-86 -459 15 x15-1/2 x1/4 14.975 .070 380.37 1.78-460 AN 6227B-87 -460 15-1/2 x16 x1/4 15.475 .070 393.07 1.78
-461 -461*†† 16 x16-1/2 x1/4 15.955 .075 405.26 1.90-462 -462*†† 16-1/2 x17 x1/4 16.455 .075 417.96 1.90-463 -463*†† 17 x17-1/2 x1/4 16.955 .080 430.66 2.03-464 -464*†† 17-1/2 x18 x1/4 17.455 .085 443.36 2.15-465 -465*†† 18 x18-1/2 x1/4 17.955 .085 456.06 2.15
-466 -466*†† 18-1/2 x19 x1/4 18.455 .085 468.76 2.15-467 -467*†† 19 x19-1/2 x1/4 18.955 .090 481.46 2.29-468 -468*†† 19-1/2 x20 x1/4 19.455 .090 494.16 2.29-469 -469*†† 20 x20-1/2 x1/4 19.955 .095 506.86 2.41-470 -470*†† 21 x21-1/2 x1/4 20.955 .095 532.26 2.41
-471 -471*†† 22 x22-1/2 x1/4 21.955 .100 557.66 2.55-472 -472*†† 23 x23-1/2 x1/4 22.940 .105 582.68 2.67-473 -473*†† 24 x24-1/2 x1/4 23.940 .110 608.08 2.79-474 -474*†† 25 x25-1/2 x1/4 24.940 .115 633.48 2.92-475 -475*†† 26 x26-1/2 x1/4 25.940 .120 658.88 3.05
-425 to -475 Cross Section Diameters = .275 ± .006 inches— 6.99 ± 0.15 millimeters.
1 ForAN 123956 toAN 124034, add 100 to part numbers shown in this column.* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.
†† These dash numbers are not included in MS 9068, NAS 1593 or NAS 1594.
Standard O-Ring Sizes and Dimensions (Continued)
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety ofcompounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkagerates (other thanAN) will produce slightly different dimensions and tolerances.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:50 PM Page 15
16
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
*Dash Number Cross-References
*These charts are for size cross-reference only. “AN” O-Rings require special compounds.APGO-Rings are available in a variety of compounds.
AN 6227 /AS 568A
AN AS AN AS AN AS AN AS AN AS6227 568A 6227 568A 6227 568A 6227 568A 6227 568A
1 006 19 214 37 334 55 428 73 4462 007 20 215 38 335 56 429 74 4473 008 21 216 39 336 57 430 75 4484 009 22 217 40 337 58 431 76 4495 010 23 218 41 338 59 432 77 4506 011 24 219 42 339 60 433 78 4517 012 25 220 43 340 61 434 79 4528 110 26 221 44 341 62 435 80 4539 111 27 222 45 342 63 436 81 45410 112 28 325 46 343 64 437 82 45511 113 29 326 47 344 65 438 83 45612 114 30 327 48 345 66 439 84 45713 115 31 328 49 346 67 440 85 45814 116 32 329 50 347 68 441 86 45915 210 33 330 51 348 69 442 87 46016 211 34 331 52 349 70 443 88 42517 212 35 332 53 426 71 44418 213 36 333 54 427 72 445
AN 6230 /AS 568A
AN AS AN AS AN AS AN AS AN AS6230 568A 6230 568A 6230 568A 6230 568A 6230 568A
1 223 12 234 23 245 34 256 45 2672 224 13 235 24 246 35 257 46 2683 225 14 236 25 247 36 258 47 2694 226 15 237 26 248 37 259 48 2705 227 16 238 27 249 38 260 49 2716 228 17 239 28 250 39 261 50 2727 229 18 240 29 251 40 262 51 2738 230 19 241 30 252 41 263 52 2749 231 20 242 31 253 42 26410 232 21 243 32 254 43 26511 233 22 244 33 255 44 266
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:51 PM Page 16
17
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
O-Ring Boss GasketsFor Straight Thread Tube Fittings
-901 -01 3/32 .185 .005 4.70 .13 .056 .003 1.42 .08-902 -2 -02 1/8 .239 .005 6.07 .13 .064 .003 1.63 .08-903 -3 -03 3/16 .301 .005 7.65 .13 .064 .003 1.63 .08-904 -4 -04 1/4 .351 .005 8.92 .13 .072 .003 1.83 .08-905 -5 -05 5/16 .414 .005 10.52 .13 .072 .003 1.83 .08
-906 -6 -06 3/8 .468 .005 11.89 .13 .078 .003 1.98 .08-907 -07 7/16 .530 .007 13.46 .18 .082 .003 2.08 .08-908 -8 -08 1/2 .644 .009 16.36 .23 .087 .003 2.21 .08-909 -09 9/16 .706 .009 17.93 .23 .097 .003 2.46 .08-910 -10 -10 5/8 .755 .009 19.18 .23 .097 .003 2.46 .08
-911 -11 11/16 .863 .009 21.92 .23 .116 .004 2.95 .10-912 -12 -12 3/4 .924 .009 23.47 .23 .116 .004 2.95 .10-913 -13 13/16 .986 .010 25.04 .25 .116 .004 2.95 .10-914 -14 7/8 1.047 .010 26.59 .25 .116 .004 2.95 .10-916 -16 -16 1 1.171 .010 29.74 .25 .116 .004 2.95 .10
-918 -18 1-1/8 1.355 .012 34.42 .30 .116 .004 2.95 .10-920 -20 -20 1-1/4 1.475 .014 37.47 .36 .118 .004 3.00 .10-924 -24 -24 1-1/2 1.720 .014 43.69 .36 .118 .004 3.00 .10-928 -28 -28 1-3/4 2.090 .018 53.09 .46 .118 .004 3.00 .10-932 -32 -32 2 2.337 .018 59.36 .46 .118 .004 3.00 .10
AS 568ADASH
NUMBERS
NAS 1595NAS 1596
MS 28778NAS 617NAS 1612
DASHNUMBERS
TUBESIZE
O.D.INCHES
INCHSTANDARD
METRICSTANDARD
INCHSTANDARD
METRICSTANDARD
INSIDEDIAMETER
INSIDEDIAMETER
CROSS-SECTION
CROSS-SECTION
IN. IN.MM MM± ± ± ±
MS 9020MS 29512
DASHNUMBERS
NOTE: “NAS” and “MS” information is for size cross-reference only. “NAS and “MS” O-Rings require special compounds. APG O-Ringsare available in a variety of compounds.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:51 PM Page 17
18
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
0.70 X 1.800.80 X 22.800.81 X 5.360.84 X 6.100.90 X 22.800.97 X 2.54
1.00 X 1.151.00 X 1.251.00 X 1.501.00 X 1.801.00 X 2.001.00 X 2.501.00 X 2.701.00 X 3.001.00 X 3.301.00 X 3.501.00 X 4.001.00 X 4.501.00 X 5.001.00 X 5.501.00 X 6.001.00 X 6.501.00 X 7.001.00 X 7.201.00 X 7.501.00 X 8.001.00 X 8.501.00 X 9.001.00 X 9.501.00 X 10.001.00 X 10.501.00 X 11.001.00 X 11.501.00 X 12.001.00 X 12.501.00 X 13.001.00 X 13.501.00 X 14.001.00 X 14.501.00 X 15.001.00 X 15.501.00 X 16.001.00 X 16.501.00 X 17.001.00 X 17.501.00 X 18.001.00 X 18.501.00 X 19.001.00 X 19.501.00 X 20.001.00 X 20.501.00 X 21.00
Metric O-Rings *
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
1.00 X 21.501.00 X 22.001.00 X 22.501.00 X 23.001.00 X 23.501.00 X 24.001.00 X 24.501.00 X 25.001.00 X 28.001.00 X 29.401.00 X 29.901.00 X 30.501.00 X 31.801.00 X 32.001.00 X 39.001.00 X 42.001.00 X 60.00
1.02 X .74 -0011.02 X 1.78 -001-1/2BS606
1.02 X 2.54 BS607
1.15 X 42.10
1.19 X 4.32
1.20 X 2.501.20 X 2.601.20 X 3.501.20 X 5.001.20 X 24.001.20 X 26.001.20 X 28.001.20 X 35.001.20 X 40.001.20 X 53.501.20 X 98.00
1.25 X 3.801.25 X 8.001.25 X 16.00
1.27 X 1.07 -0021.27 X 3.251.27 X 3.911.27 X 4.47
1.30 X 2.501.30 X 8.001.30 X 10.001.30 X 11.001.30 X 13.501.30 X 20.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
1.42 X 4.70 -901
1.50 X 1.801.50 X 1.851.50 X 2.001.50 X 2.50 S31.50 X 2.801.50 X 3.001.50 X 3.50 S41.50 X 4.001.50 X 4.50 S51.50 X 5.001.50 X 5.50 S61.50 X 6.001.50 X 6.50 S71.50 X 7.001.50 X 7.50 S81.50 X 8.001.50 X 8.50 S91.50 X 9.001.50 X 9.50 S101.50 X 10.001.50 X 10.501.50 X 10.70 S11.21.50 X 11.001.50 X 11.50 S121.50 X 12.00 S12.51.50 X 12.501.50 X 13.001.50 X 13.251.50 X 13.50 S141.50 X 14.001.50 X 14.50 S151.50 X 15.001.50 X 15.50 S161.50 X 16.001.50 X 16.501.50 X 17.001.50 X 17.50 S181.50 X 18.001.50 X 18.501.50 X 19.001.50 X 19.50 S201.50 X 20.001.50 X 20.501.50 X 21.001.50 X 21.50 S221.50 X 22.001.50 X 22.501.50 X 23.001.50 X 23.501.50 X 24.001.50 X 24.50
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
1.50 X 25.001.50 X 25.501.50 X 26.001.50 X 26.501.50 X 27.001.50 X 27.501.50 X 28.001.50 X 28.501.50 X 29.001.50 X 29.501.50 X 30.001.50 X 30.501.50 X 31.001.50 X 31.501.50 X 32.001.50 X 32.501.50 X 33.001.50 X 33.501.50 X 34.001.50 X 34.501.50 X 35.001.50 X 35.501.50 X 36.001.50 X 36.501.50 X 37.001.50 X 37.501.50 X 38.001.50 X 38.501.50 X 39.001.50 X 39.501.50 X 40.001.50 X 41.001.50 X 42.001.50 X 43.001.50 X 44.001.50 X 45.001.50 X 46.001.50 X 47.001.50 X 48.001.50 X 49.001.50 X 50.001.50 X 51.001.50 X 52.001.50 X 53.001.50 X 54.001.50 X 55.001.50 X 56.001.50 X 57.001.50 X 58.001.50 X 59.001.50 X 60.001.50 X 61.001.50 X 62.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
*The following listing of metric O-Ring sizes includes cross referenceinformation for American Standard (AS 568A) O-Ring sizes, JapaneseMetric O-Rings, and British Standard Metric O-Rings. AS 568A dashnumbers are shaded; G, P, S, and V numbers are Japanese Metric O-Rings; and BS numbers are British Standard Metric O-Rings. This is acomprehensive listing, and APG stocks most of the sizes. Some sizes,however, are not commonly used and and are not standard stock items.Call for availability.
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:51 PM Page 18
19
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
1.50 X 63.001.50 X 64.001.50 X 65.001.50 X 66.001.50 X 67.001.50 X 68.001.50 X 69.001.50 X 70.001.50 X 71.001.50 X 72.001.50 X 73.001.50 X 74.001.50 X 75.001.50 X 76.001.50 X 77.001.50 X 78.001.50 X 79.001.50 X 80.001.50 X 81.001.50 X 82.001.50 X 83.001.50 X 84.001.50 X 85.001.50 X 86.001.50 X 87.001.50 X 88.001.50 X 89.001.50 X 90.001.50 X 91.001.50 X 92.001.50 X 93.001.50 X 94.001.50 X 95.001.50 X 96.001.50 X 97.001.50 X 98.001.50 X 99.001.50 X 100.00
1.52 X 1.42 -003
1.60 X 2.201.60 X 2.751.60 X 2.801.60 X 3.101.60 X 3.201.60 X 3.701.60 X 4.101.60 X 4.701.60 X 5.001.60 X 5.101.60 X 6.101.60 X 7.10
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
1.78 X 151.64 BS5551.78 X 154.81 BS5561.78 X 158.00 BS5571.78 X 161.16 BS5581.78 X 164.34 BS5591.78 X 167.51 BS5601.78 X 170.69 BS5611.78 X 173.87 BS562
1.80 X 1.801.80 X 2.001.80 X 2.241.80 X 2.501.80 X 2.801.80 X 3.151.80 X 3.551.80 X 3.751.80 X 4.001.80 X 4.501.80 X 4.871.80 X 5.001.80 X 5.151.80 X 5.301.80 X 5.601.80 X 6.001.80 X 6.301.80 X 6.701.80 X 6.901.80 X 7.101.80 X 7.501.80 X 8.001.80 X 8.501.80 X 8.761.80 X 9.001.80 X 9.501.80 X 10.001.80 X 10.601.80 X 11.201.80 X 11.801.80 X 12.501.80 X 13.201.80 X 14.001.80 X 15.001.80 X 16.001.80 X 17.00
1.83 X 8.92 -9041.83 X 10.52 -905
1.90 X 2.401.90 X 2.601.90 X 2.80 P31.90 X 3.40
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
1.78 X 19.051.78 X 19.151.78 X 20.35 -0191.78 X 21.471.78 X 21.95 -0201.78 X 23.52 -0211.78 X 25.12 -0221.78 X 26.70 -0231.78 X 28.30 -0241.78 X 29.87 -0251.78 X 31.47 -0261.78 X 33.05 -0271.78 X 34.65 -0281.78 X 36.001.78 X 36.27 BS5171.78 X 37.82 -0291.78 X 39.45 BS5191.78 X 41.00 -0301.78 X 44.17 -0311.78 X 45.841.78 X 47.35 -0321.78 X 50.52 -0331.78 X 53.70 -0341.78 X 56.87 -0351.78 X 60.05 -0361.78 X 63.22 -0371.78 X 66.40 -0381.78 X 69.57 -0391.78 X 72.75 -0401.78 X 75.92 -0411.78 X 79.00 BS5321.78 X 82.27 -0421.78 X 85.34 BS5341.78 X 88.62 -0431.78 X 91.70 BS5361.78 X 94.97 -0441.78 X 98.05 BS5381.78 X 101.32 -0451.78 X 104.40 BS5401.78 X 107.67 -0461.78 X 110.74 BS5421.78 X 114.02 -0471.78 X 117.10 BS5441.78 X 120.37 -0481.78 X 123.44 BS5461.78 X 126.72 -0491.78 X 129.40 BS5481.78 X 133.07 -0501.78 X 135.76 BS5501.78 X 138.94 BS5511.78 X 142.11 BS5521.78 X 145.29 BS5531.78 X 148.46 BS554
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
1.60 X 8.101.60 X 9.101.60 X 10.101.60 X 11.101.60 X 12.101.60 X 13.101.60 X 14.101.60 X 15.101.60 X 16.101.60 X 17.101.60 X 18.101.60 X 19.101.60 X 20.301.60 X 21.101.60 X 22.101.60 X 25.101.60 X 27.101.60 X 29.101.60 X 32.101.60 X 35.101.60 X 37.101.60 X 51.101.60 X 86.001.60 X 96.601.60 X 115.00
1.63 X 6.07 -9021.63 X 7.65 -903
1.78 X 1.78 -0041.78 X 2.57 -0051.78 X 2.90 -0061.78 X 3.17 BS8011.78 X 3.68 -0071.78 X 4.47 -0081.78 X 4.76 BS8021.78 X 5.28 -0091.78 X 6.07 -0101.78 X 6.35 BS8031.78 X 6.75 BS6101.78 X 7.65 -0111.78 X 7.94 BS8041.78 X 8.73 BS6111.78 X 9.25 -0121.78 X 9.521.78 X 10.82 -0131.78 X 11.11 BS8061.78 X 11.911.78 X 12.42 -0141.78 X 14.00 -0151.78 X 15.60 -0161.78 X 17.17 -0171.78 X 18.77 -018
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:51 PM Page 19
20
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
1.90 X 3.701.90 X 3.80 P41.90 X 4.201.90 X 4.80 P51.90 X 4.901.90 X 5.701.90 X 5.80 P61.90 X 6.401.90 X 6.80 P71.90 X 7.201.90 X 7.80 P81.90 X 8.001.90 X 8.80 P91.90 X 8.901.90 X 9.80 P10
1.92 X 67.10
1.98 X 11.89 -906
2.00 X 2.002.00 X 2.502.00 X 2.602.00 X 3.002.00 X 3.502.00 X 4.002.00 X 4.502.00 X 4.602.00 X 5.002.00 X 5.502.00 X 6.002.00 X 6.502.00 X 7.002.00 X 7.502.00 X 8.002.00 X 8.502.00 X 9.002.00 X 9.502.00 X 10.002.00 X 10.502.00 X 11.002.00 X 11.502.00 X 12.002.00 X 12.502.00 X 13.002.00 X 13.502.00 X 14.002.00 X 14.502.00 X 15.002.00 X 15.502.00 X 16.002.00 X 16.502.00 X 17.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
2.00 X 82.002.00 X 83.002.00 X 84.002.00 X 84.50 S852.00 X 85.002.00 X 86.002.00 X 87.002.00 X 88.002.00 X 89.002.00 X 89.50 S902.00 X 90.002.00 X 91.002.00 X 92.002.00 X 93.002.00 X 94.002.00 X 94.50 S952.00 X 95.002.00 X 96.002.00 X 97.002.00 X 98.002.00 X 99.002.00 X 99.50 S1002.00 X 100.002.00 X 102.002.00 X 104.50 S1052.00 X 105.002.00 X 109.002.00 X 109.50 S1102.00 X 110.002.00 X 111.50 S1122.00 X 114.50 S1152.00 X 115.002.00 X 119.50 S1202.00 X 120.002.00 X 124.50 S1252.00 X 125.602.00 X 129.50 S1302.00 X 130.002.00 X 131.50 S1322.00 X 134.50 S1352.00 X 139.50 S1402.00 X 140.002.00 X 144.50 S1452.00 X 149.50 S1502.00 X 165.002.00 X 180.002.00 X 194.00
2.08 X 13.46 -907
2.18 X 12.40
2.20 X 6.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
2.00 X 44.002.00 X 44.50 S452.00 X 45.002.00 X 45.50 S462.00 X 46.002.00 X 47.002.00 X 47.50 S482.00 X 48.002.00 X 49.002.00 X 49.50 S502.00 X 50.002.00 X 51.002.00 X 52.002.00 X 52.50 S532.00 X 53.002.00 X 54.002.00 X 54.50 S552.00 X 55.002.00 X 55.50 S562.00 X 56.002.00 X 57.002.00 X 58.002.00 X 59.002.00 X 59.50 S602.00 X 60.002.00 X 61.002.00 X 62.002.00 X 62.50 S632.00 X 63.002.00 X 64.002.00 X 64.50 S652.00 X 65.002.00 X 66.002.00 X 66.50 S672.00 X 67.002.00 X 68.002.00 X 69.002.00 X 69.50 S702.00 X 70.002.00 X 70.50 S712.00 X 71.002.00 X 72.002.00 X 73.002.00 X 74.002.00 X 74.50 S752.00 X 75.002.00 X 76.002.00 X 77.002.00 X 78.002.00 X 79.002.00 X 79.50 S802.00 X 80.002.00 X 81.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
2.00 X 17.502.00 X 18.002.00 X 18.502.00 X 19.002.00 X 19.502.00 X 20.002.00 X 20.502.00 X 21.002.00 X 21.502.00 X 21.90 S22.42.00 X 22.002.00 X 22.502.00 X 23.002.00 X 23.50 S242.00 X 24.002.00 X 24.50 S252.00 X 25.002.00 X 25.50 S262.00 X 26.002.00 X 26.502.00 X 27.002.00 X 27.50 S282.00 X 28.002.00 X 28.50 S292.00 X 29.002.00 X 29.50 S302.00 X 30.002.00 X 30.502.00 X 31.00 S31.52.00 X 31.50 S322.00 X 32.002.00 X 32.502.00 X 33.002.00 X 33.50 S342.00 X 34.002.00 X 34.50 S352.00 X 35.00 S35.52.00 X 35.50 S362.00 X 36.002.00 X 36.502.00 X 37.002.00 X 37.50 S382.00 X 38.002.00 X 38.50 S392.00 X 39.002.00 X 39.50 S402.00 X 40.002.00 X 41.002.00 X 41.50 S422.00 X 42.002.00 X 42.50 S432.00 X 43.002.00 X 43.50 S44
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:51 PM Page 20
21
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
2.20 X 9.002.20 X 10.002.20 X 18.00
2.21 X 16.36 -908
2.40 X 3.302.40 X 3.602.40 X 4.302.40 X 4.602.40 X 5.302.40 X 5.502.40 X 5.602.40 X 6.302.40 X 6.602.40 X 7.302.40 X 7.502.40 X 7.602.40 X 8.002.40 X 8.302.40 X 8.602.40 X 9.302.40 X 9.602.40 X 9.80 P10A2.40 X 10.302.40 X 10.502.40 X 10.602.40 X 10.80 P112.40 X 11.00 P11.22.40 X 11.302.40 X 11.502.40 X 11.602.40 X 11.80 P122.40 X 12.30 P12.52.40 X 12.602.40 X 13.302.40 X 13.502.40 X 13.602.40 X 13.80 P142.40 X 14.302.40 X 14.502.40 X 14.602.40 X 14.80 P152.40 X 15.302.40 X 15.502.40 X 15.602.40 X 15.80 P162.40 X 15.902.40 X 16.302.40 X 16.602.40 X 17.302.40 X 17.502.40 X 17.60
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
2.50 X 31.002.50 X 31.502.50 X 32.002.50 X 32.502.50 X 33.002.50 X 33.502.50 X 34.002.50 X 34.502.50 X 35.002.50 X 35.502.50 X 36.002.50 X 36.502.50 X 37.002.50 X 37.502.50 X 38.002.50 X 38.502.50 X 39.002.50 X 39.502.50 X 40.002.50 X 41.002.50 X 42.002.50 X 43.002.50 X 44.002.50 X 45.002.50 X 46.002.50 X 47.002.50 X 48.002.50 X 49.002.50 X 50.002.50 X 51.002.50 X 52.002.50 X 53.002.50 X 54.002.50 X 55.002.50 X 56.002.50 X 57.002.50 X 58.002.50 X 59.002.50 X 60.002.50 X 61.002.50 X 62.002.50 X 63.002.50 X 64.002.50 X 65.002.50 X 66.002.50 X 67.002.50 X 68.002.50 X 69.002.50 X 70.002.50 X 71.002.50 X 72.002.50 X 73.002.50 X 74.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
2.50 X 4.602.50 X 5.002.50 X 5.502.50 X 6.002.50 X 6.502.50 X 7.002.50 X 7.502.50 X 8.002.50 X 8.502.50 X 9.002.50 X 9.502.50 X 10.002.50 X 10.502.50 X 11.002.50 X 11.502.50 X 12.002.50 X 12.502.50 X 13.002.50 X 13.502.50 X 14.002.50 X 14.502.50 X 15.002.50 X 15.502.50 X 16.002.50 X 16.502.50 X 17.002.50 X 17.502.50 X 18.002.50 X 18.502.50 X 19.002.50 X 19.502.50 X 20.002.50 X 20.502.50 X 21.002.50 X 21.502.50 X 22.002.50 X 22.502.50 X 23.002.50 X 23.502.50 X 24.002.50 X 24.502.50 X 25.002.50 X 25.502.50 X 26.002.50 X 26.502.50 X 27.002.50 X 27.502.50 X 28.002.50 X 28.502.50 X 29.002.50 X 29.502.50 X 30.002.50 X 30.50
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
2.40 X 17.80 P182.40 X 18.302.40 X 18.602.40 X 19.302.40 X 19.602.40 X 19.80 P202.40 X 20.302.40 X 20.502.40 X 20.80 P212.40 X 21.302.40 X 21.502.40 X 21.602.40 X 21.80 P222.40 X 22.302.40 X 22.602.40 X 23.302.40 X 23.502.40 X 23.602.40 X 24.302.40 X 24.502.40 X 24.602.40 X 25.002.40 X 25.302.40 X 25.602.40 X 27.302.40 X 27.502.40 X 27.602.40 X 29.602.40 X 30.302.40 X 31.602.40 X 33.302.40 X 34.602.40 X 36.502.40 X 37.602.40 X 39.602.40 X 41.602.40 X 44.602.40 X 47.602.40 X 49.602.40 X 51.602.40 X 54.602.40 X 57.602.40 X 59.602.40 X 61.602.40 X 64.602.40 X 67.602.40 X 69.602.40 X 161.60
2.46 X 17.93 -9092.46 X 19.18 -910
2.50 X 4.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:51 PM Page 21
22
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
2.50 X 75.002.50 X 76.002.50 X 77.002.50 X 78.002.50 X 79.002.50 X 80.002.50 X 81.002.50 X 82.002.50 X 83.002.50 X 84.002.50 X 85.002.50 X 86.002.50 X 87.002.50 X 88.002.50 X 89.002.50 X 90.002.50 X 91.002.50 X 92.002.50 X 93.002.50 X 94.002.50 X 95.002.50 X 96.002.50 X 97.002.50 X 98.002.50 X 99.002.50 X 100.002.50 X 101.002.50 X 102.002.50 X 103.002.50 X 104.002.50 X 105.002.50 X 106.002.50 X 107.002.50 X 108.002.50 X 109.002.50 X 110.002.50 X 111.002.50 X 112.002.50 X 113.002.50 X 114.002.50 X 115.002.50 X 116.002.50 X 117.002.50 X 118.002.50 X 119.002.50 X 120.002.50 X 121.002.50 X 122.002.50 X 123.002.50 X 124.002.50 X 125.002.50 X 126.002.50 X 127.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
2.62 X 164.77 -1652.62 X 171.12 -1662.62 X 177.47 -1672.62 X 183.82 -1682.62 X 190.17 -1692.62 X 196.52 -1702.62 X 202.87 -1712.62 X 209.22 -1722.62 X 215.57 -1732.62 X 221.92 -1742.62 X 228.27 -1752.62 X 234.62 -1762.62 X 240.97 -1772.62 X 247.32 -178
2.65 X 14.002.65 X 15.002.65 X 16.002.65 X 17.002.65 X 18.002.65 X 19.002.65 X 20.002.65 X 21.202.65 X 22.402.65 X 23.602.65 X 25.002.65 X 25.802.65 X 26.502.65 X 28.002.65 X 30.002.65 X 31.502.65 X 32.502.65 X 33.502.65 X 34.502.65 X 35.502.65 X 36.502.65 X 37.502.65 X 38.70
2.70 X 8.352.70 X 8.902.70 X 10.502.70 X 12.102.70 X 13.602.70 X 15.102.70 X 16.902.70 X 18.402.70 X 18.602.70 X 27.302.70 X 28.402.70 X 117.00
2.92 X 9.53
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
2.62 X 22.23 BS8132.62 X 23.47 -1192.62 X 23.81 BS8142.62 X 25.07 -1202.62 X 26.64 -1212.62 X 28.24 -1222.62 X 29.82 -1232.62 X 31.42 -1242.62 X 32.99 -1252.62 X 34.59 -1262.62 X 36.17 -1272.62 X 37.77 -1282.62 X 39.34 -1292.62 X 40.94 -1302.62 X 42.52 -1312.62 X 44.12 -1322.62 X 45.69 -1332.62 X 47.29 -1342.62 X 48.90 -1352.62 X 50.47 -1362.62 X 52.07 -1372.62 X 53.64 -1382.62 X 55.25 -1392.62 X 56.82 -1402.62 X 58.42 -1412.62 X 59.99 -1422.62 X 61.60 -1432.62 X 63.17 -1442.62 X 64.77 -1452.62 X 66.34 -1462.62 X 67.95 -1472.62 X 69.52 -1482.62 X 71.12 -1492.62 X 72.69 -1502.62 X 74.30 BS6402.62 X 75.87 -1512.62 X 77.50 BS6412.62 X 80.60 BS6422.62 X 82.22 -1522.62 X 83.80 BS6432.62 X 88.57 -1532.62 X 92.752.62 X 94.92 -1542.62 X 101.27 -1552.62 X 107.62 -1562.62 X 113.97 -1572.62 X 120.32 -1582.62 X 126.67 -1592.62 X 133.02 -1602.62 X 139.37 -1612.62 X 145.72 -1622.62 X 152.07 -1632.62 X 158.42 -164
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
2.50 X 128.002.50 X 129.002.50 X 130.002.50 X 131.002.50 X 132.002.50 X 133.002.50 X 134.002.50 X 135.002.50 X 136.002.50 X 137.002.50 X 138.002.50 X 139.002.50 X 140.002.50 X 141.002.50 X 142.002.50 X 143.002.50 X 144.002.50 X 145.002.50 X 146.002.50 X 147.002.50 X 148.002.50 X 149.002.50 X 150.00
2.55 X 29.10
2.62 X 1.24 -1022.62 X 2.06 -1032.62 X 2.84 -1042.62 X 3.63 -1052.62 X 4.42 -1062.62 X 5.23 -1072.62 X 6.02 -1082.62 X 7.59 -1092.62 X 9.132.62 X 9.19 -1102.62 X 9.90 BS6132.62 X 10.77 -1112.62 X 11.91 BS6142.62 X 12.37 -1122.62 X 12.70 BS8072.62 X 13.10 BS6152.62 X 13.94 -1132.62 X 15.08 BS6162.62 X 15.54 -1142.62 X 15.88 BS8092.62 X 17.12 -1152.62 X 17.46 BS8102.62 X 17.86 BS6172.62 X 18.72 -1162.62 X 20.30 -1172.62 X 20.64 BS8122.62 X 21.89 -118
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:51 PM Page 22
23
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
2.95 X 21.92 -9112.95 X 23.47 -9122.95 X 25.04 -9132.95 X 26.59 -9142.95 X 29.74 -9162.95 X 34.42 -918
3.00 X 3.003.00 X 3.503.00 X 4.003.00 X 4.503.00 X 5.003.00 X 5.503.00 X 6.003.00 X 6.503.00 X 7.003.00 X 7.503.00 X 8.003.00 X 8.503.00 X 9.003.00 X 9.503.00 X 10.003.00 X 10.503.00 X 11.003.00 X 11.503.00 X 12.003.00 X 12.503.00 X 13.003.00 X 13.503.00 X 14.003.00 X 14.503.00 X 15.003.00 X 15.503.00 X 16.003.00 X 16.503.00 X 17.003.00 X 17.503.00 X 18.003.00 X 18.203.00 X 18.503.00 X 19.003.00 X 19.203.00 X 19.503.00 X 20.003.00 X 20.503.00 X 21.003.00 X 21.503.00 X 22.003.00 X 22.203.00 X 22.503.00 X 23.003.00 X 23.503.00 X 24.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.00 X 83.003.00 X 84.003.00 X 84.503.00 X 85.003.00 X 86.003.00 X 87.003.00 X 88.003.00 X 89.003.00 X 89.503.00 X 90.003.00 X 91.003.00 X 92.003.00 X 93.003.00 X 94.003.00 X 94.503.00 X 95.003.00 X 96.003.00 X 97.003.00 X 98.003.00 X 99.003.00 X 99.503.00 X 100.003.00 X 101.003.00 X 102.003.00 X 103.003.00 X 104.003.00 X 104.503.00 X 105.003.00 X 106.003.00 X 107.003.00 X 108.003.00 X 109.003.00 X 109.503.00 X 110.003.00 X 111.003.00 X 112.003.00 X 113.003.00 X 114.003.00 X 114.503.00 X 115.003.00 X 116.003.00 X 117.003.00 X 118.003.00 X 119.003.00 X 119.503.00 X 120.003.00 X 121.003.00 X 122.003.00 X 123.003.00 X 124.003.00 X 124.503.00 X 125.003.00 X 126.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.00 X 44.203.00 X 44.503.00 X 45.003.00 X 46.003.00 X 47.003.00 X 48.003.00 X 49.003.00 X 49.503.00 X 50.003.00 X 50.503.00 X 51.003.00 X 52.003.00 X 53.003.00 X 53.09 -9283.00 X 54.003.00 X 54.203.00 X 54.503.00 X 55.003.00 X 56.003.00 X 56.203.00 X 57.003.00 X 58.003.00 X 59.003.00 X 59.36 -9323.00 X 59.503.00 X 60.003.00 X 61.003.00 X 62.003.00 X 62.203.00 X 63.003.00 X 64.003.00 X 64.503.00 X 65.003.00 X 66.003.00 X 67.003.00 X 68.003.00 X 69.003.00 X 69.503.00 X 70.003.00 X 71.003.00 X 72.003.00 X 73.003.00 X 74.003.00 X 74.503.00 X 75.003.00 X 76.003.00 X 77.003.00 X 78.003.00 X 79.003.00 X 79.503.00 X 80.003.00 X 81.003.00 X 82.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.00 X 24.203.00 X 24.503.00 X 24.603.00 X 25.003.00 X 25.203.00 X 25.503.00 X 26.003.00 X 26.203.00 X 26.503.00 X 27.003.00 X 27.503.00 X 28.003.00 X 28.503.00 X 29.003.00 X 29.203.00 X 29.503.00 X 30.003.00 X 30.203.00 X 30.503.00 X 31.003.00 X 31.503.00 X 32.003.00 X 32.203.00 X 32.503.00 X 33.003.00 X 33.503.00 X 34.003.00 X 34.203.00 X 34.503.00 X 35.003.00 X 35.503.00 X 36.003.00 X 36.203.00 X 36.503.00 X 37.003.00 X 37.203.00 X 37.47 -9203.00 X 37.503.00 X 38.003.00 X 38.503.00 X 39.003.00 X 39.203.00 X 39.503.00 X 40.003.00 X 40.203.00 X 41.003.00 X 41.503.00 X 42.003.00 X 42.203.00 X 42.503.00 X 43.003.00 X 43.69 -9243.00 X 44.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:51 PM Page 23
24
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
3.00 X 126.503.00 X 127.003.00 X 128.003.00 X 129.003.00 X 129.503.00 X 130.003.00 X 131.003.00 X 132.003.00 X 133.003.00 X 134.003.00 X 134.503.00 X 135.003.00 X 136.003.00 X 137.003.00 X 138.003.00 X 139.003.00 X 139.503.00 X 140.003.00 X 141.003.00 X 142.003.00 X 143.003.00 X 144.003.00 X 144.503.00 X 145.003.00 X 146.003.00 X 147.003.00 X 148.003.00 X 149.003.00 X 149.503.00 X 150.003.00 X 151.003.00 X 152.003.00 X 153.003.00 X 154.003.00 X 154.503.00 X 155.003.00 X 156.003.00 X 157.003.00 X 158.003.00 X 159.003.00 X 159.503.00 X 160.003.00 X 161.003.00 X 162.003.00 X 163.003.00 X 164.003.00 X 164.503.00 X 165.003.00 X 166.003.00 X 167.003.00 X 168.003.00 X 169.003.00 X 169.50
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.00 X 518.50
3.10 X 24.40 G253.10 X 29.40 G303.10 X 34.40 G353.10 X 39.40 G403.10 X 44.40 G453.10 X 49.40 G503.10 X 54.40 G553.10 X 59.40 G603.10 X 64.40 G653.10 X 69.40 G703.10 X 74.40 G753.10 X 79.40 G803.10 X 84.40 G853.10 X 89.40 G903.10 X 94.40 G953.10 X 99.40 G1003.10 X 104.40 G1053.10 X 109.40 G1103.10 X 114.40 G1153.10 X 119.40 G1203.10 X 124.40 G1253.10 X 129.40 G1303.10 X 134.40 G1353.10 X 139.40 G1403.10 X 144.40 G145
3.20 X 174.003.20 X 219.503.20 X 227.00
3.50 X 5.003.50 X 8.003.50 X 9.003.50 X 9.203.50 X 10.003.50 X 11.003.50 X 12.003.50 X 13.003.50 X 14.003.50 X 15.003.50 X 16.003.50 X 17.003.50 X 17.503.50 X 18.003.50 X 19.003.50 X 20.003.50 X 21.003.50 X 21.70 P22A3.50 X 22.003.50 X 22.10 P22.43.50 X 23.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.00 X 214.003.00 X 215.003.00 X 216.003.00 X 217.003.00 X 218.003.00 X 219.003.00 X 219.503.00 X 220.003.00 X 221.003.00 X 222.003.00 X 223.003.00 X 224.003.00 X 225.003.00 X 226.003.00 X 227.003.00 X 228.003.00 X 229.003.00 X 229.503.00 X 230.003.00 X 231.003.00 X 232.003.00 X 233.003.00 X 234.003.00 X 235.003.00 X 236.003.00 X 237.003.00 X 238.003.00 X 239.003.00 X 239.503.00 X 240.003.00 X 241.003.00 X 242.003.00 X 243.003.00 X 244.003.00 X 245.003.00 X 246.003.00 X 247.003.00 X 248.003.00 X 249.003.00 X 249.503.00 X 250.003.00 X 255.003.00 X 259.303.00 X 260.003.00 X 264.003.00 X 270.003.00 X 280.003.00 X 300.003.00 X 315.003.00 X 320.003.00 X 350.003.00 X 440.003.00 X 505.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.00 X 170.003.00 X 171.003.00 X 172.003.00 X 173.003.00 X 174.003.00 X 174.503.00 X 175.003.00 X 176.003.00 X 177.003.00 X 178.003.00 X 179.003.00 X 179.503.00 X 180.003.00 X 181.003.00 X 182.003.00 X 183.003.00 X 183.503.00 X 184.003.00 X 184.503.00 X 185.003.00 X 186.003.00 X 187.003.00 X 188.003.00 X 189.003.00 X 189.503.00 X 190.003.00 X 191.003.00 X 192.003.00 X 193.003.00 X 194.003.00 X 194.503.00 X 195.003.00 X 196.003.00 X 197.003.00 X 198.003.00 X 199.003.00 X 199.503.00 X 200.003.00 X 201.003.00 X 202.003.00 X 203.003.00 X 204.003.00 X 204.503.00 X 205.003.00 X 206.003.00 X 207.003.00 X 208.003.00 X 209.003.00 X 209.503.00 X 210.003.00 X 211.003.00 X 212.003.00 X 213.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:51 PM Page 24
25
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
3.50 X 23.70 P243.50 X 24.003.50 X 24.70 P253.50 X 25.003.50 X 25.20 P25.53.50 X 25.70 P263.50 X 26.003.50 X 27.003.50 X 27.70 P283.50 X 28.003.50 X 28.70 P293.50 X 29.003.50 X 29.20 P29.53.50 X 29.70 P303.50 X 30.003.50 X 30.503.50 X 30.70 P313.50 X 31.003.50 X 31.20 P31.53.50 X 31.70 P323.50 X 32.003.50 X 33.003.50 X 33.70 P343.50 X 34.003.50 X 34.70 P353.50 X 35.003.50 X 35.20 P35.53.50 X 35.70 P363.50 X 36.003.50 X 37.003.50 X 37.70 P383.50 X 38.003.50 X 38.70 P393.50 X 39.003.50 X 39.70 P403.50 X 40.003.50 X 40.70 P413.50 X 41.003.50 X 41.70 P423.50 X 42.003.50 X 43.003.50 X 43.70 P443.50 X 44.003.50 X 44.70 P453.50 X 45.003.50 X 45.70 P463.50 X 46.003.50 X 47.003.50 X 47.70 P483.50 X 48.003.50 X 48.70 P493.50 X 49.003.50 X 49.70 P50
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.50 X 156.003.50 X 157.003.50 X 158.003.50 X 159.003.50 X 160.003.50 X 161.003.50 X 162.003.50 X 163.003.50 X 164.003.50 X 165.003.50 X 166.003.50 X 167.003.50 X 168.003.50 X 169.003.50 X 170.003.50 X 171.003.50 X 172.003.50 X 173.003.50 X 174.003.50 X 175.003.50 X 176.003.50 X 177.003.50 X 178.003.50 X 179.003.50 X 180.003.50 X 181.003.50 X 182.003.50 X 183.003.50 X 184.003.50 X 185.003.50 X 186.003.50 X 187.003.50 X 188.003.50 X 189.003.50 X 190.003.50 X 191.003.50 X 192.003.50 X 193.003.50 X 194.003.50 X 195.003.50 X 196.003.50 X 197.003.50 X 198.003.50 X 199.003.50 X 200.003.50 X 201.003.50 X 202.003.50 X 203.003.50 X 204.003.50 X 205.003.50 X 206.003.50 X 207.003.50 X 208.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.50 X 103.003.50 X 104.003.50 X 105.003.50 X 106.003.50 X 107.003.50 X 108.003.50 X 109.003.50 X 110.003.50 X 111.003.50 X 112.003.50 X 113.003.50 X 114.003.50 X 115.003.50 X 116.003.50 X 117.003.50 X 118.003.50 X 119.003.50 X 120.003.50 X 121.003.50 X 122.003.50 X 123.003.50 X 124.003.50 X 125.003.50 X 126.003.50 X 127.003.50 X 128.003.50 X 129.003.50 X 130.003.50 X 131.003.50 X 132.003.50 X 133.003.50 X 134.003.50 X 135.003.50 X 136.003.50 X 137.003.50 X 138.003.50 X 139.003.50 X 140.003.50 X 141.003.50 X 142.003.50 X 143.003.50 X 144.003.50 X 145.003.50 X 146.003.50 X 147.003.50 X 148.003.50 X 149.003.50 X 150.003.50 X 151.003.50 X 152.003.50 X 153.003.50 X 154.003.50 X 155.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.50 X 50.003.50 X 51.003.50 X 52.003.50 X 53.003.50 X 54.003.50 X 55.003.50 X 56.003.50 X 57.003.50 X 58.003.50 X 59.003.50 X 60.003.50 X 61.003.50 X 62.003.50 X 63.003.50 X 64.003.50 X 65.003.50 X 66.003.50 X 67.003.50 X 68.003.50 X 69.003.50 X 70.003.50 X 71.003.50 X 72.003.50 X 73.003.50 X 74.003.50 X 75.003.50 X 76.003.50 X 77.003.50 X 78.003.50 X 79.003.50 X 80.003.50 X 81.003.50 X 82.003.50 X 83.003.50 X 84.003.50 X 85.003.50 X 86.003.50 X 87.003.50 X 88.003.50 X 89.003.50 X 90.003.50 X 91.003.50 X 92.003.50 X 93.003.50 X 94.003.50 X 95.003.50 X 96.003.50 X 97.003.50 X 98.003.50 X 99.003.50 X 100.003.50 X 101.003.50 X 102.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:51 PM Page 25
26
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
3.50 X 209.003.50 X 210.003.50 X 211.003.50 X 212.003.50 X 213.003.50 X 214.003.50 X 215.003.50 X 216.003.50 X 217.003.50 X 218.003.50 X 219.003.50 X 220.003.50 X 221.003.50 X 222.003.50 X 223.003.50 X 224.003.50 X 225.003.50 X 226.003.50 X 227.003.50 X 228.003.50 X 229.003.50 X 230.003.50 X 231.003.50 X 232.003.50 X 233.003.50 X 234.003.50 X 235.003.50 X 236.003.50 X 237.003.50 X 238.003.50 X 239.003.50 X 240.003.50 X 241.003.50 X 242.003.50 X 243.003.50 X 244.003.50 X 245.003.50 X 246.003.50 X 247.003.50 X 248.003.50 X 249.003.50 X 250.003.50 X 251.003.50 X 252.003.50 X 253.003.50 X 254.003.50 X 255.003.50 X 256.003.50 X 257.003.50 X 258.003.50 X 259.003.50 X 260.003.50 X 261.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.50 X 368.003.50 X 369.003.50 X 370.003.50 X 371.003.50 X 372.003.50 X 373.003.50 X 374.003.50 X 375.003.50 X 376.003.50 X 377.003.50 X 378.003.50 X 379.003.50 X 380.003.50 X 381.003.50 X 382.003.50 X 383.003.50 X 384.003.50 X 385.003.50 X 386.003.50 X 387.003.50 X 388.003.50 X 389.003.50 X 390.003.50 X 391.003.50 X 392.003.50 X 393.003.50 X 394.003.50 X 395.003.50 X 396.003.50 X 397.003.50 X 398.003.50 X 399.003.50 X 400.003.50 X 401.003.50 X 402.003.50 X 403.003.50 X 404.003.50 X 405.003.50 X 406.003.50 X 407.003.50 X 408.003.50 X 409.003.50 X 410.003.50 X 411.003.50 X 412.003.50 X 413.003.50 X 414.003.50 X 415.003.50 X 416.003.50 X 417.003.50 X 418.003.50 X 419.003.50 X 420.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.50 X 315.003.50 X 316.003.50 X 317.003.50 X 318.003.50 X 319.003.50 X 320.003.50 X 321.003.50 X 322.003.50 X 323.003.50 X 324.003.50 X 325.003.50 X 326.003.50 X 327.003.50 X 328.003.50 X 329.003.50 X 330.003.50 X 331.003.50 X 332.003.50 X 333.003.50 X 334.003.50 X 335.003.50 X 336.003.50 X 337.003.50 X 338.003.50 X 339.003.50 X 340.003.50 X 341.003.50 X 342.003.50 X 343.003.50 X 344.003.50 X 345.003.50 X 346.003.50 X 347.003.50 X 348.003.50 X 349.003.50 X 350.003.50 X 351.003.50 X 352.003.50 X 353.003.50 X 354.003.50 X 355.003.50 X 356.003.50 X 357.003.50 X 358.003.50 X 359.003.50 X 360.003.50 X 361.003.50 X 362.003.50 X 363.003.50 X 364.003.50 X 365.003.50 X 366.003.50 X 367.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.50 X 262.003.50 X 263.003.50 X 264.003.50 X 265.003.50 X 266.003.50 X 267.003.50 X 268.003.50 X 269.003.50 X 270.003.50 X 271.003.50 X 272.003.50 X 273.003.50 X 274.003.50 X 275.003.50 X 276.003.50 X 277.003.50 X 278.003.50 X 279.003.50 X 280.003.50 X 281.003.50 X 282.003.50 X 283.003.50 X 284.003.50 X 285.003.50 X 286.003.50 X 287.003.50 X 288.003.50 X 289.003.50 X 290.003.50 X 291.003.50 X 292.003.50 X 293.003.50 X 294.003.50 X 295.003.50 X 296.003.50 X 297.003.50 X 298.003.50 X 299.003.50 X 300.003.50 X 301.003.50 X 302.003.50 X 303.003.50 X 304.003.50 X 305.003.50 X 306.003.50 X 307.003.50 X 308.003.50 X 309.003.50 X 310.003.50 X 311.003.50 X 312.003.50 X 313.003.50 X 314.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:51 PM Page 26
27
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
3.50 X 421.003.50 X 422.003.50 X 423.003.50 X 424.003.50 X 425.003.50 X 426.003.50 X 427.003.50 X 428.003.50 X 429.003.50 X 430.003.50 X 431.003.50 X 432.003.50 X 433.003.50 X 434.003.50 X 435.003.50 X 436.003.50 X 437.003.50 X 438.003.50 X 439.003.50 X 440.00
3.53 X 4.34 -2013.53 X 5.94 -2023.53 X 7.52 -2033.53 X 9.12 -2043.53 X 10.69 -2053.53 X 12.29 -2063.53 X 13.87 -2073.53 X 15.47 -2083.53 X 17.04 -2093.53 X 18.64 -2103.53 X 20.22 -2113.53 X 21.82 -2123.53 X 23.39 -2133.53 X 24.99 -2143.53 X 25.80 BS6183.53 X 26.57 -2153.53 X 28.17 -2163.53 X 29.74 -2173.53 X 31.34 -2183.53 X 32.92 -2193.53 X 34.52 -2203.53 X 36.09 -2213.53 X 37.69 -2223.53 X 39.70 BS8243.53 X 40.87 -2233.53 X 41.28 BS8253.53 X 42.86 BS8263.53 X 44.04 -2243.53 X 44.45 BS8273.53 X 46.04 BS8283.53 X 47.22 -2253.53 X 47.62 BS829
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.55 X 50.003.55 X 51.503.55 X 53.003.55 X 54.503.55 X 56.003.55 X 58.003.55 X 60.003.55 X 61.503.55 X 63.003.55 X 65.003.55 X 67.003.55 X 69.003.55 X 71.003.55 X 73.003.55 X 75.003.55 X 77.503.55 X 80.003.55 X 82.503.55 X 85.003.55 X 87.503.55 X 90.003.55 X 92.503.55 X 95.003.55 X 97.503.55 X 100.003.55 X 103.003.55 X 106.003.55 X 109.003.55 X 112.003.55 X 115.003.55 X 118.003.55 X 122.003.55 X 125.003.55 X 128.003.55 X 132.003.55 X 136.003.55 X 140.003.55 X 145.003.55 X 150.003.55 X 155.003.55 X 160.003.55 X 165.003.55 X 170.003.55 X 175.003.55 X 180.003.55 X 185.003.55 X 190.003.55 X 195.003.55 X 200.00
3.60 X 18.303.60 X 19.803.60 X 21.30
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.53 X 171.04 -2613.53 X 177.39 -2623.53 X 183.74 -2633.53 X 190.09 -2643.53 X 196.44 -2653.53 X 202.79 -2663.53 X 209.14 -2673.53 X 215.49 -2683.53 X 221.84 -2693.53 X 228.19 -2703.53 X 234.54 -2713.53 X 240.89 -2723.53 X 247.24 -2733.53 X 253.59 -2743.53 X 266.29 -2753.53 X 278.99 -2763.53 X 291.69 -2773.53 X 304.39 -2783.53 X 319.203.53 X 329.79 -2793.53 X 355.19 -2803.53 X 380.59 -2813.53 X 405.26 -2823.53 X 430.66 -2833.53 X 456.06 -284
3.55 X 18.003.55 X 19.003.55 X 20.003.55 X 21.203.55 X 22.403.55 X 23.603.55 X 25.003.55 X 25.803.55 X 26.503.55 X 28.003.55 X 30.003.55 X 31.503.55 X 32.503.55 X 33.503.55 X 34.503.55 X 35.503.55 X 36.503.55 X 37.503.55 X 38.703.55 X 40.003.55 X 41.203.55 X 42.503.55 X 43.703.55 X 45.003.55 X 46.203.55 X 47.503.55 X 48.70
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
3.53 X 49.20 BS8303.53 X 50.39 -2263.53 X 50.80 BS8313.53 X 52.40 BS8323.53 X 53.57 -2273.53 X 53.97 BS8333.53 X 55.56 BS8343.53 X 56.74 -2283.53 X 57.15 BS8353.53 X 58.74 BS8363.53 X 59.92 -2293.53 X 60.32 BS8373.53 X 61.90 BS8383.53 X 63.09 -2303.53 X 63.50 BS8393.53 X 65.10 BS8403.53 X 66.27 -2313.53 X 66.67 BS8413.53 X 68.26 BS8423.53 X 69.44 -2323.53 X 69.85 BS8433.53 X 71.44 BS8443.53 X 72.62 -2333.53 X 73.02 BS8453.53 X 74.60 BS8463.53 X 75.79 -2343.53 X 78.97 -2353.53 X 82.14 -2363.53 X 85.32 -2373.53 X 88.49 -2383.53 X 91.67 -2393.53 X 94.84 -2403.53 X 98.02 -2413.53 X 101.19 -2423.53 X 104.37 -2433.53 X 107.54 -2443.53 X 110.72 -2453.53 X 113.89 -2463.53 X 117.07 -2473.53 X 120.24 -2483.53 X 123.42 -2493.53 X 126.59 -2503.53 X 129.77 -2513.53 X 132.94 -2523.53 X 136.12 -2533.53 X 139.29 -2543.53 X 142.47 -2553.53 X 145.64 -2563.53 X 148.82 -2573.53 X 151.99 -2583.53 X 158.34 -2593.53 X 158.823.53 X 164.69 -260
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:52 PM Page 27
28
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
3.60 X 23.003.60 X 24.603.60 X 26.203.60 X 27.803.60 X 29.303.60 X 30.803.60 X 32.503.60 X 34.103.60 X 35.603.60 X 37.303.60 X 43.40
4.00 X 4.004.00 X 5.004.00 X 6.004.00 X 7.004.00 X 7.604.00 X 8.004.00 X 9.004.00 X 10.004.00 X 11.004.00 X 12.004.00 X 13.004.00 X 14.004.00 X 14.50 V154.00 X 15.004.00 X 16.004.00 X 17.004.00 X 18.004.00 X 19.004.00 X 20.004.00 X 21.004.00 X 22.004.00 X 23.004.00 X 23.50 V244.00 X 24.004.00 X 25.004.00 X 26.004.00 X 27.004.00 X 28.004.00 X 29.004.00 X 30.004.00 X 31.004.00 X 32.004.00 X 33.004.00 X 33.50 V344.00 X 34.004.00 X 35.004.00 X 36.004.00 X 37.004.00 X 38.004.00 X 39.004.00 X 39.50 V40
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
4.00 X 144.004.00 X 145.004.00 X 146.004.00 X 147.004.00 X 148.004.00 X 148.50 V1504.00 X 149.004.00 X 150.004.00 X 151.004.00 X 152.004.00 X 153.004.00 X 154.004.00 X 155.004.00 X 156.004.00 X 157.004.00 X 158.004.00 X 159.004.00 X 160.004.00 X 161.004.00 X 162.004.00 X 163.004.00 X 164.004.00 X 165.004.00 X 166.004.00 X 167.004.00 X 168.004.00 X 169.004.00 X 170.004.00 X 171.004.00 X 172.004.00 X 173.00 V1754.00 X 174.004.00 X 175.004.00 X 176.004.00 X 177.004.00 X 178.004.00 X 179.004.00 X 180.004.00 X 181.004.00 X 182.004.00 X 183.004.00 X 184.004.00 X 185.004.00 X 186.004.00 X 187.004.00 X 188.004.00 X 189.004.00 X 190.004.00 X 191.004.00 X 192.004.00 X 193.004.00 X 194.004.00 X 195.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
4.00 X 91.004.00 X 92.004.00 X 93.004.00 X 94.004.00 X 95.004.00 X 96.004.00 X 97.004.00 X 98.004.00 X 99.00 V1004.00 X 100.004.00 X 101.004.00 X 102.004.00 X 103.004.00 X 104.004.00 X 105.004.00 X 106.004.00 X 107.004.00 X 108.004.00 X 109.004.00 X 110.004.00 X 111.004.00 X 112.004.00 X 113.004.00 X 114.004.00 X 115.004.00 X 116.004.00 X 117.004.00 X 118.004.00 X 119.00 V1204.00 X 120.004.00 X 121.004.00 X 122.004.00 X 123.004.00 X 124.004.00 X 125.004.00 X 126.004.00 X 127.004.00 X 128.004.00 X 129.004.00 X 130.004.00 X 131.004.00 X 132.004.00 X 133.004.00 X 134.004.00 X 135.004.00 X 136.004.00 X 137.004.00 X 138.004.00 X 139.004.00 X 140.004.00 X 141.004.00 X 142.004.00 X 143.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
4.00 X 40.004.00 X 41.004.00 X 42.004.00 X 43.004.00 X 44.004.00 X 45.004.00 X 46.004.00 X 47.004.00 X 48.004.00 X 49.004.00 X 50.004.00 X 51.004.00 X 52.004.00 X 53.004.00 X 54.004.00 X 54.50 V554.00 X 55.004.00 X 56.004.00 X 57.004.00 X 58.004.00 X 59.004.00 X 60.004.00 X 61.004.00 X 62.004.00 X 63.004.00 X 64.004.00 X 65.004.00 X 66.004.00 X 67.004.00 X 68.004.00 X 69.00 V704.00 X 70.004.00 X 71.004.00 X 72.004.00 X 73.004.00 X 74.004.00 X 75.004.00 X 76.004.00 X 77.004.00 X 78.004.00 X 79.004.00 X 80.004.00 X 81.004.00 X 82.004.00 X 83.004.00 X 84.00 V854.00 X 85.004.00 X 86.004.00 X 86.504.00 X 87.004.00 X 88.004.00 X 89.004.00 X 90.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:52 PM Page 28
29
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
4.00 X 196.004.00 X 197.004.00 X 198.004.00 X 199.004.00 X 200.004.00 X 201.004.00 X 202.004.00 X 203.004.00 X 204.004.00 X 205.004.00 X 206.004.00 X 207.004.00 X 208.004.00 X 209.004.00 X 210.004.00 X 211.004.00 X 212.004.00 X 213.004.00 X 214.004.00 X 215.004.00 X 216.004.00 X 217.004.00 X 218.004.00 X 219.004.00 X 220.004.00 X 221.004.00 X 222.004.00 X 223.004.00 X 224.004.00 X 225.004.00 X 226.004.00 X 227.004.00 X 228.004.00 X 229.004.00 X 230.004.00 X 231.004.00 X 232.004.00 X 233.004.00 X 234.004.00 X 235.004.00 X 236.004.00 X 237.004.00 X 238.004.00 X 239.004.00 X 240.004.00 X 241.004.00 X 242.004.00 X 243.004.00 X 244.004.00 X 245.004.00 X 246.004.00 X 247.004.00 X 248.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
4.00 X 355.004.00 X 356.004.00 X 357.004.00 X 358.004.00 X 359.004.00 X 360.004.00 X 361.004.00 X 362.004.00 X 363.004.00 X 364.004.00 X 365.004.00 X 366.004.00 X 367.004.00 X 368.004.00 X 369.004.00 X 370.004.00 X 371.004.00 X 372.004.00 X 373.004.00 X 374.004.00 X 375.004.00 X 376.004.00 X 377.004.00 X 378.004.00 X 379.004.00 X 380.004.00 X 381.004.00 X 382.004.00 X 383.004.00 X 384.004.00 X 385.004.00 X 386.004.00 X 387.004.00 X 388.004.00 X 389.004.00 X 390.004.00 X 391.004.00 X 392.004.00 X 393.004.00 X 394.004.00 X 395.004.00 X 396.004.00 X 397.004.00 X 398.004.00 X 399.004.00 X 400.004.00 X 401.004.00 X 402.004.00 X 403.004.00 X 404.004.00 X 405.004.00 X 406.004.00 X 407.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
4.00 X 302.004.00 X 303.004.00 X 304.004.00 X 305.004.00 X 306.004.00 X 307.004.00 X 308.004.00 X 309.004.00 X 310.004.00 X 311.004.00 X 312.004.00 X 313.004.00 X 314.004.00 X 315.004.00 X 316.004.00 X 317.004.00 X 318.004.00 X 319.004.00 X 320.004.00 X 321.004.00 X 322.004.00 X 323.004.00 X 324.004.00 X 325.004.00 X 326.004.00 X 327.004.00 X 328.004.00 X 329.004.00 X 330.004.00 X 331.004.00 X 332.004.00 X 333.004.00 X 334.004.00 X 335.004.00 X 336.004.00 X 337.004.00 X 338.004.00 X 339.004.00 X 340.004.00 X 341.004.00 X 342.004.00 X 343.004.00 X 344.004.00 X 345.004.00 X 346.004.00 X 347.004.00 X 348.004.00 X 349.004.00 X 350.004.00 X 351.004.00 X 352.004.00 X 353.004.00 X 354.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
4.00 X 249.004.00 X 250.004.00 X 251.004.00 X 252.004.00 X 253.004.00 X 254.004.00 X 255.004.00 X 256.004.00 X 257.004.00 X 258.004.00 X 259.004.00 X 260.004.00 X 261.004.00 X 262.004.00 X 263.004.00 X 264.004.00 X 265.004.00 X 266.004.00 X 267.004.00 X 268.004.00 X 269.004.00 X 270.004.00 X 271.004.00 X 272.004.00 X 273.004.00 X 274.004.00 X 275.004.00 X 276.004.00 X 277.004.00 X 278.004.00 X 279.004.00 X 280.004.00 X 281.004.00 X 282.004.00 X 283.004.00 X 284.004.00 X 285.004.00 X 286.004.00 X 287.004.00 X 288.004.00 X 289.004.00 X 290.004.00 X 291.004.00 X 292.004.00 X 293.004.00 X 294.004.00 X 295.004.00 X 296.004.00 X 297.004.00 X 298.004.00 X 299.004.00 X 300.004.00 X 301.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:52 PM Page 29
30
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
4.00 X 408.004.00 X 409.004.00 X 410.004.00 X 411.004.00 X 412.004.00 X 413.004.00 X 414.004.00 X 415.004.00 X 416.004.00 X 417.004.00 X 418.004.00 X 419.004.00 X 420.004.00 X 421.004.00 X 422.004.00 X 423.004.00 X 424.004.00 X 425.004.00 X 426.004.00 X 427.004.00 X 428.004.00 X 429.004.00 X 430.004.00 X 431.004.00 X 432.004.00 X 433.004.00 X 434.004.00 X 435.004.00 X 436.004.00 X 437.004.00 X 438.004.00 X 439.004.00 X 440.004.00 X 441.004.00 X 442.004.00 X 443.004.00 X 444.004.00 X 445.004.00 X 446.004.00 X 447.004.00 X 448.004.00 X 449.004.00 X 450.004.00 X 451.004.00 X 452.004.00 X 453.004.00 X 454.004.00 X 455.004.00 X 456.004.00 X 457.004.00 X 458.004.00 X 459.004.00 X 460.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
4.50 X 62.004.50 X 63.004.50 X 64.004.50 X 65.004.50 X 66.004.50 X 68.004.50 X 69.004.50 X 70.004.50 X 71.004.50 X 73.004.50 X 74.004.50 X 75.004.50 X 76.004.50 X 80.004.50 X 81.004.50 X 83.004.50 X 85.004.50 X 86.004.50 X 89.004.50 X 90.004.50 X 92.004.50 X 93.504.50 X 95.004.50 X 97.504.50 X 98.004.50 X 99.504.50 X 100.004.50 X 100.504.50 X 101.004.50 X 103.504.50 X 105.004.50 X 106.004.50 X 110.004.50 X 115.004.50 X 118.004.50 X 120.004.50 X 122.004.50 X 124.004.50 X 126.004.50 X 128.004.50 X 130.004.50 X 131.504.50 X 134.504.50 X 137.004.50 X 140.004.50 X 140.504.50 X 150.004.50 X 153.004.50 X 155.004.50 X 157.004.50 X 160.004.50 X 165.004.50 X 172.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
4.50 X 15.504.50 X 16.004.50 X 17.004.50 X 18.004.50 X 19.004.50 X 20.004.50 X 21.004.50 X 21.504.50 X 22.004.50 X 22.504.50 X 23.004.50 X 24.004.50 X 24.504.50 X 25.004.50 X 26.004.50 X 27.004.50 X 27.504.50 X 28.004.50 X 28.504.50 X 29.004.50 X 29.504.50 X 30.004.50 X 31.004.50 X 31.504.50 X 32.004.50 X 33.004.50 X 34.004.50 X 34.504.50 X 35.004.50 X 35.504.50 X 36.004.50 X 37.004.50 X 37.504.50 X 38.004.50 X 39.004.50 X 40.004.50 X 40.504.50 X 41.004.50 X 42.004.50 X 43.004.50 X 44.004.50 X 45.004.50 X 46.004.50 X 47.004.50 X 48.004.50 X 49.004.50 X 50.004.50 X 51.004.50 X 53.004.50 X 56.004.50 X 57.004.50 X 60.004.50 X 61.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
4.00 X 461.004.00 X 462.004.00 X 463.004.00 X 464.004.00 X 465.004.00 X 466.004.00 X 467.004.00 X 468.004.00 X 469.004.00 X 470.004.00 X 471.004.00 X 472.004.00 X 473.004.00 X 474.004.00 X 475.004.00 X 476.004.00 X 477.004.00 X 478.004.00 X 479.004.00 X 480.004.00 X 481.004.00 X 482.004.00 X 483.004.00 X 484.004.00 X 485.004.00 X 486.004.00 X 487.004.00 X 488.004.00 X 489.004.00 X 490.004.00 X 491.004.00 X 492.004.00 X 493.004.00 X 494.004.00 X 495.004.00 X 496.004.00 X 497.004.00 X 498.004.00 X 499.004.00 X 500.00
4.20 X 139.00
4.50 X 6.004.50 X 8.004.50 X 9.004.50 X 9.504.50 X 10.004.50 X 10.504.50 X 11.004.50 X 12.004.50 X 13.004.50 X 15.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:52 PM Page 30
31
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
4.50 X 178.004.50 X 180.004.50 X 185.004.50 X 186.004.50 X 189.504.50 X 192.004.50 X 208.004.50 X 215.004.50 X 218.504.50 X 225.004.50 X 227.004.50 X 250.004.50 X 267.004.50 X 280.004.50 X 315.00
4.76 X 7.93
5.00 X 4.005.00 X 5.005.00 X 6.005.00 X 7.005.00 X 8.005.00 X 9.005.00 X 10.005.00 X 11.005.00 X 12.005.00 X 13.005.00 X 14.005.00 X 15.005.00 X 16.005.00 X 17.005.00 X 18.005.00 X 19.005.00 X 20.005.00 X 21.005.00 X 22.005.00 X 23.005.00 X 24.005.00 X 25.005.00 X 26.005.00 X 27.005.00 X 28.005.00 X 29.005.00 X 30.005.00 X 31.005.00 X 32.005.00 X 33.005.00 X 34.005.00 X 35.005.00 X 36.005.00 X 37.005.00 X 38.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
5.00 X 145.005.00 X 146.005.00 X 147.005.00 X 148.005.00 X 149.005.00 X 150.005.00 X 151.005.00 X 152.005.00 X 153.005.00 X 154.005.00 X 155.005.00 X 156.005.00 X 157.005.00 X 158.005.00 X 159.005.00 X 160.005.00 X 161.005.00 X 162.005.00 X 163.005.00 X 164.005.00 X 165.005.00 X 166.005.00 X 167.005.00 X 168.005.00 X 169.005.00 X 170.005.00 X 171.005.00 X 172.005.00 X 173.005.00 X 174.005.00 X 175.005.00 X 176.005.00 X 177.005.00 X 178.005.00 X 179.005.00 X 180.005.00 X 181.005.00 X 182.005.00 X 183.005.00 X 184.005.00 X 185.005.00 X 186.005.00 X 187.005.00 X 188.005.00 X 189.005.00 X 190.005.00 X 191.005.00 X 192.005.00 X 193.005.00 X 194.005.00 X 195.005.00 X 196.005.00 X 197.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
5.00 X 92.005.00 X 93.005.00 X 94.005.00 X 95.005.00 X 96.005.00 X 97.005.00 X 98.005.00 X 99.005.00 X 100.005.00 X 101.005.00 X 102.005.00 X 103.005.00 X 104.005.00 X 105.005.00 X 106.005.00 X 107.005.00 X 108.005.00 X 109.005.00 X 110.005.00 X 111.005.00 X 112.005.00 X 113.005.00 X 114.005.00 X 115.005.00 X 116.005.00 X 117.005.00 X 118.005.00 X 119.005.00 X 120.005.00 X 121.005.00 X 122.005.00 X 123.005.00 X 124.005.00 X 125.005.00 X 126.005.00 X 127.005.00 X 128.005.00 X 129.005.00 X 130.005.00 X 131.005.00 X 132.005.00 X 133.005.00 X 134.005.00 X 135.005.00 X 136.005.00 X 137.005.00 X 138.005.00 X 139.005.00 X 140.005.00 X 141.005.00 X 142.005.00 X 143.005.00 X 144.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
5.00 X 39.005.00 X 40.005.00 X 41.005.00 X 42.005.00 X 43.005.00 X 44.005.00 X 45.005.00 X 46.005.00 X 47.005.00 X 48.005.00 X 49.005.00 X 50.005.00 X 51.005.00 X 52.005.00 X 53.005.00 X 54.005.00 X 55.005.00 X 56.005.00 X 57.005.00 X 58.005.00 X 59.005.00 X 60.005.00 X 61.005.00 X 62.005.00 X 63.005.00 X 64.005.00 X 65.005.00 X 66.005.00 X 67.005.00 X 68.005.00 X 69.005.00 X 70.005.00 X 71.005.00 X 72.005.00 X 73.005.00 X 74.005.00 X 75.005.00 X 76.005.00 X 77.005.00 X 78.005.00 X 79.005.00 X 80.005.00 X 81.005.00 X 82.005.00 X 83.005.00 X 84.005.00 X 85.005.00 X 86.005.00 X 87.005.00 X 88.005.00 X 89.005.00 X 90.005.00 X 91.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:52 PM Page 31
32
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
5.00 X 198.005.00 X 199.005.00 X 200.005.00 X 201.005.00 X 202.005.00 X 203.005.00 X 204.005.00 X 205.005.00 X 206.005.00 X 207.005.00 X 208.005.00 X 209.005.00 X 210.005.00 X 211.005.00 X 212.005.00 X 213.005.00 X 214.005.00 X 215.005.00 X 216.005.00 X 217.005.00 X 218.005.00 X 219.005.00 X 220.005.00 X 221.005.00 X 222.005.00 X 223.005.00 X 224.005.00 X 225.005.00 X 226.005.00 X 227.005.00 X 228.005.00 X 229.005.00 X 230.005.00 X 231.005.00 X 232.005.00 X 233.005.00 X 234.005.00 X 235.005.00 X 236.005.00 X 237.005.00 X 238.005.00 X 239.005.00 X 240.005.00 X 241.005.00 X 242.005.00 X 243.005.00 X 244.005.00 X 245.005.00 X 246.005.00 X 247.005.00 X 248.005.00 X 249.005.00 X 250.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
5.00 X 357.005.00 X 358.005.00 X 359.005.00 X 360.005.00 X 361.005.00 X 362.005.00 X 363.005.00 X 364.005.00 X 365.005.00 X 366.005.00 X 367.005.00 X 368.005.00 X 369.005.00 X 370.005.00 X 371.005.00 X 372.005.00 X 373.005.00 X 374.005.00 X 375.005.00 X 376.005.00 X 377.005.00 X 378.005.00 X 379.005.00 X 380.005.00 X 381.005.00 X 382.005.00 X 383.005.00 X 384.005.00 X 385.005.00 X 386.005.00 X 387.005.00 X 388.005.00 X 389.005.00 X 390.005.00 X 391.005.00 X 392.005.00 X 393.005.00 X 394.005.00 X 395.005.00 X 396.005.00 X 397.005.00 X 398.005.00 X 399.005.00 X 400.005.00 X 415.005.00 X 460.005.00 X 470.00
5.30 X 40.005.30 X 41.205.30 X 41.405.30 X 42.505.30 X 43.70
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
5.00 X 304.005.00 X 305.005.00 X 306.005.00 X 307.005.00 X 308.005.00 X 309.005.00 X 310.005.00 X 311.005.00 X 312.005.00 X 313.005.00 X 314.005.00 X 315.005.00 X 316.005.00 X 317.005.00 X 318.005.00 X 319.005.00 X 320.005.00 X 321.005.00 X 322.005.00 X 323.005.00 X 324.005.00 X 325.005.00 X 326.005.00 X 327.005.00 X 328.005.00 X 329.005.00 X 330.005.00 X 331.005.00 X 332.005.00 X 333.005.00 X 334.005.00 X 335.005.00 X 336.005.00 X 337.005.00 X 338.005.00 X 339.005.00 X 340.005.00 X 341.005.00 X 342.005.00 X 343.005.00 X 344.005.00 X 345.005.00 X 346.005.00 X 347.005.00 X 348.005.00 X 349.005.00 X 350.005.00 X 351.005.00 X 352.005.00 X 353.005.00 X 354.005.00 X 355.005.00 X 356.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
5.00 X 251.005.00 X 252.005.00 X 253.005.00 X 254.005.00 X 255.005.00 X 256.005.00 X 257.005.00 X 258.005.00 X 259.005.00 X 260.005.00 X 261.005.00 X 262.005.00 X 263.005.00 X 264.005.00 X 265.005.00 X 266.005.00 X 267.005.00 X 268.005.00 X 269.005.00 X 270.005.00 X 271.005.00 X 272.005.00 X 273.005.00 X 274.005.00 X 275.005.00 X 276.005.00 X 277.005.00 X 278.005.00 X 279.005.00 X 280.005.00 X 281.005.00 X 282.005.00 X 283.005.00 X 284.005.00 X 285.005.00 X 286.005.00 X 287.005.00 X 288.005.00 X 289.005.00 X 290.005.00 X 291.005.00 X 292.005.00 X 293.005.00 X 294.005.00 X 295.005.00 X 296.005.00 X 297.005.00 X 298.005.00 X 299.005.00 X 300.005.00 X 301.005.00 X 302.005.00 X 303.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:52 PM Page 32
33
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
5.30 X 45.005.30 X 46.205.30 X 47.505.30 X 48.705.30 X 50.005.30 X 51.505.30 X 53.005.30 X 54.405.30 X 54.505.30 X 56.005.30 X 58.005.30 X 60.005.30 X 61.505.30 X 63.005.30 X 65.005.30 X 67.005.30 X 69.005.30 X 71.005.30 X 73.005.30 X 75.005.30 X 77.505.30 X 80.005.30 X 82.505.30 X 85.005.30 X 87.505.30 X 90.005.30 X 92.505.30 X 95.005.30 X 97.505.30 X 100.005.30 X 103.005.30 X 106.005.30 X 109.005.30 X 112.005.30 X 115.005.30 X 118.005.30 X 122.005.30 X 125.005.30 X 128.005.30 X 132.005.30 X 136.005.30 X 140.005.30 X 145.005.30 X 150.005.30 X 155.005.30 X 160.005.30 X 165.005.30 X 170.005.30 X 175.005.30 X 180.005.30 X 185.005.30 X 190.005.30 X 195.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
5.33 X 557.66 -3915.33 X 582.68 -3925.33 X 608.08 -3935.33 X 633.48 -3945.33 X 658.88 -3955.33 X 702.66
5.50 X 34.005.50 X 72.005.50 X 75.005.50 X 145.00
5.70 X 24.205.70 X 35.205.70 X 36.205.70 X 37.205.70 X 39.205.70 X 41.205.70 X 44.205.70 X 44.305.70 X 45.205.70 X 45.305.70 X 47.205.70 X 47.60 P48A5.70 X 49.205.70 X 49.305.70 X 49.60 P50A5.70 X 51.205.70 X 51.60 P525.70 X 52.205.70 X 52.305.70 X 52.505.70 X 52.60 P535.70 X 53.005.70 X 54.205.70 X 54.305.70 X 54.60 P555.70 X 55.205.70 X 55.305.70 X 55.60 P565.70 X 57.205.70 X 57.60 P585.70 X 59.205.70 X 59.305.70 X 59.60 P605.70 X 59.705.70 X 61.205.70 X 61.60 P625.70 X 62.005.70 X 62.205.70 X 62.305.70 X 62.60 P635.70 X 64.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
5.33 X 123.83 BS8625.33 X 126.37 -3535.33 X 127.00 BS8635.33 X 129.54 -3545.33 X 130.18 BS8645.33 X 132.72 -3555.33 X 133.35 BS8655.33 X 135.89 -3565.33 X 136.53 BS8665.33 X 139.07 -3575.33 X 139.70 BS8675.33 X 142.24 -3585.33 X 142.88 BS8685.33 X 145.42 -3595.33 X 146.05 BS8695.33 X 148.59 -3605.33 X 149.23 BS8705.33 X 151.77 -3615.33 X 155.00 BS6445.33 X 158.12 -3625.33 X 161.30 BS6455.33 X 164.47 -3635.33 X 167.70 BS6465.33 X 170.82 -3645.33 X 174.00 BS6475.33 X 177.17 -3655.33 X 183.52 -3665.33 X 189.87 -3675.33 X 196.22 -3685.33 X 202.57 -3695.33 X 208.92 -3705.33 X 215.27 -3715.33 X 221.62 -3725.33 X 227.97 -3735.33 X 234.32 -3745.33 X 240.67 -3755.33 X 247.02 -3765.33 X 253.37 -3775.33 X 266.07 -3785.33 X 278.77 -3795.33 X 291.47 -3805.33 X 291.695.33 X 304.17 -3815.33 X 329.57 -3825.33 X 354.97 -3835.33 X 380.37 -3845.33 X 405.26 -3855.33 X 430.66 -3865.33 X 456.06 -3875.33 X 481.46 -3885.33 X 491.495.33 X 506.86 -3895.33 X 532.26 -390
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
5.30 X 200.00
5.33 X 10.46 -3095.33 X 12.07 -3105.33 X 13.64 -3115.33 X 15.24 -3125.33 X 16.81 -3135.33 X 18.42 -3145.33 X 19.99 -3155.33 X 21.59 -3165.33 X 23.16 -3175.33 X 24.77 -3185.33 X 26.34 -3195.33 X 27.94 -3205.33 X 29.51 -3215.33 X 31.12 -3225.33 X 32.69 -3235.33 X 34.29 -3245.33 X 37.47 -3255.33 X 40.64 -3265.33 X 43.82 -3275.33 X 46.99 -3285.33 X 50.17 -3295.33 X 53.34 -3305.33 X 56.52 -3315.33 X 59.69 -3325.33 X 62.87 -3335.33 X 66.04 -3345.33 X 69.22 -3355.33 X 72.39 -3365.33 X 74.63 BS6195.33 X 75.57 -3375.33 X 78.74 -3385.33 X 79.73 BS6205.33 X 81.92 -3395.33 X 85.09 -3405.33 X 88.27 -3415.33 X 89.69 BS6215.33 X 91.44 -3425.33 X 94.62 -3435.33 X 97.79 -3445.33 X 100.00 BS6225.33 X 100.97 -3455.33 X 104.14 -3465.33 X 107.32 -3475.33 X 109.54 BS6235.33 X 110.49 -3485.33 X 113.67 -3495.33 X 116.84 -3505.33 X 117.48 BS8605.33 X 120.02 -3515.33 X 120.65 BS8615.33 X 123.19 -352
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:52 PM Page 33
34
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
5.70 X 64.205.70 X 64.305.70 X 64.60 P655.70 X 66.60 P675.70 X 67.205.70 X 67.60 P685.70 X 69.005.70 X 69.205.70 X 69.305.70 X 69.60 P705.70 X 70.205.70 X 70.60 P715.70 X 71.205.70 X 72.205.70 X 72.305.70 X 74.005.70 X 74.205.70 X 74.305.70 X 74.60 P755.70 X 77.205.70 X 79.005.70 X 79.205.70 X 79.305.70 X 79.60 P805.70 X 81.205.70 X 82.205.70 X 84.005.70 X 84.105.70 X 84.205.70 X 84.305.70 X 84.60 P855.70 X 87.205.70 X 89.005.70 X 89.105.70 X 89.205.70 X 89.305.70 X 89.60 P905.70 X 92.205.70 X 94.005.70 X 94.105.70 X 94.205.70 X 94.305.70 X 94.60 P955.70 X 97.205.70 X 99.005.70 X 99.105.70 X 99.205.70 X 99.305.70 X 99.60 P1005.70 X 101.60 P1025.70 X 104.005.70 X 104.105.70 X 104.20
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
6.00 X 22.006.00 X 23.006.00 X 23.506.00 X 24.006.00 X 25.006.00 X 26.006.00 X 27.006.00 X 28.006.00 X 29.006.00 X 30.006.00 X 31.006.00 X 32.006.00 X 33.006.00 X 34.006.00 X 35.006.00 X 36.006.00 X 37.006.00 X 38.006.00 X 39.006.00 X 39.506.00 X 40.006.00 X 41.006.00 X 41.506.00 X 42.006.00 X 43.006.00 X 44.006.00 X 44.506.00 X 45.006.00 X 46.006.00 X 47.006.00 X 48.006.00 X 49.006.00 X 50.006.00 X 51.006.00 X 52.006.00 X 53.006.00 X 54.006.00 X 55.006.00 X 56.006.00 X 57.006.00 X 58.006.00 X 59.506.00 X 60.006.00 X 61.006.00 X 62.006.00 X 63.006.00 X 64.006.00 X 65.006.00 X 66.006.00 X 67.006.00 X 68.006.00 X 69.006.00 X 70.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
5.70 X 199.205.70 X 199.30 G2005.70 X 204.205.70 X 209.205.70 X 209.30 G2105.70 X 219.30 G2205.70 X 229.30 G2305.70 X 234.305.70 X 239.30 G2405.70 X 249.30 G2505.70 X 259.30 G2605.70 X 269.30 G2705.70 X 279.30 G2805.70 X 289.205.70 X 289.30 G2905.70 X 299.30 G3005.70 X 319.305.70 X 329.305.70 X 339.305.70 X 349.305.70 X 359.305.70 X 379.305.70 X 399.305.70 X 419.305.70 X 439.305.70 X 449.205.70 X 459.305.70 X 479.305.70 X 499.305.70 X 519.305.70 X 529.305.70 X 594.005.70 X 594.305.70 X 725.00
5.80 X 11.705.80 X 218.00
6.00 X 6.006.00 X 7.006.00 X 9.006.00 X 10.006.00 X 11.006.00 X 12.006.00 X 13.006.00 X 14.006.00 X 15.006.00 X 16.006.00 X 18.006.00 X 19.006.00 X 19.506.00 X 20.006.00 X 21.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
5.70 X 104.305.70 X 104.60 P1055.70 X 109.005.70 X 109.105.70 X 109.205.70 X 109.305.70 X 109.60 P1105.70 X 111.60 P1125.70 X 114.005.70 X 114.205.70 X 114.305.70 X 114.60 P1155.70 X 119.005.70 X 119.205.70 X 119.305.70 X 119.505.70 X 119.60 P1205.70 X 124.005.70 X 124.305.70 X 124.60 P1255.70 X 125.305.70 X 129.205.70 X 129.305.70 X 129.60 P1305.70 X 131.60 P1325.70 X 132.205.70 X 133.205.70 X 134.205.70 X 134.305.70 X 134.60 P1355.70 X 139.205.70 X 139.305.70 X 139.60 P1405.70 X 144.205.70 X 144.305.70 X 144.60 P1455.70 X 149.205.70 X 149.30 G1505.70 X 149.60 P1505.70 X 154.30 G1555.70 X 159.30 G1605.70 X 164.205.70 X 164.30 G1655.70 X 168.005.70 X 169.30 G1705.70 X 174.205.70 X 174.30 G1755.70 X 179.30 G1805.70 X 184.30 G1855.70 X 189.205.70 X 189.30 G1905.70 X 194.205.70 X 194.30 G195
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:52 PM Page 34
35
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
6.00 X 72.006.00 X 73.006.00 X 74.006.00 X 75.006.00 X 76.006.00 X 78.006.00 X 78.506.00 X 79.006.00 X 80.006.00 X 81.006.00 X 81.506.00 X 84.006.00 X 85.006.00 X 86.006.00 X 88.006.00 X 90.006.00 X 92.006.00 X 93.006.00 X 95.006.00 X 96.006.00 X 98.006.00 X 99.006.00 X 100.006.00 X 101.006.00 X 103.006.00 X 104.006.00 X 104.506.00 X 105.006.00 X 106.006.00 X 108.006.00 X 110.006.00 X 111.006.00 X 112.006.00 X 114.006.00 X 115.006.00 X 118.006.00 X 120.006.00 X 122.006.00 X 123.006.00 X 124.006.00 X 125.006.00 X 126.006.00 X 128.006.00 X 130.006.00 X 132.006.00 X 134.006.00 X 135.006.00 X 136.006.00 X 138.006.00 X 139.206.00 X 140.006.00 X 142.006.00 X 143.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
6.00 X 375.006.00 X 376.00 V3806.00 X 380.006.00 X 385.006.00 X 386.006.00 X 388.006.00 X 389.006.00 X 390.006.00 X 392.006.00 X 394.006.00 X 395.006.00 X 398.006.00 X 400.006.00 X 415.006.00 X 422.006.00 X 425.50 V4306.00 X 429.006.00 X 446.006.00 X 448.006.00 X 450.006.00 X 453.006.00 X 470.006.00 X 478.006.00 X 480.006.00 X 483.006.00 X 486.006.00 X 489.006.00 X 500.006.00 X 504.006.00 X 505.006.00 X 508.006.00 X 510.006.00 X 516.006.00 X 530.006.00 X 540.006.00 X 544.006.00 X 549.006.00 X 552.006.00 X 555.006.00 X 560.006.00 X 569.006.00 X 575.006.00 X 579.00
6.20 X 422.20
6.35 X 610.00
6.50 X 50.006.50 X 57.00
6.90 X 422.20
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
6.00 X 230.006.00 X 235.006.00 X 236.006.00 X 237.006.00 X 237.506.00 X 238.006.00 X 240.006.00 X 242.006.00 X 244.006.00 X 247.006.00 X 249.006.00 X 250.006.00 X 258.006.00 X 259.006.00 X 260.006.00 X 262.006.00 X 265.006.00 X 266.006.00 X 270.006.00 X 272.00 V2756.00 X 278.006.00 X 280.006.00 X 284.006.00 X 285.006.00 X 288.006.00 X 290.006.00 X 294.006.00 X 295.006.00 X 300.006.00 X 301.006.00 X 305.006.00 X 310.006.00 X 311.006.00 X 315.006.00 X 320.006.00 X 321.50 V3256.00 X 324.006.00 X 325.006.00 X 330.006.00 X 333.006.00 X 335.006.00 X 338.006.00 X 340.006.00 X 345.006.00 X 347.006.00 X 348.006.00 X 350.006.00 X 355.006.00 X 358.006.00 X 360.006.00 X 365.006.00 X 368.006.00 X 370.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
6.00 X 145.006.00 X 146.006.00 X 148.006.00 X 150.006.00 X 153.006.00 X 154.006.00 X 155.006.00 X 155.506.00 X 156.006.00 X 157.006.00 X 158.006.00 X 159.006.00 X 160.006.00 X 162.006.00 X 165.006.00 X 166.006.00 X 169.006.00 X 170.006.00 X 172.006.00 X 175.006.00 X 176.006.00 X 180.006.00 X 182.006.00 X 184.006.00 X 185.006.00 X 188.006.00 X 190.006.00 X 191.206.00 X 193.006.00 X 195.006.00 X 196.006.00 X 198.006.00 X 200.006.00 X 201.006.00 X 202.006.00 X 203.006.00 X 203.506.00 X 204.006.00 X 205.006.00 X 206.006.00 X 208.006.00 X 210.006.00 X 212.006.00 X 215.006.00 X 216.006.00 X 217.006.00 X 218.006.00 X 220.006.00 X 221.006.00 X 222.50 V2256.00 X 225.006.00 X 226.006.00 X 229.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:52 PM Page 35
36
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
6.99 X 34.29 -4006.99 X 37.46 -4016.99 X 40.64 -4026.99 X 43.81 -4036.99 X 46.99 -4046.99 X 50.16 -4056.99 X 53.34 -4066.99 X 56.51 -4076.99 X 59.69 -4086.99 X 62.86 -4096.99 X 66.04 -4106.99 X 69.21 -4116.99 X 72.39 -4126.99 X 75.56 -4136.99 X 78.74 -4146.99 X 81.91 -4156.99 X 85.09 -4166.99 X 88.26 -4176.99 X 91.44 -4186.99 X 94.61 -4196.99 X 97.79 -4206.99 X 100.96 -4216.99 X 104.14 -4226.99 X 107.31 -4236.99 X 110.49 -4246.99 X 113.67 -4256.99 X 114.70 BS6246.99 X 116.84 -4266.99 X 120.02 -4276.99 X 123.19 -4286.99 X 124.60 BS6256.99 X 126.37 -4296.99 X 129.54 -4306.99 X 132.72 -4316.99 X 134.50 BS6266.99 X 135.89 -4326.99 X 139.07 -4336.99 X 142.24 -4346.99 X 145.42 -4356.99 X 148.59 -4366.99 X 151.77 -4376.99 X 155.60 BS8726.99 X 158.12 -4386.99 X 159.50 BS6276.99 X 161.90 BS8746.99 X 164.47 -4396.99 X 166.70 BS6286.99 X 168.30 BS8766.99 X 170.82 -4406.99 X 174.60 BS8786.99 X 177.17 -4416.99 X 181.00 BS8806.99 X 183.52 -442
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
7.00 X 615.007.00 X 630.007.00 X 647.077.00 X 650.007.00 X 670.007.00 X 699.007.00 X 724.007.00 X 730.507.00 X 745.007.00 X 760.007.00 X 880.00
7.50 X 75.00
8.00 X 25.008.00 X 42.008.00 X 57.008.00 X 60.008.00 X 97.008.00 X 100.008.00 X 108.008.00 X 114.008.00 X 150.008.00 X 160.008.00 X 180.008.00 X 195.008.00 X 216.008.00 X 226.008.00 X 230.008.00 X 240.008.00 X 242.008.00 X 260.008.00 X 265.008.00 X 280.008.00 X 310.008.00 X 326.008.00 X 330.008.00 X 350.008.00 X 360.008.00 X 400.008.00 X 425.008.00 X 450.008.00 X 460.008.00 X 490.008.00 X 500.008.00 X 520.008.00 X 630.008.00 X 638.008.00 X 800.00
8.30 X 125.00
8.40 X 144.10
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
7.00 X 70.007.00 X 75.007.00 X 82.007.00 X 90.007.00 X 95.007.00 X 105.007.00 X 110.007.00 X 192.007.00 X 206.007.00 X 212.007.00 X 218.007.00 X 224.007.00 X 230.007.00 X 236.007.00 X 243.007.00 X 250.007.00 X 250.377.00 X 258.007.00 X 265.007.00 X 272.007.00 X 280.007.00 X 290.007.00 X 300.007.00 X 307.007.00 X 315.007.00 X 325.007.00 X 335.007.00 X 345.007.00 X 355.007.00 X 360.007.00 X 365.007.00 X 375.007.00 X 387.007.00 X 400.007.00 X 412.007.00 X 425.007.00 X 437.007.00 X 450.007.00 X 457.207.00 X 462.007.00 X 475.007.00 X 487.007.00 X 490.007.00 X 494.677.00 X 500.007.00 X 515.007.00 X 530.007.00 X 545.007.00 X 545.477.00 X 560.007.00 X 580.007.00 X 596.277.00 X 600.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
6.99 X 187.30 BS8826.99 X 189.87 -4436.99 X 193.70 BS8846.99 X 196.22 -4446.99 X 200.00 BS8866.99 X 202.57 -4456.99 X 208.92 BS6746.99 X 215.27 -4466.99 X 221.62 BS6766.99 X 227.97 -4476.99 X 234.32 BS6786.99 X 240.67 -4486.99 X 247.00 BS6806.99 X 253.37 -4496.99 X 259.70 BS6826.99 X 266.07 -4506.99 X 272.40 BS6846.99 X 278.77 -4516.99 X 285.10 BS6866.99 X 291.47 -4526.99 X 297.80 BS6886.99 X 304.17 -4536.99 X 310.50 BS6486.99 X 316.87 -4546.99 X 323.20 BS6496.99 X 329.57 -4556.99 X 335.90 BS6506.99 X 342.27 -4566.99 X 354.97 -4576.99 X 367.67 -4586.99 X 380.37 -4596.99 X 393.07 -4606.99 X 405.26 -4616.99 X 417.96 -4626.99 X 430.66 -4636.99 X 443.36 -4646.99 X 456.06 -4656.99 X 468.76 -4666.99 X 481.46 -4676.99 X 494.16 -4686.99 X 506.86 -4696.99 X 532.26 -4706.99 X 557.66 -4716.99 X 582.68 -4726.99 X 608.08 -4736.99 X 633.48 -4746.99 X 658.88 -4756.99 X 675.16
7.00 X 12.007.00 X 54.007.00 X 60.00
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:52 PM Page 36
37
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
8.40 X 149.108.40 X 149.50 P150A8.40 X 154.108.40 X 154.50 P1558.40 X 159.108.40 X 159.50 P1608.40 X 164.108.40 X 164.50 P1658.40 X 169.108.40 X 169.50 P1708.40 X 174.108.40 X 174.50 P1758.40 X 179.108.40 X 179.50 P1808.40 X 184.108.40 X 184.50 P1858.40 X 189.108.40 X 189.50 P1908.40 X 194.108.40 X 194.50 P1958.40 X 199.108.40 X 199.50 P2008.40 X 204.108.40 X 204.50 P2058.40 X 208.50 P2098.40 X 209.108.40 X 209.50 P2108.40 X 214.50 P2158.40 X 219.108.40 X 219.50 P2208.40 X 224.50 P2258.40 X 229.108.40 X 229.50 P2308.40 X 234.108.40 X 234.50 P2358.40 X 239.108.40 X 239.50 P2408.40 X 244.50 P2458.40 X 249.108.40 X 249.50 P2508.40 X 254.50 P2558.40 X 259.50 P2608.40 X 264.50 P2658.40 X 269.50 P2708.40 X 274.50 P2758.40 X 279.50 P2808.40 X 284.50 P2858.40 X 289.50 P2908.40 X 294.50 P2958.40 X 299.50 P3008.40 X 304.008.40 X 314.50 P3158.40 X 319.50 P320
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
8.40 X 334.50 P3358.40 X 339.50 P3408.40 X 354.50 P3558.40 X 359.50 P3608.40 X 374.50 P3758.40 X 375.008.40 X 384.50 P3858.40 X 399.50 P400
9.00 X 75.009.00 X 84.009.00 X 205.009.00 X 316.009.00 X 335.009.00 X 360.009.00 X 402.009.00 X 451.009.00 X 480.009.00 X 545.00
10.00 X 35.0010.00 X 38.0010.00 X 92.0010.00 X 105.0010.00 X 120.0010.00 X 140.0010.00 X 160.0010.00 X 195.0010.00 X 205.0010.00 X 228.0010.00 X 264.0010.00 X 270.0010.00 X 280.0010.00 X 292.0010.00 X 300.0010.00 X 315.0010.00 X 325.0010.00 X 330.0010.00 X 340.0010.00 X 360.0010.00 X 380.0010.00 X 450.0010.00 X 475.00 V48010.00 X 524.50 V53010.00 X 579.00 V58510.00 X 633.50 V64010.00 X 683.00 V69010.00 X 700.0010.00 X 732.50 V74010.00 X 782.00 V79010.00 X 836.50 V84510.00 X 1044.00 V1055
CROSS INSIDE SIZESECTION DIAMETER CROSS(mm) (mm) REF.
Metric O-Rings (Continued)
Batch Numbers
and
Cure Dates
are provided upon request
on your
O-Ring Orders.
(Metric O-Ring Tolerances – Page 40)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:52 PM Page 37
38
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
P3 1.90 X 2.80P4 1.90 X 3.80P5 1.90 X 4.80P6 1.90 X 5.80P7 1.90 X 6.80
P8 1.90 X 7.80P9 1.90 X 8.80P10 1.90 X 9.80P10A 2.40 X 9.80P11 2.40 X 10.80
P11.2 2.40 X 11.00P12 2.40 X 11.80P12.5 2.40 X 12.30P14 2.40 X 13.80P15 2.40 X 14.80
P16 2.40 X 15.80P18 2.40 X 17.80P20 2.40 X 19.80P21 2.40 X 20.80P22 2.40 X 21.80
P22A 3.50 X 21.70P22.4 3.50 X 22.10P24 3.50 X 23.70P25 3.50 X 24.70P25.5 3.50 X 25.20
P26 3.50 X 25.70P28 3.50 X 27.70P29 3.50 X 28.70P29.5 3.50 X 29.20P30 3.50 X 29.70
P31 3.50 X 30.70P31.5 3.50 X 31.20P32 3.50 X 31.70P34 3.50 X 33.70P35 3.50 X 34.70
P35.5 3.50 X 35.20P36 3.50 X 35.70P38 3.50 X 37.70P39 3.50 X 38.70P40 3.50 X 39.70
P41 3.50 X 40.70P42 3.50 X 41.70P44 3.50 X 43.70P45 3.50 X 44.70P46 3.50 X 45.70
P48 3.50 X 47.70P49 3.50 X 48.70P50 3.50 X 49.70P48A 5.70 X 47.60P50A 5.70 X 49.60
P52 5.70 X 51.60P53 5.70 X 52.60P55 5.70 X 54.60P56 5.70 X 55.60P58 5.70 X 57.60
P60 5.70 X 59.60P62 5.70 X 61.60P63 5.70 X 62.60P65 5.70 X 64.60P67 5.70 X 66.60
P70 5.70 X 69.60P71 5.70 X 70.60P75 5.70 X 74.60P80 5.70 X 79.60P85 5.70 X 84.60
P90 5.70 X 89.60P95 5.70 X 94.60P100 5.70 X 99.60P102 5.70 X 101.60P105 5.70 X 104.60
P110 5.70 X 109.60P112 5.70 X 111.60P115 5.70 X 114.60P120 5.70 X 119.60P125 5.70 X 124.60
P130 5.70 X 129.60P132 5.70 X 131.60P135 5.70 X 134.60P140 5.70 X 139.60P145 5.70 X 144.60
P150 5.70 X 149.60P150A 8.40 X 149.50P155 8.40 X 154.50P160 8.40 X 159.50P165 8.40 X 164.50
P170 8.40 X 169.50P175 8.40 X 174.50P180 8.40 X 179.50P185 8.40 X 184.50P190 8.40 X 189.50
Japanese Industrial StandardsDimensional Data
JIS CROSS INSIDENO. SECTION DIA.
(mm) (mm)
JIS CROSS INSIDENO. SECTION DIA.
(mm) (mm)
JIS CROSS INSIDENO. SECTION DIA.
(mm) (mm)
P195 8.40 X 194.50P200 8.40 X 199.50P205 8.40 X 204.50P209 8.40 X 208.50P210 8.40 X 209.50
P215 8.40 X 214.50P220 8.40 X 219.50P225 8.40 X 224.50P230 8.40 X 229.50P235 8.40 X 234.50
P240 8.40 X 239.50P245 8.40 X 244.50P250 8.40 X 249.50P255 8.40 X 254.50P260 8.40 X 259.50
P265 8.40 X 264.50P270 8.40 X 269.50P275 8.40 X 274.50P280 8.40 X 279.50P285 8.40 X 284.50
P290 8.40 X 289.50P295 8.40 X 294.50P300 8.40 X 299.50P315 8.40 X 314.50P320 8.40 X 319.50
P335 8.40 X 334.50P340 8.40 X 339.50P355 8.40 X 354.50P360 8.40 X 359.50P375 8.40 X 374.50
P385 8.40 X 384.50P400 8.40 X 399.50
PSeries G Series
JIS CROSS INSIDENO. SECTION DIA.
(mm) (mm)
G25 3.10 24.40G30 3.10 29.40G35 3.10 34.40G40 3.10 39.40G45 3.10 44.40
G50 3.10 49.40G55 3.10 54.40G60 3.10 59.40G65 3.10 64.40G70 3.10 69.40
G75 3.10 74.40G80 3.10 79.40G85 3.10 84.40G90 3.10 89.40G95 3.10 94.40
G100 3.10 99.40G105 3.10 104.40G110 3.10 109.40G115 3.10 114.40G120 3.10 119.40
G125 3.10 124.40G130 3.10 129.40G135 3.10 134.40G140 3.10 139.40G145 3.10 144.40
G150 5.70 149.30G155 5.70 154.30G160 5.70 159.30G165 5.70 164.30G170 5.70 169.30
G175 5.70 174.30G180 5.70 179.30G185 5.70 184.30G190 5.70 189.30G195 5.70 194.30
G200 5.70 199.30G210 5.70 209.30G220 5.70 219.30G230 5.70 229.30G240 5.70 239.30
G250 5.70 249.30G260 5.70 259.30G270 5.70 269.30G280 5.70 279.30G290 5.70 289.30
G300 5.70 299.30
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 38
39
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Japanese Industrial StandardsDimensional Data (Continued)
JIS CROSS INSIDENO. SECTION DIA.
(mm) (mm)
JIS CROSS INSIDENO. SECTION DIA.
(mm) (mm)
JIS CROSS INSIDENO. SECTION DIA.
(mm) (mm)
S Series V Series
S45 2.00 X 44.50S46 2.00 X 45.50S48 2.00 X 47.50S50 2.00 X 49.50S53 2.00 X 52.50
S55 2.00 X 54.50S56 2.00 X 55.50S60 2.00 X 59.50S63 2.00 X 62.50S65 2.00 X 64.50
S67 2.00 X 66.50S70 2.00 X 69.50S71 2.00 X 70.50S75 2.00 X 74.50S80 2.00 X 79.50
S85 2.00 X 84.50S90 2.00 X 89.50S95 2.00 X 94.50S100 2.00 X 99.50S105 2.00 X 104.50
S110 2.00 X 109.50S112 2.00 X 111.50S115 2.00 X 114.50S120 2.00 X 119.50S125 2.00 X 124.50
S130 2.00 X 129.50S132 2.00 X 131.50S135 2.00 X 134.50S140 2.00 X 139.50S145 2.00 X 144.50
S150 2.00 X 149.50
V15 4.00 X 14.50V24 4.00 X 23.50V34 4.00 X 33.50V40 4.00 X 39.50V55 4.00 X 54.50
V70 4.00 X 69.00V85 4.00 X 84.00V100 4.00 X 99.00V120 4.00 X 119.00V150 4.00 X 148.50
V175 4.00 X 173.00V225 6.00 X 222.50V275 6.00 X 272.00V325 6.00 X 321.50V380 6.00 X 376.00
V430 6.00 X 425.50V480 10.00 X 475.00V530 10.00 X 524.50V585 10.00 X 579.00V640 10.00 X 633.50
V690 10.00 X 683.00V740 10.00 X 732.50V790 10.00 X 782.00V845 10.00 X 836.50V950 10.00 X 940.50
V1055 10.00 X 1044.00
S3 1.50 X 2.50S4 1.50 X 3.50S5 1.50 X 4.50S6 1.50 X 5.50S7 1.50 X 6.50
S8 1.50 X 7.50S9 1.50 X 8.50S10 1.50 X 9.50S11.2 1.50 X 10.70S12 1.50 X 11.50
S12.5 1.50 X 12.00S14 1.50 X 13.50S15 1.50 X 14.50S16 1.50 X 15.50S18 1.50 X 17.50
S20 1.50 X 19.50S22 1.50 X 21.50S22.4 2.00 X 21.90S24 2.00 X 23.50S25 2.00 X 24.50
S26 2.00 X 25.50S28 2.00 X 27.50S29 2.00 X 28.50S30 2.00 X 29.50S31.5 2.00 X 31.00
S32 2.00 X 31.50S34 2.00 X 33.50S35 2.00 X 34.50S35.5 2.00 X 35.00S36 2.00 X 35.50
S38 2.00 X 37.50S39 2.00 X 38.50S40 2.00 X 39.50S42 2.00 X 41.50S43 2.00 X 42.50S44 2.00 X 43.50
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 39
40
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
1.80 – 2.79 ± 0.132.80 – 4.86 ± 0.144.87 – 6.69 ± 0.156.70 – 8.75 ± 0.168.76 – 10.59 ± 0.1710.5 – 11.79 ± 0.1811.8 – 14.99 ± 0.1915.0 – 16.99 ± 0.2017.0 – 18.99 ± 0.2119.0 – 21.19 ± 0.2221.2 – 22.39 ± 0.2322.4 – 24.99 ± 0.2425.0 – 25.79 ± 0.2525.8 – 27.99 ± 0.2628.0 – 29.99 ± 0.2830.0 – 31.49 ± 0.2931.5 – 32.49 ± 0.3132.5 – 34.49 ± 0.3234.5 – 35.49 ± 0.3335.5 – 36.49 ± 0.3436.5 – 37.49 ± 0.3537.5 – 38.59 ± 0.3638.7 – 39.99 ± 0.3740.0 – 41.19 ± 0.3841.2 – 42.49 ± 0.3942.5 – 43.69 ± 0.4043.7 – 44.99 ± 0.4145.0 – 46.19 ± 0.4246.2 – 47.49 ± 0.4347.5 – 48.69 ± 0.4448.7 – 49.99 ± 0.4550.0 – 51.49 ± 0.4651.5 – 52.99 ± 0.4753.0 – 54.49 ± 0.4854.5 – 55.99 ± 0.5056.0 – 57.99 ± 0.5158.0 – 59.99 ± 0.5260.0 – 61.49 ± 0.5461.5 – 52.99 ± 0.5563.0 – 64.99 ± 0.586.50 – 68.99 ± 0.5867.0 – 68.99 ± 0.5969.0 – 70.99 ± 0.6171.0 – 72.99 ± 0.6373.0 – 74.99 ± 0.64
Metric O-Ring Tolerances(DIN 3771, Part 1 and ISO 3601/1)
INSIDEDIAMETER TOLERANCE
(mm) (mm)75.0 – 77.49 ± 0.6677.5 – 79.99 ± 0.6780.0 – 82.49 ± 0.6982.5 – 84.99 ± 0.7185.0 – 87.49 ± 0.7387.5 – 89.99 ± 0.7590.0 – 92.49 ± 0.7792.5 – 94.99 ± 0.7995.0 – 97.49 ± 0.8197.5 – 99.99 ± 0.83100 – 102.9 ± 0.84103 – 105.9 ± 0.87106 – 108.9 ± 0.89109 – 111.9 ± 0.91112 – 114.9 ± 0.93115 – 117.9 ± 0.95118 – 121.9 ± 0.97122 – 124.9 ± 1.00125 – 127.9 ± 1.03128 – 131.9 ± 1.05132 – 135.9 ± 1.08136 – 139.9 ± 1.10140 – 144.9 ± 1.13145 – 149.9 ± 1.17150 – 154.9 ± 1.20155 – 159.9 ± 1.24160 – 164.9 ± 1.27165 – 169.9 ± 1.31170 – 174.9 ± 1.34175 – 179.9 ± 1.38180 – 184.9 ± 1.41185 – 189.9 ± 1.44190 – 194.9 ± 1.48195 – 199.9 ± 1.51200 – 205.9 ± 1.55206 – 211.9 ± 1.59212 – 217.9 ± 1.63218 – 223.9 ± 1.67224 – 229.9 ± 1.71230 – 235.9 ± 1.75238 – 242.9 ± 1.79243 – 249.9 ± 1.83250 – 257.9 ± 1.88258 – 264.9 ± 1.93265 – 271.9 ± 1.98
INSIDEDIAMETER TOLERANCE
(mm) (mm)272 – 279.9 ± 2.02280 – 289.9 ± 2.08290 – 299.9 ± 2.14300 – 306.9 ± 2.21307 – 314.9 ± 2.25315 – 324.9 ± 2.30325 – 334.9 ± 2.37335 – 344.9 ± 2.43345 – 354.9 ± 2.49355 – 364.9 ± 2.56365 – 374.9 ± 2.62375 – 386.9 ± 2.68387 – 399.9 ± 2.78400 – 411.9 ± 2.84412 – 424.9 ± 2.91425 – 436.9 ± 2.99437 – 449.9 ± 3.07450 – 461.9 ± 3.15462 – 474.9 ± 3.22475 – 486.9 ± 3.30487 – 499.9 ± 3.37500 – 514.9 ± 3.45515 – 529.9 ± 3.54530 – 544.9 ± 3.63545 – 559.9 ± 3.72560 – 579.9 ± 3.81580 – 599.9 ± 3.93600 – 614.9 ± 4.05615 – 629.9 ± 4.13630 – 649.9 ± 4.22650 – 669.9 ± 4.34670 – 689.9 ± 4.46
≥ 690 ± 0.65%
INSIDEDIAMETER TOLERANCE
(mm) (mm)
≤ 2.62 ± 0.082.63 – 3.00 ± 0.093.01 – 4.50 ± 0.104.51 – 5.50 ± 0.135.51 – 7.50 ± 0.157.51 – 8.50 ± 0.188.51 – 10.0 ± 0.20
CROSSSECTION TOLERANCE(mm) (mm)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 40
41
AS568 NOMINAL ACTUALSERIES SIZE
Q-DASHNO. I.D. O.D. C/S I.D.
Q-Ring Sizes and Dimensions
-004 TO -050 Cross Section Diameters— .070 ± .003 inches
*-001 1/32 X 3/32 X 1/32 .029*-002 3/64 X 9/64 X 1/32 .042*-003 1/16 X 3/16 X 1/16 .056-004 5/64 X 13/64 X 1/16 .070-005 3/32 X 7/32 X 1/16 .101
-006 1/8 X 1/4 X 1/16 .114-007 5/32 X 9/32 X 1/16 .145-008 3/16 X 5/16 X 1/16 .176-009 7/32 X 11/32 X 1/16 .208-010 1/4 X 3/8 X 1/16 .239
-011 5/16 X 7/16 X 1/16 .301-012 3/8 X 1/2 X 1/16 .364-013 7/16 X 9/16 X 1/16 .426-014 1/2 X 5/8 X 1/16 .489-015 9/16 X 11/16 X 1/16 .551
-016 5/8 X 3/4 X 1/16 .614-017 11/16 X 13/16 X 1/16 .676-018 3/4 X 7/8 X 1/16 .739-019 13/16 X 15/16 X 1/16 .801-020 7/8 X 1 X 1/16 .864
-021 15/16 X 1-1/16 X 1/16 .926-022 1 X 1-1/8 X 1/16 .989-023 1-1/16 X 1-3/16 X 1/16 1.051-024 1-1/8 X 1-1/4 X 1/16 1.114-025 1-3/16 X 1-5/16 X 1/16 1.176
-026 1-1/4 X 1-3/8 X 1/16 1.239-027 1-5/16 X 1-7/16 X 1/16 1.301-028 1-3/8 X 1-1/2 X 1/16 1.364-029 1-1/2 X 1-5/8 X 1/16 1.489-030 1-5/8 X 1-3/4 X 1/16 1.614
-031 1-3/4 X 1-7/8 X 1/16 1.739-032 1-7/8 X 2 X 1/16 1.864-033 2 X 2-1/8 X 1/16 1.989-034 2-1/8 X 2-1/4 X 1/16 2.114-035 2-1/4 X 2-3/8 X 1/16 2.239
-036 2-3/8 X 2-1/2 X 1/16 2.364-037 2-1/2 X 2-5/8 X 1/16 2.489-038 2-5/8 X 2-3/4 X 1/16 2.614-039 2-3/4 X 2-7/8 X 1/16 2.739-040 2-7/8 X 3 X 1/16 2.864
* Cross Section Diameter: - 001 - .040 + .003 in./1.02 + .08 mm.- 002 - .050 + .003 in./1.27 + .08 mm.- 003 - .060 + .003 in./1.52 + .08 mm.
AS568 NOMINAL ACTUALSERIES SIZE
Q-DASHNO. I.D. O.D. C/S I.D.
-004 TO -050 Cross Section Diameters— .070 ± .003 inches
-041 3 X 3-1/8 X 1/16 2.989-042 3-1/4 X 3-3/8 X 1/16 3.239-043 3-1/2 X 3-5/8 X 1/16 3.489-044 3-3/4 X 3-7/8 X 1/16 3.739-045 4 X 4-1/8 X 1/16 3.989
-046 4-1/4 X 4-3/8 X 1/16 4.239-047 4-1/2 X 4-5/8 X 1/16 4.489-048 4-3/4 X 4-7/8 X 1/16 4.739-049 5 X 5-1/8 X 1/16 4.989-050 5-1/4 X 5-3/8 X 1/16 5.239
-102 to -178 Cross Section Diameters - .103 ± .003 inches
-102 1/16 X 1/4 X 3/32 .049-103 3/32 X 9/32 X 3/32 .081-104 1/8 X 5/16 X 3/32 .112-105 5/32 X 11/32 X 3/32 .143
-106 3/16 X 3/8 X 3/32 .174-107 7/32 X 13/32 X 3/32 .206-108 1/4 X 7/16 X 3/32 .237-109 5/16 X 1/2 X 3/32 .299-110 3/8 X 9/16 X 3/32 .362
-111 7/16 X 5/8 X 3/32 .424-112 1/2 X 11/16 X 3/32 .487-113 9/16 X 3/4 X 3/32 .549-114 5/8 X 13/16 X 3/32 .612-115 11/16 X 7/8 X 3/32 .674
-116 3/4 X 15/16 X 3/32 .737-117 13/16 X 1 X 3/32 .799-118 7/8 X 1-1/16 X 3/32 .862-119 15/16 X 1-1/8 X 3/32 .924-120 1 X 1-3/16 X 3/32 .987
-121 1-1/16 X 1-1/4 X 3/32 1.049-122 1-1/8 X 1-5/16 X 3/32 1.112-123 1-3/16 X 1-3/8 X 3/32 1.174-124 1-1/4 X 1-7/16 X 3/32 1.237-125 1-5/16 X 1-1/2 X 3/32 1.299
-126 1-3/8 X 1-9/16 X 3/32 1.362-127 1-7/16 X 1-5/8 X 3/32 1.424-128 1-1/2 X 1-11/16 X 3/32 1.487-129 1-9/16 X 1-3/4 X 3/32 1.549-130 1-5/8 X 1-13/16 X 3/32 1.612
-131 1-11/16 X 1-7/8 X 3/32 1.674-132 1-3/4 X 1-15/16 X 3/32 1.737-133 1-13/16 X 2 X 3/32 1.799-134 1-7/8 X 2-1/16 X 3/32 1.862-135 1-15/16 X 2-1/8 X 3/32 1.925
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 41
42
AS568 NOMINAL ACTUALSERIES SIZE
Q-DASHNO. I.D. O.D. C/S I.D.
-102 TO -178 Cross Section Diameters— .103 + .003 inches
-136 2 X 2-3/16 X 3/32 1.987-137 2-1/16 X 2-1/4 X 3/32 2.050-138 2-1/8 X 2-5/16 X 3/32 2.112-139 2-3/16 X 2-3/8 X 3/32 2.175-140 2-1/4 X 2-7/16 X 3/32 2.237
-141 2-5/16 X 2-1/2 X 3/32 2.300-142 2-3/8 X 2-9/16 X 3/32 2.362-143 2-7/16 X 2-5/8 X 3/32 2.425-144 2-1/2 X 2-11/16 X 3/32 2.487-145 2-9/16 X 2-3/4 X 3/32 2.550
-146 2-5/8 X 2-13/16 X 3/32 2.612-147 2-11/16 X 2-7/8 X 3/32 2.675-148 2-3/4 X 2-15/16 X 3/32 2.737-149 2-13/16 X 3 X 3/32 2.800-150 2-7/8 X 3-1/16 X 3/32 2.862
-151 3 X 3-3/16 X 3/32 2.987-152 3-1/4 X 3-7/16 X 3/32 3.237-153 3-1/2 X 3-11/16 X 3/32 3.487-154 3-3/4 X 3-15/16 X 3/32 3.737-155 4 X 4-3/16 X 3/32 3.987
-156 4-1/4 X 4-7/16 X 3/32 4.237-157 4-1/2 X 4-11/16 X 3/32 4.487-158 4-3/4 X 4-15/16 X 3/32 4.737-159 5 X 5-3/16 X 3/32 4.987-160 5-1/4 X 5-7/16 X 3/32 5.237
-161 5-1/2 X 5-11/16 X 3/32 5.487-162 5-3/4 X 5-15/16 X 3/32 5.737-163 6 X 6-3/16 X 3/32 5.987-164 6-1/4 X 6-7/16 X 3/32 6.237-165 6-1/2 X 6-11/16 X 3/32 6.487
-166 6-3/4 X 6-15/16 X 3/32 6.737-167 7 X 7-3/16 X 3/32 6.987-168 7-1/4 X 7-7/16 X 3/32 7.237-169 7-1/2 X 7-11/16 X 3/32 7.487-170 7-3/4 X 7-15/16 X 3/32 7.737
-171 8 X 8-3/16 X 3/32 7.987-172 8-1/4 X 8-7/16 X 3/32 8.237-173 8-1/2 X 8-11/16 X 3/32 8.487-174 8-3/4 X 8-15/16 X 3/32 8.737-175 9 X 9-3/16 X 3/32 8.987
-176 9-1/4 X 9-7/16 X 3/32 9.237-177 9-1/2 X 9-11/16 X 3/32 9.487-178 9-3/4 X 9-15/16 X 3/32 9.737
-201 to -284 Cross Section Diameter - .139 + .004 inches
-201 3/16 X 7/16 X 1/8 .171-202 1/4 X 1/2 X 1/8 .234-203 5/16 X 9/16 X 1/8 .296-204 3/8 X 5/8 X 1/8 .359-205 7/16 X 11/16 X 1/8 .421
-206 1/2 X 3/4 X 1/8 .484-207 9/16 X 1-13/16 X 1/8 .546-208 5/8 X 7/8 X 1/8 .609-209 11/16 X 15/16 X 1/8 .671-210 3/4 X 1 X 1/8 .734
AS568 NOMINAL ACTUALSERIES SIZE
Q-DASHNO. I.D. O.D. C/S I.D.
-201 TO -284 Cross Section Diameters— .139 ± .004 inches
-211 13/16 X 1-1/16 X 1/8 .796-212 7/8 X 1-1/8 X 1/8 .859-213 15/16 X 1-3/16 X 1/8 .921-214 1 X 1-1/4 X 1/8 .984-215 1-1/16 X 1-5/16 X 1/8 1.046
-216 1-1/8 X 1-3/8 X 1/8 1.109-217 1-3/16 X 1-7/16 X 1/8 1.171-218 1-1/4 X 1-1/2 X 1/8 1.234-219 1-5/16 X 1-9/16 X 1/8 1.296-220 1-3/8 X 1-5/8 X 1/8 1.359
-221 1-7/16 X 1-11/16 X 1/8 1.421-222 1-1/2 X 1-3/4 X 1/8 1.609-223 1-5/8 X 1-7/8 X 1/8 1.609-224 1-3/4 X 2 X 1/8 1.734-225 1-7/8 X 2-1/8 X 1/8 1.859
-226 2 X 2-1/4 X 1/8 1.984-227 2-1/8 X 2-3/8 X 1/8 2.109-228 2-1/4 X 2-1/2 X 1/8 2.234-229 2-3/8 X 2-5/8 X 1/8 2.359-230 2-1/2 X 2-3/4 X 1/8 2.484
-231 2-5/8 X 2-7/8 X 1/8 2.609-232 2-3/4 X 3 X 1/8 2.734-233 2-7/8 X 3-1/8 X 1/8 2.859-234 3 X 3-1/4 X 1/8 2.984-235 3-1/8 X 3-3/8 X 1/8 3.109
-236 3-1/4 X 3-1/2 X 1/8 3.234-237 3-3/8 X 3-5/8 X 1/8 3.359-238 3-1/2 X 3-3/4 X 1/8 3.484-239 3-5/8 X 3-7/8 X 1/8 3.609-240 3-3/4 X 4 X 1/8 3.734
-241 3-7/8 X 4-1/8 X 1/8 3.859-242 4 X 4-1/4 X 1/8 3.984-243 4-1/8 X 4-3/8 X 1/8 4.109-244 4-1/4 X 4-1/2 X 1/8 4.234-245 4-3/8 X 4-5/8 X 1/8 4.359
-246 4-1/2 X 4-3/4 X 1/8 4.484-247 4-5/8 X 4-7/8 X 1/8 4.609-248 4-3/4 X 5 X 1/8 4.734-249 4-7/8 X 5-1/8 X 1/8 4.859-250 5 X 5-1/4 X 1/8 4.984
-251 5-1/8 X 5-3/8 X 1/8 5.109-252 5-1/4 X 5-1/2 X 1/8 5.234-253 5-3/8 X 5-5/8 X 1/8 5.359-254 5-1/2 X 5-3/4 X 1/8 5.484-255 5-5/8 X 5-7/8 X 1/8 5.609
-256 5-3/4 X 6 X 1/8 5.734-257 5-7/8 X 6-1/8 X 1/8 5.859-258 6 X 6-1/4 X 1/8 5.984-259 6-1/4 X 6-1/2 X 1/8 6.234-260 6-1/2 X 6-3/4 X 1/8 6.484
-261 6-3/4 X 7 X 1/8 6.734-262 7 X 7-1/4 X 1/8 6.984-263 7-1/4 X 7-1/2 X 1/8 7.234-264 7-1/2 X 7-3/4 X 1/8 7.484-265 7-3/4 X 8 X 1/8 7.734
Q-Ring Sizes and Dimensions (Continued)
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 42
43
AS568 NOMINAL ACTUALSERIES SIZE
Q-DASHNO. I.D. O.D. C/S I.D.
-201 TO -284 Cross Section Diameters— .139 ± .004 inches
-266 8 X 8-1/4 X 1/8 7.984-267 8-1/4 X 8-1/2 X 1/8 8.234-268 8-1/2 X 8-3/4 X 1/8 8.484-269 8-3/4 X 9 X 1/8 8.734-270 9 X 9-1/4 X 1/8 8.984
-271 9-1/4 X 9-1/2 X 1/8 9.234-272 9-1/2 X 9-3/4 X 1/8 9.484-273 9-3/4 X 10 X 1/8 9.734-274 10 X 10-1/4 X 1/8 9.984-275 10-1/2 X 10-3/4 X 1/8 10.484
-276 11 X 11-1/4 X 1/8 10.984-277 11-1/2 X 11-3/4 X 1/8 11.484-278 12 X 12-1/4 X 1/8 11.984-279 13 X 13-1/4 X 1/8 12.984-280 14 X 14-1/4 X 1/8 13.984
-281 15 X 15-1/4 X 1/8 14.984-282 16 X 16-1/4 X 1/8 15.955-283 17 X 17-1/4 X 1/8 16.955-284 18 X 18-1/4 X 1/8 17.955
-309 to -395 Cross Section Diameter -.210 ± .005 inches
-309 7/16 X 13/16 X 3/16 .412-310 1/2 X 7/8 X 3/16 .475
-311 9/16 X 15/16 X 3/16 .537-312 5/8 X 1 X 3/16 .600-313 11/16 X 1-1/16 X 3/16 .662-314 3/4 X 1-1/8 X 3/16 .725-315 13/16 X 1-3/16 X 3/16 .787
-316 7/8 X 1-1/4 X 3/16 .850-317 15/16 X 1-5/16 X 3/16 .850-318 1 X 1-3/8 X 3/16 .975-319 1-1/16 X 1-7/16 X 3/16 1.037-320 1-1/8 X 1-1/2 X 3/16 1.100
-321 1-3/16 X 1-9/16 X 3/16 1.162-322 1-1/4 X 1-5/8 X 3/16 1.225-323 1-5/16 X 1-11/16 X 3/16 1.287-324 1-3/8 X 1-3/4 X 3/16 1.350-325 1-1/2 X 1-7/8 X 3/16 1.475
-326 1-5/8 X 2 X 3/16 1.600-327 1-3/4 X 2-1/8 X 3/16 1.725-328 1-7/8 X 2-1/4 X 3/16 1.850-329 2 X 2-3/8 X 3/16 1.975-330 2-1/8 X 2-1/2 X 3/16 2.100
-331 2-1/4 X 2-5/8 X 3/16 2.225-332 2-3/8 X 2-3/4 X 3/16 2.350-333 2-1/2 X 2-7/8 X 3/16 2.475-334 2-5/8 X 3 X 3/16 2.600-335 2-3/4 X 3-1/8 X 3/16 2.725
-336 2-7/8 X 3-1/4 X 3/16 2.850-337 3 X 3-3/8 X 3/16 2.975-338 3-1/8 X 3-1/2 X 3/16 3.100-339 3-1/4 X 3-5/8 X 3/16 3.225-340 3-3/8 X 3-3/4 X 3/16 3.350
AS568 NOMINAL ACTUALSERIES SIZE
Q-DASHNO. I.D. O.D. C/S I.D.
-309 TO -395 Cross Section Diameters— .210 ± .005inches
-341 3-1/2 X 3-7/8 X 3/16 3.475-342 3-5/8 X 4 X 3/16 3.600-343 3-3/4 X 4-1/8 X 3/16 3.725-344 3-7/8 X 4-1/16 X 3/16 3.850-345 4 X 4-3/8 X 3/16 3.975
-346 4-1/8 X 4-1/2 X 3/16 4.100-347 4-1/4 X 4-5/8 X 3/16 4.225-348 4-3/8 X 4-3/4 X 3/16 4.350-349 4-1/2 X 4-7/8 X 3/16 4.475-350 4-5/8 X 5 X 3/16 4.600
-351 4-3/4 X 5-1/8 X 3/16 4.725-352 4-7/8 X 5-1/4 X 3/16 4.850-353 5 X 5-3/8 X 3/16 4.975-354 5-1/8 X 5-1/2 X 3/16 5.100-355 5-1/4 X 5-5/8 X 3/16 5.225
-356 5-3/8 X 5-3/4 X 3/16 5.350-357 5-1/2 X 5-7/8 X 3/16 5.475-358 5-5/8 X 6 X 3/16 5.600-359 5-3/4 X 6-1/8 X 3/16 5.725-360 5-7/8 X 6-1/4 X 3/16 5.850
-361 6 X 6-3/8 X 3/16 5.975-362 6-1/4 X 6-5/8 X 3/16 6.225-363 6-1/2 X 6-7/8 X 3/16 6.475-364 6-3/4 X 7-1/8 X 3/16 6.725-365 7 X 7-3/8 X 3/16 6.975
-366 7-1/4 X 7-5/8 X 3/16 7.225-367 7-1/2 X 7-7/8 X 3/16 7.475-368 7-3/4 X 8-1/8 X 3/16 7.725-369 8 X 8-3/8 X 3/16 7.975-370 8-1/4 X 8-5/8 X 3/16 8.225
-371 8-1/2 X 8-7/8 X 3/16 8.475-372 8-3/4 X 9-1/8 X 3/16 8.725-373 9 X 9-3/8 X 3/16 8.975-374 9-1/4 X 9-5/8 X 3/16 9.225-375 9-1/2 X 9-7/8 X 3/16 9.475
-376 9-3/4 X 10-1/8 X 3/16 9.725-377 10 X 10-3/8 X 3/16 9.975-378 10-1/2 X 10-7/8 X 3/16 10.475-379 11 X 11-3/8 X 3/16 10.975-380 11-1/2 X 11-7/8 X 3/16 11.475
-381 12 X 12-3/8 X 3/16 11.975-382 13 X 13-3/8 X 3/16 12.975-383 14 X 14-3/8 X 3/16 13.975-384 15 X 15-3/8 X 3/16 14.975-385 16 X 16-3/8 X 3/16 15.955
-386 17 X 17-3/8 X 3/16 16.955-387 18 X 18-3/8 X 3/16 17.955-388 19 X 19-3/8 X 3/16 18.952-389 20 X 20-3/8 X 3/16 19.952-390 21 X 21-3/8 X 3/16 20.952
-391 22 X 22-3/8 X 3/16 21.952-392 23 X 23-3/8 X 3/16 22.940-393 24 X 24-3/8 X 3/16 23.940-394 25 X 25-3/8 X 3/16 24.940-395 26 X 26-3/8 X 3/16 25.940
Q-Ring Sizes and Dimensions (Continued)
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 43
44
AS568 NOMINAL ACTUALSERIES SIZE
Q-DASHNO. I.D. O.D. C/S I.D.
-425 TO -475 Cross Section Diameters— .275 ± .006inches
-425 4-1/2 X 5 X 1/4 4.475-426 4-5/8 X 5-1/8 X 1/4 4.600-427 4-3/4 X 5-1/4 X 1/4 4.725-428 4-7/8 X 5-3/8 X 1/4 4.850-429 5 X 5-1/2 X 1/4 4.975
-430 5-1/8 X 5-5/8 X 1/4 5.100-431 5-1/4 X 5-3/4 X 1/4 5.225-432 5-3/8 X 5-7/8 X 1/4 5.350-433 5-1/2 X 6 X 1/4 5.475-434 5-5/8 X 6-1/8 X 1/4 5.600
-435 5-3/4 X 6-1/4 X 1/4 5.725-436 5-7/8 X 6-3/8 X 1/4 5.850-437 6 X 6-1/2 X 1/4 5.975-438 6-1/4 X 6-3/4 X 1/4 6.225-439 6-1/2 X 7 X 1/4 6.475
-440 6-3/4 X 7-1/4 X 1/4 6.725-441 7 X 7-1/2 X 1/4 6.975-442 7-1/4 X 7-3/4 X 1/4 7.225-443 7-1/2 X 8 X 1/4 7.475-444 7-3/4 X 8-1/4 X 1/4 7.725
-445 8 X 8-1/2 X 1/4 7.975-446 8-1/2 X 9 X 1/4 8.475-447 9 X 9-1/2 X 1/4 8.975-448 9-1/2 X 10 X 1/4 9.475-449 10 X 10-1/2 X 1/4 9.975
Q-Ring Sizes and Dimensions (Continued)
AS568 NOMINAL ACTUALSERIES SIZE
Q-DASHNO. I.D. O.D. C/S I.D.
-425 TO -475 Cross Section Diameters— .275 ± .006inches
-450 10-1/2 X 11 X 1/4 10.475-451 11 X 11-1/2 X 1/4 10.975-452 11-1/2 X 12 X 1/4 11.475-453 12 X 12-1/2 X 1/4 11.975-454 12-1/2 X 13 X 1/4 12.475
-455 13 X 13-1/2 X 1/4 12.975-456 13-1/2 X 14 X 1/4 13.475-457 14 X 14-1/2 X 1/4 13.975-458 14-1/2 X 15 X 1/4 14.475-459 15 X 15-1/2 X 1/4 14.975
-460 15-1/2 X 16 X 1/4 15.475-461 16 X 16-1/2 X 1/4 15.955-462 16-1/2 X 17 X 1/4 16.455-463 17 X 17-1/2 X 1/4 16.955-464 17-1/2 X 18 X 1/4 17.455
-465 18 X 18-1/2 X 1/4 17.955-466 18-1/2 X 19 X 1/4 18.455-467 19 X 19-1/2 X 1/4 18.955-468 19-1/2 X 20 X 1/4 19.455-469 20 X 20-1/2 X 1/4 19.955
-470 21 X 21-1/2 X 1/4 20.955-471 22 X 22-1/2 X 1/4 21.955-472 23 X 23-1/2 X 1/4 22.940-473 24 X 24-1/2 X 1/4 23.940-474 25 X 25-1/2 X 1/4 24.940-475 26 X 26-1/2 X 1/4 25.940
DoYouWant toPlace Orders On-Line?
Go to www.callapg.com to find out how!
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 44
45
TOL. TOL.DASHNO. I.D. ± W ±
8-004 .096 .005 .053 .0038-005 .127 .005 .053 .003
8-006 .140 .005 .053 .0038-007 .171 .005 .053 .0038-008 .202 .005 .053 .0038-009 .234 .005 .053 .0038-010 .265 .005 .053 .003
8-011 .327 .005 .053 .0038-012 .390 .005 .053 .0038-013 .455 .005 .053 .0038-014 .518 .005 .053 .0038-015 .580 .005 .053 .003
8-016 .643 .009 .053 .0038-017 .705 .009 .053 .0038-018 .768 .009 .053 .0038-019 .830 .009 .053 .0038-020 .893 .009 .053 .003
8-021 .955 .009 .053 .0038-022 1.018 .010 .053 .0038-023 1.080 .010 .053 .0038-024 1.143 .010 .053 .0038-025 1.205 .011 .053 .003
8-026 1.268 .011 .053 .0038-027 1.330 .011 .053 .0038-028 1.393 .013 .053 .0038-029 1.518 .013 .053 .0038-030 1.643 .013 .053 .003
8-031 1.768 .015 .053 .0038-032 1.893 .015 .053 .0038-033 2.018 .018 .053 .0038-034 2.143 .018 .053 .0038-035 2.268 .018 .053 .003
8-036 2.393 .018 .053 .0038-037 2.519 .018 .053 .0038-038 2.643 .018 .053 .0038-039 2.768 .020 .053 .0038-040 2.893 .020 .053 .003
8-041 3.018 .024 .053 .0038-042 3.268 .024 .053 .0038-043 3.518 .024 .053 .0038-044 3.768 .027 .053 .0038-045 4.018 .027 .053 .003
8-046 4.268 .030 .053 .0038-047 4.518 .030 .053 .0038-048 4.768 .030 .053 .0038-049 5.018 .037 .053 .0038-050 5.268 .037 .053 .003
Contoured Back-Up Rings - Series 8
DASHNOS. T (REF.) A
– 004 THRU – 050 .049 .045 ± .003– 102 THRU – 178 .053 .045 ± .003– 201 THRU – 284 .050 .040 ± .003– 309 THRU – 395 .076 .060 ± .004– 425 THRU – 475 .117 .096 ± .005
TOL. TOL.DASHNO. I.D. ± W ±
8-102 .077 .005 .086 .0038-103 .109 .005 .086 .0038-104 .140 .005 .086 .0038-105 .171 .005 .086 .0038-106 .202 .005 .086 .003
8-107 .234 .005 .086 .0038-108 .265 .005 .086 .0038-109 .327 .005 .086 .0038-110 .390 .005 .086 .0038-111 .452 .005 .086 .003
8-112 .515 .007 .086 .0038-113 .577 .007 .086 .0038-114 .640 .009 .086 .0038-115 .702 .009 .086 .0038-116 .765 .009 .086 .003
8-117 .831 .010 .086 .0038-118 .893 .010 .086 .0038-119 .956 .010 .086 .0038-120 1.018 .010 .086 .0038-121 1.081 .010 .086 .003
8-122 1.143 .010 .086 .0038-123 1.206 .012 .086 .0038-124 1.268 .012 .086 .0038-125 1.331 .012 .086 .0038-126 1.393 .012 .086 .003
8-127 1.456 .012 .086 .0038-128 1.518 .012 .086 .0038-129 1.581 .015 .086 .0038-130 1.643 .015 .086 .0038-131 1.706 .015 .086 .003
8-132 1.768 .015 .086 .0038-133 1.831 .015 .086 .0038-134 1.893 .015 .086 .0038-135 1.956 .017 .086 .0038-136 2.018 .017 .086 .003
8-137 2.081 .017 .086 .0038-138 2.143 .017 .086 .0038-139 2.206 .017 .086 .0038-140 2.268 .017 .086 .0038-141 2.331 .020 .086 .003
8-142 2.393 .020 .086 .0038-143 2.456 .020 .086 .0038-144 2.518 .020 .086 .0038-145 2.581 .020 .086 .0038-146 2.643 .020 .086 .003
8-147 2.706 .022 .086 .0038-148 2.768 .022 .086 .0038-149 2.831 .022 .086 .0038-150 2.893 .022 .086 .0038-151 3.018 .024 .086 .003
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 45
46
Contoured Back-Up Rings - Series 8 (Continued)
TOL. TOL.DASHNO. I.D. ± W ±
8-152 3.268 .024 .086 .0038-153 3.518 .024 .086 .0038-154 3.768 .028 .086 .0038-155 4.018 .028 .086 .0038-156 4.268 .030 .086 .003
8-157 4.518 .030 .086 .0038-158 4.768 .030 .086 .0038-159 5.018 .035 .086 .0038-160 5.268 .035 .086 .0038-161 5.518 .035 .086 .003
8-162 5.768 .035 .086 .0038-163 6.018 .035 .086 .0038-164 6.268 .040 .086 .0038-165 6.518 .040 .086 .0038-166 6.768 .040 .086 .003
8-167 7.018 .040 .086 .0038-168 7.268 .045 .086 .0038-169 7.518 .045 .086 .0038-170 7.768 .045 .086 .0038-171 8.018 .045 .086 .003
8-172 8.268 .050 .086 .0038-173 8.518 .050 .086 .0038-174 8.768 .050 .086 .0038-175 9.018 .050 .086 .0038-176 9.268 .050 .086 .003
8-177 9.518 .055 .086 .0038-178 9.768 .055 .086 .003
8-201 .202 .005 .118 .0048-202 .265 .005 .118 .0048-203 .327 .005 .118 .0048-204 .390 .005 .118 .0048-205 .455 .005 .118 .004
8-206 .518 .007 .118 .0048-207 .580 .007 .118 .0048-208 .643 .009 .118 .0048-209 .705 .009 .118 .0048-210 .765 .010 .118 .004
8-211 .828 .010 .118 .0048-212 .891 .010 .118 .0048-213 .953 .010 .118 .0048-214 1.016 .010 .118 .0048-215 1.078 .010 .118 .004
8-216 1.141 .012 .118 .0048-217 1.203 .012 .118 .0048-218 1.266 .012 .118 .0048-219 1.334 .012 .118 .0048-220 1.397 .012 .118 .004
8-221 1.459 .012 .118 .0048-222 1.522 .015 .118 .0048-223 1.647 .015 .118 .0048-224 1.772 .015 .118 .0048-225 1.897 .018 .118 .004
8-226 2.022 .018 .118 .0048-227 2.147 .018 .118 .0048-228 2.272 .020 .118 .0048-229 2.397 .020 .118 .0048-230 2.522 .020 .118 .004
8-231 2.631 .020 .118 .0048-232 2.756 .024 .118 .0048-233 2.881 .024 .118 .0048-234 3.006 .024 .118 .0048-235 3.131 .024 .118 .004
TOL. TOL.DASHNO. I.D. ± W ±
8-236 3.256 .024 .118 .0048-237 3.381 .024 .118 .0048-238 3.506 .024 .118 .0048-239 3.631 .028 .118 .0048-240 3.756 .028 .118 .004
8-241 3.881 .028 .118 .0048-242 4.006 .028 .118 .0048-243 4.131 .028 .118 .0048-244 4.256 .030 .118 .0048-245 4.381 .030 .118 .004
8-246 4.506 .030 .118 .0048-247 4.631 .030 .118 .0048-248 4.768 .030 .118 .0048-249 4.893 .035 .118 .0048-250 5.018 .035 .118 .004
8-251 5.143 .035 .118 .0048-252 5.268 .035 .118 .0048-253 5.393 .035 .118 .0048-254 5.518 .035 .118 .0048-255 5.643 .035 .118 .004
8-256 5.768 .035 .118 .0048-257 5.893 .035 .118 .0048-258 6.018 .035 .118 .0048-259 6.268 .040 .118 .0048-260 6.518 .040 .118 .004
8-261 6.768 .040 .118 .0048-262 7.018 .040 .118 .0048-263 7.268 .045 .118 .0048-264 7.518 .045 .118 .0048-265 7.768 .045 .118 .004
8-266 8.018 .045 .118 .0048-267 8.268 .050 .118 .0048-268 8.518 .050 .118 .0048-269 8.768 .050 .118 .0048-270 9.018 .050 .118 .004
8-271 9.268 .055 .118 .0048-272 9.518 .055 .118 .0048-273 9.768 .055 .118 .0048-274 10.018 .055 .118 .0048-275 10.518 .055 .118 .004
8-276 11.018 .065 .118 .0048-277 11.518 .065 .118 .0048-278 12.018 .065 .118 .0048-279 13.018 .065 .118 .0048-280 14.018 .065 .118 .004
8-281 15.018 .065 .118 .0048-282 15.989 .075 .118 .0048-283 16.989 .080 .118 .0048-284 17.989 .085 .118 .004
8-309 .450 .005 .183 .0058-310 .513 .007 .183 .0058-311 .575 .007 .183 .0058-312 .638 .009 .183 .0058-313 .700 .009 .183 .005
8-314 .763 .010 .183 .0058-315 .825 .010 .183 .0058-316 .888 .010 .183 .0058-317 .950 .010 .183 .0058-318 1.013 .010 .183 .005
8-319 1.075 .010 .183 .0058-320 1.138 .012 .183 .0058-321 1.200 .012 .183 .0058-322 1.263 .012 .183 .0058-323 1.316 .012 .183 .005
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 46
47
Contoured Back-Up Rings - Series 8 (Continued)
TOL. TOL.DASHNO. I.D. ± W ±
8-324 1.388 .012 .183 .0058-325 1.513 .015 .183 .0058-326 1.638 .015 .183 .0058-327 1.763 .015 .183 .0058-328 1.888 .015 .183 .005
8-329 2.013 .018 .183 .0058-330 2.138 .018 .183 .0058-331 2.268 .018 .183 .0058-332 2.393 .018 .183 .0058-333 2.518 .020 .183 .005
8-334 2.643 .020 .183 .0058-335 2.768 .020 .183 .0058-336 2.893 .020 .183 .0058-337 3.018 .024 .183 .0058-338 3.143 .024 .183 .005
8-339 3.273 .024 .183 .0058-340 3.398 .024 .183 .0058-341 3.523 .024 .183 .0058-342 3.648 .028 .183 .0058-343 3.773 .028 .183 .005
8-344 3.898 .028 .183 .0058-345 4.028 .028 .183 .0058-346 4.153 .028 .183 .0058-347 4.278 .030 .183 .0058-348 4.403 .030 .183 .005
8-349 4.528 .030 .183 .0058-350 4.653 .030 .183 .0058-351 4.778 .030 .183 .0058-352 4.903 .030 .183 .0058-353 5.028 .037 .183 .005
8-354 5.153 .037 .183 .0058-355 5.278 .037 .183 .0058-356 5.403 .037 .183 .0058-357 5.528 .037 .183 .0058-358 5.653 .037 .183 .005
8-359 5.778 .037 .183 .0058-360 5.903 .037 .183 .0058-361 6.028 .037 .183 .0058-362 6.278 .040 .183 .0058-363 6.528 .040 .183 .005
8-364 6.778 .040 .183 .0058-365 7.028 .040 .183 .0058-366 7.278 .045 .183 .0058-367 7.528 .045 .183 .0058-368 7.778 .045 .183 .005
8-369 8.028 .045 .183 .0058-370 8.278 .050 .183 .0058-371 8.528 .050 .183 .0058-372 8.778 .050 .183 .0058-373 9.028 .050 .183 .005
8-374 9.278 .055 .183 .0058-375 9.528 .055 .183 .0058-376 9.778 .055 .183 .0058-377 10.028 .055 .183 .0058-378 10.528 .060 .183 .005
8-379 11.028 .060 .183 .0058-380 11.528 .065 .183 .0058-381 12.028 .065 .183 .0058-382 13.028 .065 .183 .0058-383 14.028 .070 .183 .005
8-384 15.028 .070 .183 .0058-385 16.008 .075 .183 .0058-386 17.008 .080 .183 .0058-387 18.008 .085 .183 .0058-388 19.006 .090 .183 .005
8-389 20.006 .095 .183 .0058-390 21.006 .095 .183 .0058-391 22.006 .100 .183 .0058-392 22.993 .105 .183 .0058-393 23.993 .110 .183 .005
8-394 24.993 .115 .183 .0058-395 25.993 .120 .183 .005
TOL. TOL.DASHNO. I.D. ± W ±
8-425 4.551 .033 .236 .0068-426 4.676 .033 .236 .0068-427 4.801 .033 .236 .0068-428 4.926 .033 .236 .0068-429 5.051 .037 .236 .006
8-430 5.176 .037 .236 .0068-431 5.301 .037 .236 .0068-432 5.426 .037 .236 .0068-433 5.551 .037 .236 .0068-434 5.676 .037 .236 .006
8-435 5.801 .037 .236 .0068-436 5.926 .037 .236 .0068-437 6.051 .037 .236 .0068-438 6.274 .040 .236 .0068-439 6.525 .040 .236 .006
8-440 6.774 .040 .236 .0068-441 7.024 .040 .236 .0068-442 7.274 .045 .236 .0068-443 7.524 .045 .236 .0068-444 7.774 .045 .236 .006
8-445 8.024 .045 .236 .0068-446 8.524 .055 .236 .0068-447 9.024 .055 .236 .0068-448 9.524 .055 .236 .0068-449 10.024 .055 .236 .006
8-450 10.524 .060 .236 .0068-451 11.024 .060 .236 .0068-452 11.524 .060 .236 .0068-453 12.024 .060 .236 .0068-454 12.524 .060 .236 .006
8-455 13.024 .060 .236 .0068-456 13.524 .070 .236 .0068-457 14.024 .070 .236 .0068-458 14.524 .070 .236 .0068-459 15.024 .070 .236 .006
8-460 15.524 .070 .236 .0068-461 16.004 .075 .236 .0068-462 16.504 .075 .236 .0068-463 17.004 .080 .236 .0068-464 17.504 .085 .236 .006
8-465 18.004 .085 .236 .0068-466 18.504 .085 .236 .0068-467 19.004 .090 .236 .0068-468 19.504 .090 .236 .0068-469 20.004 .096 .236 .006
8-470 21.004 .095 .236 .0068-471 22.004 .100 .236 .0068-472 23.004 .105 .236 .0068-473 24.004 .110 .236 .0068-474 25.004 .115 .236 .006
8-475 26.004 .120 .236 .006
Special Needs?Just ask. We can help!
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 47
48
PTFE SpiralBack-Up Rings
NOMINALAS568
SERIES DASHNO. NO .I.D. O.D. A-DIA. T W Z
2107 -004 5/64 3/16 .078 .019 .0542107 -005 7/64 7/32 .110 .016 .0522107 -006 1/8 1/4 .1252107 -007 5/32 9/32 .1562107 -008 3/16 5/16 .188
.0622107 -009 7/32 11/32 .219 .0322107 -010 1/4 3/8 .2502107 -011 5/16 7/16 .3122107 -012 3/8 1/2 .3752107 -013 7/16 9/16 .437
2107 -014 1/2 5/8 .5002107 -015 9/16 11/16 .562 .0782107 -016 5/8 3/4 .625 .056 .0322107 -017 11/16 13/16 .687 .0542107 -018 3/4 7/8 .750
2107 -019 13/16 15/16 .8122107 -020 7/8 1 .8752107 -021 15/16 1-1/16 .9372107 -022 1 1-1/8 1.000 .029 .0932107 -023 1-1/16 1-3/16 1.062 .025 .047
2107 -024 1-1/8 1-1/4 1.1252107 -025 1-3/16 1-5/16 1.1872107 -026 1-1/4 1-3/8 1.2502107 -027 1-5/16 1-7/16 1.3122107 -028 1-3/8 1-1/2 1.375
2107 -110 3/8 9/16 .3752107 -111 7/16 5/8 .4382107 -112 1/2 11/16 .500 .0782107 -113 9/16 3/4 .562 .0322107 -114 5/8 13/16 .625
2107 -115 11/16 7/8 .6872107 -116 3/4 15/16 .750 .0892107 -117 13/16 1 .812 .0872107 -118 7/8 1-1/16 .8752107 -119 15/16 1-1/8 .937
.0932107 -120 1 1-3/16 1.000 .0472107 -121 1-1/16 1-1/4 1.0622107 -122 1-1/8 1-5/16 1.1252107 -123 1-3/16 1-3/8 1.187
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 48
49
PTFE SpiralBack-Up Rings (Continued)
NOMINALAS568
SERIES DASHNO. NO. I.D. O.D. A-DIA. T W Z
2107 -124 1-1/4 1-7/16 1.2502107 -125 1-5/16 1-1/2 1.3122107 -126 1-3/8 1-9/16 1.375 .0932107 -127 1-7/16 1-5/8 1.437 .0472107 -128 1-1/2 1-11/16 1.500
2107 -129 1-9/16 1-3/4 1.5622107 -130 1-5/8 1-13/16 1.6252107 -131 1-11/16 1-7/8 1.6872107 -132 1-3/4 1-15/16 1.7502107 -133 1-13/16 2 1.812
2107 -134 1-7/8 2-1/16 1.8752107 -135 1-15/16 2-1/8 1.9372107 -136 2 2-3/16 2.000 .0892107 -137 2-1/16 2-1/4 2.062 .0872107 -138 2-1/8 2-5/16 2.125
.1822107 -139 2-3/16 2-3/8 2.187 .0622107 -140 2-1/4 2-7/16 2.2502107 -141 2-5/16 2-1/2 2.3122107 -142 2-3/8 2-9/16 2.3752107 -143 2-7/16 2-5/8 2.437
2107 -144 2-1/2 2-11/16 2.5002107 -145 2-9/16 2-3/4 2.5622107 -146 2-5/8 2-13/16 2.6252107 -147 2-11/16 2-7/8 2.687 .0292107 -148 2-3/4 2-15/16 2.750 .025
2107 -149 2-13/16 3 2.8122107 -210 3/4 1 .7502107 -211 13/16 1-1/16 .8122107 -212 7/8 1-1/8 .8752107 -213 15/16 1-3/16 .938
2107 -214 1 1-1/4 1.0002107 -215 1-1/16 1-5/16 1.062 .122 .0932107 -216 1-1/8 1-3/8 1.125 .120 .0472107 -217 1-3/16 1-7/16 1.1882107 -218 1-1/4 1-1/2 1.250
2107 -219 1-5/16 1-9/16 1.3122107 -220 1-3/8 1-5/8 1.3752107 -221 1-7/16 1-5/8 1.4382107 -222 1-1/2 1-3/4 1.5002107 -223 1-5/8 1-7/8 1.625
2107 -224 1-3/4 2 1.7502107 -225 1-7/8 2-1/8 1.8752107 -226 2 2-1/4 2.0002107 -227 2-1/8 2-3/8 2.1252107 -228 2-1/4 2-1/2 2.250
.121 .2502107 -229 2-3/8 2-5/8 2.375 .119 .0932107 -230 2-1/2 2-3/4 2.5002107 -231 2-5/8 2-7/8 2.6252107 -232 2-3/4 3 2.7502107 -233 2-7/8 3-1/8 2.8752107 -234 3 3-1/4 3.000
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 49
50
PTFE SpiralBack-Up Rings (Continued)
NOMINALAS568
SERIES DASHNO. NO. I.D. O.D. A-DIA. T W Z
2107 -235 3-1/8 3-3/8 3.1252107 -236 3-1/4 3-1/2 3.2502107 -237 3-3/8 3-5/8 3.3752107 -238 3-1/2 3-3/4 3.5002107 -239 3-5/8 3-7/8 3.625
2107 -240 3-3/4 4 3.7502107 -241 3-7/8 4-1/8 3.8752107 -242 4 4-1/4 4.0002107 -243 4-1/8 4-3/8 4.1252107 -244 4-1/4 4-1/2 4.250
2107 -245 4-3/8 4-5/8 4.3752107 -246 4-1/2 4-3/4 4.5002107 -247 4-5/8 4-7/8 4.6252107 -248 4-3/4 5 4.7502107 -249 4-7/8 5-1/8 4.875
2107 -250 5 5-1/4 5.0002107 -251 5-1/8 5-3/8 5.1252107 -252 5-1/4 5-1/2 5.2502107 -253 5-3/8 5-5/8 5.3752107 -254 5-1/2 5-3/4 5.500
.029 .121 .2502107 -255 5-5/8 5-7/8 5.625 .025 .119 .0932107 -256 5-3/4 6 5.7502107 -257 5-7/8 6-1/8 5.8752107 -258 6 6-1/4 6.0002107 -259 6-1/4 6-1/2 6.250
2107 -260 6-1/2 6-3/4 6.5002107 -261 6-3/4 7 6.7502107 -262 7 7-1/4 7.0002107 -263 7-1/4 7-1/2 7.2502107 -264 7-1/2 7-3/4 7.500
2107 -265 7-3/4 8 7.7502107 -266 8 8-1/4 8.0002107 -267 8-1/4 8-1/2 8.2502107 -268 8-1/2 8-3/4 8.5002107 -269 8-3/4 9 8.750
2107 -270 9 9-1/4 9.0002107 -271 9-1/4 9-1/2 9.2502107 -272 9-1/2 9-3/4 9.5002107 -273 9-3/4 10 9.7502107 -274 10 10-1/4 10.000
2107 -325 1-1/2 1-7/8 1.5002107 -326 1-5/8 2 1.6252107 -327 1-3/4 2-1/8 1.7502107 -328 1-7/8 2-1/4 1.8752107 -329 2 2-3/8 2.000
.036 .186 .1882107 -330 2-1/8 2-1/2 2.125 .031 .184 .0622107 -331 2-1/4 2-5/8 2.2502107 -332 2-3/8 2-3/4 2.3752107 -333 2-1/2 2-7/8 2.5002107 -334 2-5/8 3 2.6252107 -335 2-3/4 3-1/8 2.750
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 50
51
PTFE SpiralBack-Up Rings (Continued)
NOMINALAS568
SERIES DASHNO. NO. I.D. O.D. A-DIA. T W Z
2107 -336 2-7/8 3-1/4 2.875 .188/.0622107 -337 3 3-3/8 3.0002107 -338 3-1/8 3-1/2 3.1252107 -339 3-1/4 3-5/8 3.2502107 -340 3-3/8 3-3/4 3.375
2107 -341 3-1/2 3-7/8 3.5002107 -342 3-5/8 4 3.625 .036 .186 .2502107 -343 3-3/4 4-1/8 3.750 .031 .184 .0932107 -344 3-7/8 4-1/4 3.8752107 -345 4 4-3/8 4.000
2107 -346 4-1/8 4-1/2 4.1252107 -347 4-1/4 4-5/8 4.2502107 -348 4-3/8 4-3/4 4.3752107 -349 4-1/2 4-7/8 4.5002107 -425 4-1/2 5 4.500
2107 -426 4-5/8 5-1/8 4.6252107 -427 4-3/4 5-1/4 4.7502107 -428 4-7/8 5-3/8 4.8752107 -429 5 5-1/2 5.0002107 -430 5-1/8 5-5/8 5.125
2107 -431 5-1/4 5-3/4 5.2502107 -432 5-3/8 5-7/8 5.3752107 -433 5-1/2 6 5.5002107 -434 5-5/8 6-1/8 5.6252107 -435 5-3/4 6-1/4 5.750
2107 -436 5-7/8 6-3/8 5.8752107 -437 6 6-1/2 6.0002107 -438 6-1/4 6-3/4 6.2502107 -439 6-1/2 7 6.5002107 -440 6-3/4 7-1/4 6.750
2107 -441 7 7-1/2 7.0002107 -442 7-1/4 7-3/4 7.250 .052 .239 .3122107 -443 7-1/2 8 7.500 .046 .237 .1882107 -444 7-3/4 8-1/4 7.7502107 -445 8 8-1/2 8.000
2107 -446 8-1/2 9 8.5002107 -447 9 9-1/2 9.0002107 -448 9-1/2 10 9.5002107 -449 10 10-1/2 10.0002107 -450 10-1/2 11 10.500
2107 -451 11 11-1/2 11.0002107 -452 11-1/2 12 11.5002107 -453 12 12-1/2 12.0002107 -454 12-1/2 13 12.5002107 -455 13 13-1/2 13.000
2107 -456 13-1/2 14 13.5002107 -457 14 14-1/2 14.0002107 -458 14-1/2 15 14.5002107 -459 15 15-1/2 15.0002107 -460 15-1/2 16 15.500
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 51
52
DASH MNO. DIA. T W G
DASH MNO. DIA. T W G
004 Single Turn .109005 Single Turn .124006 Single Turn .140007 Single Turn .171008 Single Turn .202009 Single Turn .234010 Single Turn .265011 Single Turn .327012 Single Turn .390013 Single Turn .455014 Single Turn .518015 Single Turn .580016 Single Turn .643 ± .001 .052- .054- .005-017 Single Turn .705 .045 .052 .000018 Single Turn .768019 Single Turn .830020 Single Turn .898021 Single Turn .960022 Single Turn 1.023023 Single Turn 1.085024 Single Turn 1.148025 Single Turn 1.210026 Single Turn 1.273027 Single Turn 1.335028 Single Turn 1.398
110 Single Turn .390111 Single Turn .452112 Single Turn .515113 Single Turn .577114 Single Turn .640115 Single Turn .702116 Single Turn .765117 Single Turn .832118 Single Turn .895119 Single Turn .957120 Single Turn 1.020 ± .001 .052- .087- .006-121 Single Turn 1.082 .045 .085 .000122 Single Turn 1.145123 Single Turn 1.207124 Single Turn 1.270125 Single Turn 1.332126 Single Turn 1.397127 Single Turn 1.459128 Single Turn 1.522
PTFE Back-Up Rings
129 Single Turn 1.584130 Single Turn 1.647131 Single Turn 1.709132 Single Turn 1.772133 Single Turn 1.834 ± .001 .052- .087- .006-134 Single Turn 1.897 .045 .085 .000135 Single Turn 1.959136 Single Turn 2.022137 Single Turn 2.084138 Single Turn 2.147139 Single Turn 2.209
140 Solid 2.254141 Solid 2.317142 Solid 2.379143 Solid 2.442144 Solid 2.504 ± .002 .050 .088 N/A145 Solid 2.567 ± .002 ± .001146 Solid 2.629147 Solid 2.692148 Solid 2.754149 Solid 2.817
210 Single Turn .766211 Single Turn .828212 Single Turn .891213 Single Turn .953214 Single Turn 1.016215 Single Turn 1.078 .006-216 Single Turn 1.141 .000217 Single Turn 1.203218 Single Turn 1.266219 Single Turn 1.334220 Single Turn 1.397 ± .001 .052- .120-221 Single Turn 1.459 .045 .118222 Single Turn 1.522223 Single Turn 1.647224 Single Turn 1.772225 Single Turn 1.897226 Single Turn 2.022 .007-227 Single Turn 2.147 .000228 Single Turn 2.272229 Single Turn 2.397230 Single Turn 2.522
NOTE: Single Turn sizes listed are a complete listing of sizes on MS28774. Solid sizes are listed only where MS28774 does not list those sizes in the Single Turnconfiguration.
These Solid sizes are listed on MS27595. For sizes not included here, see “Teflon® Back-Up Rings - Extended Sizes” on page 54. Materialconforms to MIL-R-8791.
Solid Single Turn (Split)
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 52
53
DASH MNO. DIA. T W G
DASH MNO. DIA. T W G
231 Solid 2.630232 Solid 2.755233 Solid 2.880234 Solid 3.005235 Solid 3.130236 Solid 3.255237 Solid 3.380 ± .002 .050 .119 N/A238 Solid 3.505 ± .002 ± .001239 Solid 3.630240 Solid 3.755241 Solid 3.880242 Solid 4.005243 Solid 4.130244 Solid 4.255245 Solid 4.380246 Solid 4.505247 Solid 4.630
325 Single Turn 1.513326 Single Turn 1.638327 Single Turn 1.763328 Single Turn 1.888329 Single Turn 2.013330 Single Turn 2.138331 Single Turn 2.268332 Single Turn 2.393333 Single Turn 2.518334 Single Turn 2.643335 Single Turn 2.768336 Single Turn 2.893337 Single Turn 3.018 ± .001 .075- .184- .007-338 Single Turn 3.143 .065 .182 .000339 Single Turn 3.273340 Single Turn 3.398341 Single Turn 3.523342 Single Turn 3.648343 Single Turn 3.773344 Single Turn 3.898345 Single Turn 4.028346 Single Turn 4.153
347 Single Turn 4.278348 Single Turn 4.403 .075- .184- .007-349 Single Turn 4.528 .065 .182 .000
425 Single Turn 4.551426 Single Turn 4.676427 Single Turn 4.801428 Single Turn 4.926429 Single Turn 5.051430 Single Turn 5.176431 Single Turn 5.301 ± .001 .110- .237- .008-432 Single Turn 5.426 .100 .236 .000433 Single Turn 5.551434 Single Turn 5.676435 Single Turn 5.801436 Single Turn 5.926437 Single Turn 6.051
438 Solid 6.252439 Solid 6.502440 Solid 6.752441 Solid 7.002442 Solid 7.252 ± .002443 Solid 7.502444 Solid 7.752445 Solid 8.002
446 Solid 8.502447 Solid 9.002448 Solid 9.502 ± .003449 Solid 10.002 .108 .236 N/A450 Solid 10.502 ± .002 ± .001
451 Solid 11.002452 Solid 11.502453 Solid 12.002 ± .004454 Solid 12.502455 Solid 13.002
456 Solid 13.502457 Solid 14.002458 Solid 14.502 ± .005459 Solid 15.002460 Solid 15.502
NOTE: Single Turn sizes listed are a complete listing of sizes on MS28774. Solid sizes are listed only where MS28774 does not list those sizes in the Single Turnconfiguration.
These Solid sizes are listed on MS27595. For sizes not included here, see “Teflon® Back-Up Rings - Extended Sizes” on page 54. Materialconforms to MIL-R-8791.
PTFE Back-Up Rings (Continued)
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 53
54
001 1/32 .040- .030+.001002 3/64 .045 .040+.001003 1/16 .047+.001
Dash Numbers 004-028 are listed onMS28774 and/or MS27595
029 1-1/2030 1-5/8031 1-3/4032 1-7/8033 2
034 2-1/8035 2-1/4036 2-3/8037 2-1/2 .052- .054-038 2-5/8 .045 .052
039 2-3/4040 2-7/8041 3042 3-1/4043 3-1/2
044 3-3/4045 4046 4-1/4047 4-1/2048 4-3/4
049 5050 5-1/4
102 1/16103 3/32104 1/8105 5/32 .052- .087-106 3/16 .045 .085
107 7/32108 1/4109 5/16
PTFE Back-Up Rings(Extended Sizes*) (Solid)
*MS28774 and MS27595 do not include all AS-568ADashNumbers. The sizes not included on MS28774 orMS27595 are listed here in a solid configuration.
DASHNO. M T W
Dash Numbers 110-149 are listed onMS28774 and/or MS27595
150 2-7/8151 3152 3-1/4153 3-1/2154 3-3/4
155 4156 4-1/4157 4-1/2158 4-3/4159 5
160 5-1/4161 5-1/2162 5-3/4163 6 .052- .087-164 6-1/4 .045 .085
165 6-1/2166 6-3/4167 7168 7-1/4169 7-1/2
170 7-3/4171 8172 8-1/4173 8-1/2174 8-3/4
175 9176 9-1/4177 9-1/2178 9-3/4
201 3/16202 1/4203 5/16204 3/8 .052- .120-205 7/16 .045 .118
206 1/2207 9/16208 5/8209 11/16
Dash Numbers 210-247 are listed onMS28774 and/or MS27595
248 4-3/4249 4-7/8250 5251 5-1/8252 5-1/4
253 5-3/8254 5-1/2255 5-5/8256 5-3/4257 5-7/8
258 6259 6-1/4260 6-1/2261 6-3/4 .052- .120-262 7 .045 .118
263 7-1/4264 7-1/2265 7-3/4266 8267 8-1/4
268 8-1/2269 8-3/4270 9271 9-1/4272 9-1/2
273 9-3/4274 10275 10-1/2276 11277 11-1/2
278 12279 13280 14281 15282 16
283 17284 18
DASHNO. M T W
DASHNO. M T W
M (NOM.)
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 54
55
DASHNO. M T W
309 7/16310 1/2311 9/16312 5/8313 11/16
314 3/4315 13/16 .075- .184-316 7/8 .065 .182317 15/16318 1
319 1-1/16320 1-1/8321 1-3/16322 1-1/4323 1-5/16
324 1-3/8
Dash Numbers 325-349 are listed onMS28774 and/or MS27595
350 4-5/8351 4-3/4352 4-7/8353 5354 5-1/8
355 5-1/4356 5-3/8357 5-1/2358 5-5/8359 5-3/4
360 5-7/8361 6 .075- .184-362 6-1/4 .065 .182363 6-1/2364 6-3/4
365 7366 7-1/4367 7-1/2368 7-3/4369 8
370 8-1/4371 8-1/2372 8-3/4
PTFE Back-Up Rings(Extended Sizes*) (Solid) (Continued)
DASHNO. M T W
DASHNO. M T W
Dash Numbers 425-460 are listed onMS28774 and/or MS27595
461 16462 16-1/2463 17464 17-1/2465 18
466 18-1/2 .110- .237-467 19 .100 .236468 19-1/2469 20470 21
471 22472 23473 24474 25475 26
373 9374 9-1/4375 9-1/2376 9-3/4377 10
378 10-1/2379 11380 11-1/2381 12382 13
383 14 .075- .184-384 15 .065 .182385 16386 17387 18
388 19389 20390 21391 22392 23
393 24394 25395 26
Have Questions?Please give us a call.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 55
56
Leather Back-Up RingsSeries 6244
(For UseWith Series 6230 “O” Rings)
W
SERIES FORUSEWITH O.D. I.D. + .010 T
6244 – 6230 – 568 – + 1/64” (NOM.) – .005 ± .015
1 1 223 1-7/8 1-5/8 1/8 1/162 2 224 2 1-3/4 1/8 1/163 3 225 2-1/8 1-7/8 1/8 1/164 4 226 2-1/4 2 1/8 1/165 5 227 2-3/8 2-1/8 1/8 1/16
6 6 228 2-1/2 2-1/4 1/8 1/167 7 229 2-5/8 2-3/8 1/8 1/168 8 230 2-3/4 2-1/2 1/8 1/169 9 231 2-7/8 2-5/8 1/8 1/1610 10 232 3 2-3/4 1/8 1/16
11 11 233 3-1/8 2-7/8 1/8 1/1612 12 234 3-1/4 3 1/8 1/1613 13 235 3-3/8 3-1/8 1/8 1/1614 14 236 3-1/2 3-1/4 1/8 1/1615 15 237 3-5/8 3-3/8 1/8 1/16
16 16 238 3-3/4 3-1/2 1/8 1/1617 17 239 3-7/8 3-5/8 1/8 1/1618 18 240 4 3-3/4 1/8 1/1619 19 241 4-1/8 3-7/8 1/8 1/1620 20 242 4-1/4 4 1/8 1/16
21 21 243 4-3/8 4-1/8 1/8 1/1622 22 244 4-1/2 4-1/4 1/8 1/1623 23 245 4-5/8 4-3/8 1/8 1/1624 24 246 4-3/4 4-1/2 1/8 1/1625 25 247 4-7/8 4-5/8 1/8 1/16
26 26 248 5 4-3/4 1/8 1/1627 27 249 5-1/8 4-7/8 1/8 1/1628 28 250 5-1/4 5 1/8 1/1629 29 251 5-3/8 5-1/8 1/8 1/1630 30 252 5-1/2 5-1/4 1/8 1/16
31 31 253 5-5/8 5-3/8 1/8 1/1632 32 254 5-3/4 5-1/2 1/8 1/1633 33 255 5-7/8 5-5/8 1/8 1/1634 34 256 6 5-3/4 1/8 1/1635 35 257 6-1/8 5-7/8 1/8 1/16
36 36 258 6-1/4 6 1/8 1/1637 37 259 6-1/2 6-1/4 1/8 1/1638 38 260 6-3/4 6-1/2 1/8 1/1639 39 261 7 6-3/4 1/8 1/1640 40 262 7-1/4 7 1/8 1/16
41 41 263 7-1/2 7-1/4 1/8 1/1642 42 264 7-3/4 7-1/2 1/8 1/1643 43 265 8 7-3/4 1/8 1/1644 44 266 8-1/4 8 1/8 1/1645 45 267 8-1/2 8-1/4 1/8 1/16
46 46 268 8-3/4 8-1/2 1/8 1/1647 47 269 9 8-3/4 1/8 1/1648 48 270 9-1/4 9 1/8 1/1649 49 271 9-1/2 9-1/4 1/8 1/1650 50 272 9-3/4 9-1/2 1/8 1/16
51 51 273 10 9-3/4 1/8 1/1652 52 274 10-1/4 10 1/8 1/16
All sizes in inches.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:53 PM Page 56
57
15 15 210 1 3/4 .123 .06216 16 211 1-1/16 13/16 .123 .06217 17 212 1-1/8 7/8 .123 .06218 18 213 1-3/16 15/16 .123 .06219 19 214 1-1/4 1 .123 .06220 20 215 1-5/16 1-1/16 .123 .06221 21 216 1-3/8 1-1/8 .123 .06222 22 217 1-7/16 1-3/16 .123 .06223 23 218 1-1/2 1-1/4 .123 .06224 24 219 1-9/16 1-5/16 .123 .06225 25 220 1-5/8 1-3/8 .123 .06226 26 221 1-11/16 1-7/16 .123 .06227 27 222 1-3/4 1-1/2 .123 .06228 28 325 1-7/8 1-1/2 .188 .09429 29 326 2 1-5/8 .188 .09430 30 327 2-1/8 1-3/4 .188 .09431 31 328 2-1/4 1-7/8 .188 .09432 32 329 2-3/8 2 .188 .09433 33 330 2-1/2 2-1/8 .188 .09434 34 331 2-5/8 2-1/4 .188 .09435 35 332 2-3/4 2-3/8 .188 .09436 36 333 2-7/8 2-1/2 .188 .09437 37 334 3 2-5/8 .188 .09438 38 335 3-1/8 2-3/4 .188 .09439 39 336 3-1/4 2-7/8 .188 .09440 40 337 3-3/8 3 .188 .09441 41 338 3-1/2 3-1/8 .188 .09442 42 339 3-5/8 3-1/4 .188 .09443 43 340 3-3/4 3-3/8 .188 .09444 44 341 3-7/8 3-1/2 .188 .09445 45 342 4 3-5/8 .188 .09446 46 343 4-1/8 3-3/4 .188 .09447 47 344 4-1/4 3-7/8 .188 .09448 48 345 4-3/8 4 .188 .09449 49 346 4-1/2 4-1/8 .188 .09450 50 347 4-5/8 4-1/4 .188 .09451 51 348 4-3/4 4-3/8 .188 .09452 52 349 4-7/8 4-1/2 .188 .09453 53 426 5-1/8 4-5/8 .240 .12554 54 427 5-1/4 4-3/4 .240 .12555 55 428 5-3/8 4-7/8 .240 .12556 56 429 5-1/2 5 .240 .12557 57 430 5-5/8 5-1/8 .240 .12558 58 431 5-3/4 5-1/4 .240 .12559 59 432 5-7/8 5-3/8 .240 .12560 60 433 6 5-1/2 .240 .12561 61 434 6-1/8 5-5/8 .240 .12562 62 435 6-1/4 5-3/4 .240 .12563 63 436 6-3/8 5-7/8 .240 .12564 64 437 6-1/2 6 .240 .12565 65 438 6-3/4 6-1/4 .240 .12566 66 439 7 6-1/2 .240 .12567 67 440 7-1/4 6-3/4 .240 .12568 68 441 7-1/2 7 .240 .12569 69 442 7-3/4 7-1/4 .240 .12570 70 443 8 7-1/2 .240 .12571 71 444 8-1/4 7-3/4 .240 .12572 72 445 8-1/2 8 .240 .12573 73 446 9 8-1/2 .240 .12574 74 447 9-1/2 9 .240 .12575 75 448 10 9-1/2 .240 .12576 76 449 10-1/2 10 .240 .12577 77 450 11 10-1/2 .240 .12578 78 451 11-1/2 11 .240 .125
Leather Back-Up RingsSeries 6246
(For UseWith Series 6227 “O” Rings)
All sizes in inches.
SERIES6246— 6227— 568—
O.D.± .007
I.D.(NOM.)
W± .007
T± .015
FORUSEWITH
1 1 006 .250 1/8 .057 .0622 2 007 .281 5/32 .057 .0623 3 008 .312 3/16 .057 .0624 4 009 .344 7/32 .057 .0625 5 010 .375 1/4 .057 .062
6 6 011 .438 5/16 .057 .0627 7 012 .500 3/8 .057 .0628 8 110 .562 3/8 .090 .0629 9 111 .625 7/16 .090 .06210 10 112 .688 1/2 .090 .062
11 11 113 .750 9/16 .090 .06212 12 114 .812 5/8 .090 .06213 13 115 .875 11/16 .090 .06214 14 116 .938 3/4 .090 .062
SERIES6246—
FOR USE WITH6227— 568—
O.D.± 1/64
I.D.(NOM.)
W+ .010 - .005
T± .015
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 57
58
NOMINAL ACTUALDASH SIZE SIZE (INCH)NO. I.D. O.D. I.D. TOL.±
006 1/8 1/4 .114 .005007 5/32 9/32 .145 .005008 3/16 5/16 .176 .005009 7/32 11/32 .208 .005
010 1/4 3/8 .239 .005011 5/16 7/16 .301 .005012 3/8 1/2 .364 .005013 7/16 9/16 .426 .005
014 1/2 5/8 .489 .005015 9/16 11/16 .551 .007016 5/8 3/4 .614 .009017 11/16 13/16 .676 .009
018 3/4 7/8 .739 .009019 1-3/16 15/16 .801 .009020 7/8 1 .864 .009021 15/16 1-1/16 .926 .009
022 1 1-1/8 .989 .010023 1-1/16 1-3/16 1.051 .010024 1-1/8 1-1/4 1.114 .010025 1-3/16 1-5/16 1.176 .011
026 1-1/4 1-3/8 1.239 .011027 1-5/16 1-7/16 1.301 .011028 1-3/8 1-1/2 1.364 .013029 1-1/2 1-5/8 1.489 .013
030 1-5/8 1-3/4 1.614 .013031 1-3/4 1-7/8 1.739 .015032 1-7/8 2 1.864 .015033 2 2-1/8 1.989 .018
034 2-1/8 2-1/4 2.114 .018035 2-1/4 2-3/8 2.239 .018036 2-3/8 2-1/2 2.364 .018037 2-1/2 2-5/8 2.489 .018
038 2-5/8 2-3/4 2.614 .020039 2-3/4 2-7/8 2.739 .020040 2-7/8 3 2.864 .020041 3 3-1/8 2.989 .024
042 3-1/4 3-3/8 3.239 .024043 3-1/2 3-5/8 3.489 .024044 3-3/4 3-7/8 3.739 .027045 4 4-1/4 3.989 .027046 4-1/4 4-3/8 4.239 .030047 4-1/2 4-5/8 4.489 .030
048 4-3/4 4-7/8 4.739 .030049 5 5-1/8 4.989 .037
050 5-1/4 5-3/8 5.239 .037
NOMINAL ACTUALDASH SIZE SIZE (INCH)NO. I.D. O.D. I.D. TOL.±
106 3/16 3/8 .174 .005107 7/32 13/32 .206 .005108 1/4 7/16 .237 .005109 5/16 1/2 .299 .005
110 3/8 9/16 .362 .005111 7/16 5/8 .424 .005112 1/2 11/16 .487 .005113 9/16 3/4 .549 .007
114 5/8 13/16 .612 .009115 11/16 7/8 .674 .009116 3/4 15/16 .737 .009117 13/16 1 .799 .010
118 7/8 1-1/16 .862 .010119 15/16 1-1/8 .924 .010120 1 1-3/16 .987 .010121 1-1/16 1-1/4 1.049 .010
122 1-1/8 1-5/16 1.112 .010123 1-3/16 1-3/8 1.174 .012124 1-1/4 1-7/16 1.237 .012125 1-5/16 1-1/2 1.299 .012
126 1-3/8 1-9/16 1.362 .012127 1-7/16 1-5/8 1.424 .012128 1-1/2 1-11/16 1.487 .012129 1-9/16 1-3/4 1.549 .015
130 1-5/8 1-13/16 1.612 .015131 1-11/16 1-7/8 1.674 .015132 1-3/4 1-15/16 1.737 .015
133 1-13/16 2 1.799.015
134 1-7/8 2-1/16 1.862 .015135 1-15/16 2-1/8 1.925 .017136 2 2-3/16 1.987 .017137 2-1/16 2-1/4 2.050 .017
138 2-1/8 2-5/16 2.112 .017139 2-3/16 2-3/8 2.175 .017140 2-1/4 2-7/16 2.237 .017141 2-5/16 2-1/2 2.300 .020
142 2-3/8 2-9/16 2.362 .020143 2-7/16 2-5/8 2.425 .020144 2-1/2 2-11/16 2.487 .020145 2-9/16 2-3/4 2.550 .020
146 2-5/8 2-13/16 2.612 .020
DASHNO. -106 to -146
NOMINALCROSS SECTION3/32 INCH
DASHNO. -006 to -050
NOMINALCROSS SECTION1/16 INCH
Square Cut Ring Sizes & Dimensions
Gland dimensions on page 59.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 58
59
NOMINAL ACTUALDASH SIZE SIZE (INCH)NO. I.D. O.D. I.D. TOL.±
147 2-11/16 2-7/8 2.675 .022148 2-3/4 2-15/16 2.737 .022149 2-13/16 3 2.800 .022150 2-7/8 3-1/16 2.862 .022
151 3 3-3/16 2.987 .024152 3-1/4 3-7/16 3.237 .024153 3-1/2 3-11/16 3.487 .024154 3-3/4 3-15/16 3.737 .028
155 4 4-3/16 3.987 .028156 4-1/4 4-7/16 4.237 .030157 4-1/2 4-11/16 4.487 .030158 4-3/4 4-15/16 4.737 .030
159 5 5-3/16 4.987 .035160 5-1/4 5-7/16 5.237 .035161 5-1/2 5-11/16 5.487 .035162 5-3/4 5-15/16 5.737 .035
163 6 6-3/16 5.987 .035164 6-1/4 6-7/16 6.237 .040165 6-1/2 6-11/16 6.487 .040166 6-3/4 6-15/16 6.737 .040
167 7 7-3/16 6.987 .040168 7-1/4 7-7/16 7.237 .045169 7-1/2 7-11/16 7.487 .045170 7-3/4 7-15/16 7.737 .045
171 8 8-3/16 7.987 .045172 8-1/4 8-7/16 8.237 .050173 8-1/2 8-11/16 8.487 .050174 8-3/4 8-15/16 8.737 .050
175 9 9-3/16 8.987 .050176 9-1/4 9-7/16 9.237 .055177 9-1/2 9-11/16 9.487 .055178 9-3/4 9-15/16 9.737 .055
DASHNO.-147 to -178 DASHNO.-201 TO -242
NOMINAL NOMINALCROSS SECTION CROSS SECTION3/32 INCH 1/8 INCH
NOMINAL ACTUALDASH SIZE SIZE (INCH)NO. I.D. O.D. I.D. TOL.±
201 3/16 7/16 .171 .005202 1/4 1/2 .234 .005203 5/16 9/16 .296 .005204 3/8 5/8 .359 .005
205 7/16 11/16 .421 .005206 1/2 3/4 .484 .005207 9/16 13/16 .546 .007208 5/8 7/8 .609 .009
209 11/16 15/16 .671 .009210 3/4 1 .734 .010211 13/16 1-1/16 .796 .010212 7/8 1-1/8 .859 .010
213 15/16 1-3/16 .921 .010214 1 1-1/4 .984 .010215 1-1/16 1-5/16 1.046 .010216 1-1/8 1-3/8 1.109 .012
217 1-3/16 1-7/16 1.171 .012218 1-1/4 1-1/2 1.234 .012219 1-5/16 1-9/16 1.296 .012220 1-3/8 1-5/8 1.359 .012
221 1-7/16 1-11/16 1.421 .012222 1-1/2 1-3/4 1.484 .015223 1-5/8 1-7/8 1.609 .015224 1-3/4 2 1.734 .015
225 1-7/8 2-1/8 1.859 .018226 2 2-1/4 1.984 .018227 2-1/8 2-3/8 2.109 .018228 2-1/4 2-1/2 2.234 .020
229 2-3/8 3-5/8 2.359 .020230 2-1/2 2-3/4 2.484 .020231 2-5/8 2-7/8 2.609 .020232 2-3/4 3 2.734 .024
233 2-7/8 3-1/8 2.859 .024234 3 3-1/4 2.984 .024235 3-1/8 3-3/8 3.109 .024236 3-1/4 3-1/2 3.234 .024
237 3-3/8 3-5/8 3.359 .024238 3-1/2 3-3/4 3.484 .024239 3-5/8 3-7/8 3.609 .028240 3-3/4 4 3.734 .028
241 3-7/8 4-1/8 3.859 .028242 4 4-1/4 3.984 .028
DASHNO. WIDTH DEPTH GAP
-006 to -050 .099” ± .005 .057” + .000 .002”- .002
-106 to -146 .146” ± .005 .090” + .000 .0025”- .002
-147 to -178 .146” ±.005 .090” + .000 .0025”- .002
-201 to -242 .193” ±.005 .1225” + .000.003”
- .002-243 to -284 .193” ±.005 .1225” + .000 .003”
-.002-309 to -350 .286” ±.005 .187” +.000 .0035”
-.002-351 to -387 .286” ±.005 .187” +.000.0035”
- .002
Square Cut Ring Sizes & Dimensions (Continued)
Gland Dimensions
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 59
60
NOMINAL ACTUALDASH SIZE SIZE (INCH)NO. I.D. O.D. I.D. TOL.±
243 4-1/8 4-3/8 4.109 .028244 4-1/4 4-1/2 4.234 .030245 4-3/8 4-5/8 4.359 .030246 4-1/2 4-3/4 4.484 .030
247 4-5/8 4-7/8 4.609 .030248 4-3/4 5 4.734 .030249 4-7/8 5-1/8 4.859 .035250 5 5-1/4 4.984 .035
251 5-1/8 5-3/8 5.109 .035252 5-1/4 5-1/2 5.234 .035253 5-3/8 5-5/8 5.359 .035254 5-1/2 5-3/4 5.484 .035
255 5-5/8 5-7/8 5.609 .035256 5-3/4 6 5.734 .035257 5-7/8 6-1/8 5.859 .035258 6 6-1/4 5.984 .035
259 6-1/4 6-1/2 6.234 .040260 6-1/2 6-3/4 6.484 .040261 6-3/4 7 6.734 .040262 7 7-1/4 6.984 .040
263 7-1/4 7-1/2 7.234 .045264 7-1/2 7-3/4 7.484 .045265 7-3/4 8 7.734 .045266 8 8-1/4 7.984 .045
267 8-1/4 8-1/2 8.234 .050268 8-1/2 8-3/4 8.484 .050269 8-3/4 9 8.734 .050270 9 9-1/4 8.894 .050
271 9-1/4 9-1/2 9.234 .055272 9-1/2 9-3/4 9.484 .055273 9-3/4 10 9.734 .055274 10 10-1/4 9.984 .055
275 10-1/2 10-3/4 10.484 .055276 11 11-1/4 10.984 .065277 11-1/2 11-3/4 11.484 .065278 12 12-1/4 11.984 .065
279 13 13-1/4 12.984 .065280 14 14-1/4 13.984 .065281 15 15-1/4 14.984 .065282 16 16-1/4 15.955 .075
283 17 17-1/4 16.955 .080284 18 18-1/4 17.955 .085
DASHNO.-243 to -284 DASHNO.-309 to -350
NOMINAL NOMINALCROSS SECTION CROSS SECTION1/8 INCH 3/16 INCH
Gland dimensions on page 59.
NOMINAL ACTUALDASH SIZE SIZE (INCH)NO. I.D. O.D. I.D. TOL.±
309 7/16 13/16 .412 .005310 1/2 7/8 .475 .005311 9/16 15/16 .537 .007312 5/8 1 .600 .009
313 11/16 1-1/16 .662 .009314 3/4 1-1/8 .725 .010315 13/16 1-3/16 .787 .010316 7/8 1-1/4 .850 .010
317 15/16 1-5/16 .912 .010318 1 1-3/8 .975 .010319 1-1/16 1-7/16 1.037 .010320 1-1/8 1-1/2 1.100 .012
321 1-3/16 1-9/16 1.162 .012322 1-1/4 1-5/8 1.225 .012323 1-5/16 1-11/16 1.287 .012324 1-3/8 1-3/4 1.350 .012
325 1-1/2 1-7/8 1.475 .015326 1-5/8 2 1.600 .015327 1-3/4 2-1/8 1.725 .015328 1-7/8 2-1/4 1.850 .015
329 2 2-3/8 1.975 .018330 2-1/8 2-1/2 2.100 .018331 2-1/4 2-5/8 2.225 .018332 2-3/8 2-3/4 2.350 .018
333 2-1/2 2-7/8 2.475 .020334 2-5/8 3 2.600 .020335 2-3/4 3-1/8 2.725 .020336 2-7/8 3-1/4 2.850 .020
337 3 3-3/8 2.975 .024338 3-1/8 3-1/2 3.100 .024339 3-1/4 3-5/8 3.225 .024340 3-3/8 3-3/4 3.350 .024
341 3-1/2 3-7/8 3.475 .024342 3-5/8 4 3.600 .028343 3-3/4 4-1/8 3.725 .028344 3-7/8 4-1/4 3.850 .028
345 4 4-3/8 3.975 .028346 4-1/8 4-1/2 4.100 .028347 4-1/4 4-5/8 4.225 .030348 4-3/8 4-3/4 4.350 .030
349 4-1/2 4-7/8 4.475 .030350 4-5/8 5 4.600 .030
Square Cut Ring Sizes & Dimensions (Continued)
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 60
61
NOMINAL ACTUALDASH SIZE SIZE (INCH)NO. I.D. O.D. I.D. TOL.±
351 4-3/4 5-1/8 4.725 .030352 4-7/8 5-1/4 4.850 .030353 5 5-3/8 4.975 .037354 5-1/8 5-1/2 5.100 .037
355 5-1/4 5-5/8 5.225 .037356 5-3/8 5-3/4 5.350 .037357 5-1/2 5-7/8 5.475 .037358 5-5/8 6 5.600 .037
359 5-3/4 6-1/8 5.725 .037360 5-7/8 6-1/4 5.850 .037361 6 6-3/8 5.975 .037362 6-1/4 6-5/8 6.225 .040
363 6-1/2 6-7/8 6.475 .040364 6-3/4 7-1/8 6.725 .040365 7 7-3/8 6.975 .040366 7-1/4 7-5/8 7.225 .045367 7-1/2 7-7/8 7.475 .045368 7-3/4 8-1/8 7.725 .045369 8 8-3/8 7.975 .045370 8-1/4 8-5/8 8.225 .050
371 8-1/2 8-7/8 8.475 .050372 8-3/4 9-1/8 8.725 .050373 9 9-3/8 8.975 .050374 9-1/4 9-5/8 9.225 .055
375 9-1/2 9-7/8 9.475 .055376 9-3/4 10-1/8 9.725 .055377 10 10-3/8 9.975 .055378 10-1/2 10-7/8 10.475 .060
379 11 11-3/8 10.975 .060380 11-1/2 11-7/8 11.475 .065381 12 12-3/8 11.975 .065382 13 13-3/8 12.975 .065
383 14 14-3/8 13.975 .070384 15 15-3/8 14.975 .070385 16 16-3/8 15.955 .075386 17 17-3/8 16.955 .075
387 18 18-3/8 17.955 .080
Gland dimensions on page 59.
NOMINAL ACTUALDASH SIZE SIZE (INCH)NO. I.D. O.D. I.D. TOL.±
425 4-1/2 5 4.475 .033426 4-5/8 5-1/8 4.600 .033427 4-3/4 5-1/4 4.725 .033428 4-7/8 5-3/8 4.850 .033
429 5 5-1/2 4.975 .037430 5-1/8 5-5/8 5.100 .037431 5-1/4 5-3/4 5.225 .037432 5-3/8 5-7/8 5.350 .037
433 5-1/2 6 5.475 .037434 5-5/8 6-1/8 5.600 .037435 5-3/4 6-1/4 5.725 .037436 5-7/8 6-3/8 5.850 .037
437 6 6-1/2 5.975 .037438 6-1/4 6-3/4 6.225 .040439 6-1/2 7 6.475 .040440 6-3/4 7-1/4 6.725 .040441 7 7-1/2 6.975 .040442 7-1/4 7-3/4 7.225 .045443 7-1/2 8 7.475 .045444 7-3/4 8-1/4 7.725 .045
445 8 8-1/2 7.975 .045446 8-1/2 9 8.475 .055447 9 9-1/2 8.975 .055448 9-1/2 10 9.475 .055
449 10 10-1/2 9.975 .055450 10-1/2 11 10.475 .060451 11 11-1/2 10.975 .060452 11-1/2 12 11.475 .060
453 12 12-1/2 11.975 .060454 12-1/2 13 12.475 .060455 13 13-1/2 12.975 .060456 13-1/2 14 13.475 .070
457 14 14-1/2 13.975 .070458 14-1/2 15 14.475 .070459 15 15-1/2 14.975 .070460 15-1/2 16 15.475 .070
461 16 16-1/2 15.955 .075462 16-1/2 17 16.455 .075463 17 17-1/2 16.955 .080464 17-1/2 18 17.455 .085
465 18 18-1/2 17.955 .085
DASHNO.-351 to -387 DASHNO.-425 to -465
NOMINAL NOMINALCROSS SECTION CROSS SECTION3/16 INCH 1/4 INCH
Square Cut Ring Sizes & Dimensions (Continued)
6.73 ± .13mm
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 61
62
O-Ring Groove Design Criteria and Installation Data*
SealApplications
All seal applications may be broken down into static (the O-Ring and metal surfaces remain relatively fixed) or dynamic(the O-Ring moves relative to the mating surface).
Static Sealing
Most O-Rings are used in static service. They may be applied as face seals or radial seals. In face seal applications,the O-Ring should seat against the low pressure side of the groove.
Dynamic Sealing
A moving seal may be further classified by the type of motion: reciprocating, oscillating, or rotating. The greatestnumber of dynamic seals are used in reciprocating service in cylinders, valves, and linear actuators. Oscillating motionis encountered in swivels and valve stems. When an O-Ring is used on a rotating shaft, it should be limited to light dutywhere the shaft speed is low and some fluid bypass is acceptable.
In all dynamic applications, proper lubrication and good heat dissipation are essential to long seal life and performance.In pneumatic applications, supplemental lubrication should be provided. Lubricants should be selected on the basis ofthe material of which the O-Ring is made and the type of service to which it will be subjected. (See lubricantdescriptions and applications information on page 71.)
*Complete O-Ring groove design criteria and dimensional data compiled to include all compounds and applicationscan be quite voluminous. The information and data presented in this section is presented only as a basic introduction tothe subject as a general guide for most compounds and applications. It is not intended to address all possible situationsor contingencies. For further information or referral, contact yourAPG representative.
Design standards have been developed for each of the standard O-Ring cross sections and diameters. These arepublished as SAE, MIL-Spec, and company standards. Adherence to the standard design recommendation willguarantee satisfactory seal performance in most instances. Special consideration should be given to the followingareas:
Gland Shape
A basic rectangular groove is generally best. Special groove configurations are sometimes employed but are notrecommended.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 62
63
Squeeze
Initial design squeeze or compression provides for low pressure sealing. Depending on the cross section (CS), asqueeze from 10% to 35% is recommended. Higher percentage squeeze may be tolerated in static seals where frictionand wear are not considerations. In dynamic service, it is often desirable to reduce O-Ring compression to a minimum.As a rule, design squeeze should not fall below 0.010 inch.
Pressure
Up to a certain point, sealing is enhanced by pressure. However, pressure may cause an increase in friction andwear. Above 1500 psi, pressure may cause extrusion and seal failure in a standard gland configuration. An anti-extrusion back-up ring, made of a tough, cut-resistant material such as leather, PTFE, or hard rubber, is suggested.In static applications, it may be possible to modify the gland design to withstand the higher pressures without theaddition of a back-up ring.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 63
64
Surface Finish
The ideal surface finish for dynamic surfaces against which the O-Ring will rub is 5 to 16 µ inch RMS. Rougher andsmoother surfaces may result in increased friction and reduced seal life. Rougher finishes up to 64 µ inch RMS can betolerated in static applications.
Final Specification
End use plays a key role in O-Ring design. Dynamic seals, whether reciprocating, oscillating or rotating motion (or anycombination of these) call for the highest degree of precision in O-Ring design because of the dimensional variationsinvolved. Static applications on the other hand, permit wider tolerances, rougher surface finishes and greater appliedpressure limits without danger of failure.
1. Improper mechanical design - may cause excessive pressure on O-Ring, abrasion from friction (particularlywith dynamic seals), compression set.
2. Fluid attack - chemicals or oils may degrade O-Ring material; high fluid pressure may work O-Ringbeyond its limits, cause extrusion flow.
3. O-Ring design - dimension or cross-section may not be properly matched to the application; material maynot be sufficient to withstand fluids, pressures, dynamic friction abrasion.
4.Temperatures - excessive heat (either from ambient or fluid conditions) can cause degradation; excessive
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 64
65
Gland Dimensional Data(Inches)
.055 .010 15 .002 .093 .138 .205 .005006-012 to to to to to to to to
.057 .018 25 .005 .098 .143 .210 .015
.088 .010 10 .002 .140 .171 .238 .005104-116 to to to to to to to to
.090 .018 17 .005 .145 .176 .243 .015
.121 .012 9 .003 .187 .208 .275 .010201-222 to to to to to to to to
.123 .022 16 .006 .192 .213 .280 .025
.185 .017 8 .003 .281 .311 .410 .020309-349 to to to to to to to to
.188 .030 14 .006 .286 .316 .415 .035
.237 .029 11 .004 .375 .408 .538 .020425-460 to to to to to to to to
.240 .044 16 .007 .380 .413 .543 .035
Reciprocating Seals
GH SQUEEZE D GROOVEWIDTH R
AS 568A GLAND DIAMETRAL NO ONE TWODASH NOS. DEPTH ACTUAL % CLEARANCE BACK-UPS BACK-UP BACK-UPS RADIUS
.050 .015 22 .002 .093 .138 .205 .005004-050 to to to to to to to to
.052 .023 32 .005 .098 .143 .210 .015
.081 .017 17 .002 .140 .171 .238 .005102-178 to to to to to to to to
.083 .025 24 .005 .145 .176 .243 .015
.111 .022 16 .003 .187 .208 .275 .010201-284 to to to to to to to to
.113 .032 23 .006 .192 .213 .280 .025
.170 .032 15 .003 .281 .311 .410 .020309-395 to to to to to to to to
.173 .045 21 .006 .286 .316 .415 .035
.226 .040 15 .004 .375 .408 .538 .020425-475 to to to to to to to to
.229 .055 20 .007 .380 .413 .543 .035
Static Seals
.050 .013 19 .101 .084 .005004-050 to to to to to to
.054 .023 32 .107 .089 .015
.074 .020 20 .136 .120 .005102-178 to to to to to to
.080 .032 30 .142 .125 .015
.101 .028 20 .177 .158 .010201-284 to to to to to to
.107 .042 30 .187 .164 .025
.152 .043 21 .270 .239 .020309-395 to to to to to to
.162 .063 30 .290 .244 .035
.201 .058 21 .342 .309 .020425-475 to to to to to to
.211 .080 29 .362 .314 .035
Face Seals
AS 568ADASHNOS.
XGROOVEDEPTH
SQUEEZE
ACTUAL %
GGROOVEWIDTH
LIQUIDS
VACUUMAND
GASES
R
RADIUS
.065 .012 .075 .005004-045 to 0-11 to to to
.067 .016 .079 .015
.097 .012 .108 .005102-163 to 1-8.5 to to to
.099 .016 .112 .015
.133 .016 .144 .010201-258 to 0-7 to to to
.135 .020 .148 .025
Rotary Seals
AS 568ADASHNOS.
H SQUEEZE
%DIAMETRALCLEARANCE
G
GROOVEWIDTH RADIUS
D R
GLANDDEPTH
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 65
66
Recommended Tolerances(Inches)
Installation Data(Inches)
AS 568A STATIC SEALS RECIPROCATING SEALS ROTARYSEALSDASH ID SEALING ODSEALING ID SEALING ODSEALING ID SEALINGNOS. A B A B A B A B A B
-001 .101 .040 .105 .044-001-1/2 .142 .081 .146 .085-002 .132 .053 .138 .059-003 .162 .067 .172 .077-004 .181 .081 .206 .106 .202 .072-005 .212 .112 .237 .137 .233 .103
-006 .225 .125 .250 .150 .234 .124 .249 .139 .246 .116-007 .256 .156 .281 .181 .265 .155 .280 .170 .277 .147-008 .287 .187 .312 .212 .296 .186 .311 .201 .308 .178-009 .318 .218 .343 .243 .328 .218 .343 .233 .340 .210-010 .350 .250 .375 .275 .359 .249 .374 .264 .371 .241
-011 .412 .312 .437 .337 .421 .311 .436 .326 .433 .303-012 .475 .375 .500 .400 .484 .374 .439 .389 .496 .366-013 .537 .437 .562 .462 .558 .428-014 .600 .500 .625 .525 .621 .491-015 .662 .562 .687 .587 .683 .553
-016 .725 .625 .750 .650 .746 .616-017 .787 .687 .812 .712 .808 .678-018 .850 .750 .875 .775 .871 .741-019 .912 .812 .937 .837 .933 .803-020 .975 .875 1.000 .900 .996 .866
-021 1.037 .937 1.062 .962 1.058 .928-022 1.100 1.000 1.125 1.025 1.121 .991-023 1.162 1.062 1.187 1.087 1.183 1.053-024 1.225 1.125 1.250 1.150 1.246 1.116-025 1.287 1.187 1.312 1.212 1.308 1.178
-026 1.350 1.250 1.375 1.275 1.371 1.241-027 1.412 1.312 1.437 1.337 1.433 1.303-028 1.475 1.375 1.500 1.400 1.496 1.366-029 1.600 1.500 1.625 1.525 1.621 1.491-030 1.725 1.625 1.750 1.650 1.746 1.616
-031 1.850 1.750 1.875 1.775 1.871 1.741-032 1.975 1.875 2.000 1.900 1.996 1.866-033 2.100 2.000 2.125 2.025 2.121 1.991-034 2.225 2.125 2.250 2.150 2.246 2.116-035 2.350 2.250 2.375 2.275 2.371 2.241
-036 2.475 2.375 2.500 2.400 2.496 2.366-037 2.600 2.500 2.625 2.525 2.621 2.491-038 2.725 2.625 2.750 2.650 2.746 2.616-039 2.850 2.750 2.875 2.775 2.871 2.741-040 2.975 2.875 3.000 2.900 2.996 2.865
AS 568ADASHNOS. A B
-004through + .000 + .000-012 - .001 - .001
-013through-050
-120through-178
-201through-284
-309through-395
-425through + .003 + .000-475 - .000 - .003
+ .002 + .000- .000 - .002
Questions?Just ask. We can help!
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 66
67
Installation Data (Continued)(Inches)
AS 568A STATIC SEALS RECIPROCATING SEALS ROTARYSEALSDASH ID SEALING ODSEALING ID SEALING ODSEALING ID SEALINGNOS. A B A B A B A B A B
-041 3.100 3.000 3.125 3.025 3.121 2.991-042 3.350 3.250 3.375 3.275 3.371 3.241-043 3.600 3.500 3.625 3.525 3.621 3.491-044 3.850 3.750 3.875 3.775 3.871 3.741-045 4.100 4.000 4.125 4.025 4.121 3.991
-046 4.350 4.250 4.375 4.275-047 4.600 4.500 4.625 4.525-048 4.850 4.750 4.875 4.775-049 5.100 5.000 5.125 5.025-050 5.350 5.250 5.375 5.275
-102 .224 .062 .249 .087 .237 .061 .249 .073 .245 .051-103 .256 .094 .281 .119 .269 .093 .281 .105 .277 .083-104 .287 .125 .312 .150 .300 .124 .312 .136 .308 .114-105 .318 .156 .343 .181 .331 .155 .343 .167 .339 .145
-106 .349 .187 .374 .212 .362 .186 .374 .198 .370 .176-107 .381 .219 .406 .244 .394 .218 .406 .230 .402 .208-108 .412 .250 .437 .275 .425 .249 .437 .261 .433 .239-109 .474 .312 .499 .337 .487 .311 .499 .323 .495 .301-110 .537 .375 .562 .400 .550 .374 .562 .386 .558 .364
-111 .599 .437 .625 .463 .612 .436 .624 .448 .620 .426-112 .662 .500 .687 .525 .675 .499 .687 .511 .683 .489-113 .724 .562 .750 .588 .737 .561 .749 .573 .745 .551-114 .787 .625 .812 .650 .800 .624 .812 .636 .808 .614-115 .849 .687 .875 .713 .862 .686 .874 .698 .870 .676
-116 .912 .750 .937 .775 .925 .749 .937 .761 .933 .739-117 .974 .812 1.000 .838 .995 .801-118 1.037 .875 1.062 .900 1.058 .864-119 1.099 .937 1.125 .963 1.120 .926-120 1.162 1.000 1.187 1.025 1.183 .989
-121 1.224 1.062 1.250 1.088 1.245 1.051-122 1.287 1.125 1.312 1.150 1.308 1.114-123 1.349 1.187 1.375 1.213 1.370 1.176-124 1.412 1.250 1.437 1.275 1.433 1.239-125 1.474 1.312 1.500 1.338 1.495 1.301
-126 1.537 1.375 1.562 1.400 1.558 1.364-127 1.599 1.437 1.625 1.463 1.620 1.426-128 1.662 1.500 1.687 1.525 1.683 1.489-129 1.724 1.562 1.750 1.588 1.745 1.551-130 1.787 1.625 1.812 1.650 1.808 1.614
-131 1.849 1.687 1.875 1.713 1.870 1.676-132 1.912 1.750 1.937 1.775 1.933 1.739-133 1.974 1.812 2.000 1.838 1.995 1.801-134 2.037 1.875 2.062 1.900 2.058 1.864-135 2.099 1.937 2.125 1.963 2.121 1.927
-136 2.162 2.000 2.187 2.025 2.183 1.989-137 2.224 2.062 2.250 2.088 2.246 2.052-138 2.287 2.125 2.312 2.150 2.308 2.114-139 2.349 2.187 2.375 2.213 2.371 2.177-140 2.412 2.250 2.437 2.275 2.433 2.239
-141 2.474 2.312 2.500 2.338 2.496 2.302-142 2.537 2.375 2.562 2.400 2.558 2.364-143 2.599 2.437 2.625 2.463 2.621 2.427-144 2.662 2.500 2.687 2.525 2.683 2.489-145 2.724 2.562 2.750 2.588 2.746 2.552
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 67
68
Installation Data (Continued)(Inches)
AS 568A STATIC SEALS RECIPROCATING SEALS ROTARYSEALSDASH ID SEALING ODSEALING ID SEALING ODSEALING ID SEALINGNOS. A B A B A B A B A B
-146 2.787 2.625 2.812 2.650 2.808 2.614-147 2.849 2.687 2.875 2.713 2.871 2.677-148 2.912 2.750 2.937 2.775 2.933 2.739-149 2.974 2.812 3.000 2.838 2.996 2.802-150 2.037 2.875 3.062 2.900 3.058 2.864
-151 3.162 3.000 3.187 3.025 3.183 2.989-152 3.412 3.250 3.437 3.275 3.433 3.239-153 3.662 3.500 3.687 3.525 3.683 3.489-154 3.912 3.750 3.937 3.775 3.933 3.739-155 4.162 4.000 4.187 4.025 4.183 3.989
-156 4.412 4.250 4.437 4.275 4.433 4.239-157 4.662 4.500 4.687 4.525 4.683 4.489-158 4.912 4.750 4.937 4.775 4.933 4.739-159 5.162 5.000 5.187 5.025 5.183 4.989-160 5.412 5.250 5.437 5.275 5.433 5.239
-161 5.662 5.500 5.687 5.525 5.683 5.489-162 5.912 5.750 5.937 5.775 5.933 5.739-163 6.162 6.000 6.187 6.025 6.183 5.989-164 6.412 6.250 6.437 6.275-165 6.662 6.500 6.687 6.525
-166 6.912 6.750 6.937 6.775-167 7.162 7.000 7.187 7.025-168 7.412 7.250 7.437 7.275-169 7.662 7.500 7.687 7.525-170 7.912 7.750 7.937 7.775
-171 8.162 8.000 8.187 8.025-172 8.412 8.250 8.437 8.275-173 8.662 8.500 8.687 8.525-174 8.912 8.750 8.937 8.775-175 9.162 9.000 9.187 9.025
-176 9.412 9.250 9.437 9.275-177 9.662 9.500 9.687 9.525-178 9.912 9.750 9.937 9.775
-201 .409 .187 .437 .215 .427 .185 .437 .195 .439 .173-202 .472 .250 .500 .278 .500 .248 .500 .258 .502 .236-203 .534 .312 .562 .340 .562 .310 .562 .320 .564 .298-204 .597 .375 .625 .403 .625 .373 .625 .383 .627 .361-205 .659 .437 .687 .465 .687 .435 .687 .445 .689 .423
-206 .722 .500 .750 .528 .750 .498 .750 .508 .752 .486-207 .784 .562 .812 .590 .812 .560 .812 .570 .814 .548-208 .847 .625 .875 .653 .875 .623 .875 .633 .877 .611-209 .909 .687 .937 .715 .937 .685 .937 .695 .939 .673-210 .972 .750 1.000 .778 .990 .748 1.000 .758 1.002 .736
-211 1.034 .812 1.062 .840 1.052 .810 1.062 .820 1.064 .798-212 1.097 .875 1.125 .903 1.115 .873 1.125 .883 1.127 .861-213 1.159 .937 1.187 .965 1.177 .935 1.187 .945 1.189 .923-214 1.222 1.000 1.250 1.028 1.240 .998 1.250 1.008 1.252 .986-215 1.284 1.062 1.312 1.090 1.302 1.060 1.312 1.070 1.314 1.048
-216 1.347 1.125 1.375 1.153 1.365 1.123 1.375 1.133 1.377 1.111-217 1.409 1.187 1.437 1.215 1.427 1.185 1.437 1.195 1.439 1.173-218 1.472 1.250 1.500 1.278 1.490 1.248 1.500 1.258 1.502 1.236-219 1.534 1.312 1.562 1.340 1.552 1.310 1.562 1.320 1.564 1.298-220 1.597 1.375 1.625 1.403 1.615 1.373 1.625 1.383 1.627 1.361
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 68
69
Installation Data (Continued)(Inches)
AS 568A STATIC SEALS RECIPROCATING SEALS ROTARYSEALSDASH ID SEALING ODSEALING ID SEALING ODSEALING ID SEALINGNOS. A B A B A B A B A B
-221 1.659 1.437 1.687 1.465 1.677 1.435 1.687 1.445 1.689 1.423-222 1.722 1.500 1.750 1.528 1.740 1.498 1.750 1.508 1.752 1.486-223 1.847 1.625 1.875 1.653 1.877 1.611-224 1.972 1.750 2.000 1.778 2.002 1.736-225 2.097 1.875 2.125 1.903 2.127 1.861
-226 2.222 2.000 2.250 2.028 2.252 1.986-227 2.347 2.125 2.375 2.153 2.377 2.111-228 2.472 2.250 2.500 2.278 2.502 2.236-229 2.597 2.375 2.625 2.403 2.627 2.361-230 2.722 2.500 2.750 2.528 2.752 2.486
-231 2.847 2.625 2.875 2.653 2.877 2.611-232 2.972 2.750 3.000 2.778 3.002 2.736-233 3.097 2.875 3.125 2.903 3.127 2.861-234 3.222 3.000 3.250 3.028 3.252 2.986-235 3.347 3.125 3.375 3.153 3.377 3.111
-236 3.472 3.250 3.500 3.278 3.502 3.236-237 3.597 3.375 3.625 3.403 3.627 3.361-238 3.722 3.500 3.750 3.528 3.752 3.486-239 3.847 3.625 3.875 3.653 3.877 3.611-240 3.972 3.750 4.000 3.778 4.002 3.736
-241 4.097 3.875 4.125 3.903 4.127 3.861-242 4.222 4.000 4.250 4.028 4.252 3.986-243 4.347 4.125 4.375 4.153 4.377 4.111-244 4.472 4.250 4.500 4.278 4.502 4.236-245 4.597 4.375 4.625 4.403 4.627 4.361
-246 4.722 4.500 4.750 4.528 4.752 4.486-247 4.847 4.625 4.875 4.653 4.877 4.611-248 4.972 4.750 5.000 4.778 5.002 4.736-249 5.097 4.875 5.125 4.903 5.127 4.861-250 5.222 5.000 5.250 5.028 5.252 4.986
-251 5.347 5.125 5.375 5.153 5.377 5.111-252 5.472 5.250 5.500 5.278 5.502 5.236-253 5.597 5.375 5.625 5.403 5.627 5.361-254 5.722 5.500 5.750 5.528 5.752 5.486-255 5.847 5.625 5.875 5.653 5.877 5.611
-256 5.972 5.750 6.000 5.778 6.002 5.736-257 6.097 5.875 6.125 5.903 6.127 5.861-258 6.222 6.000 6.250 6.028 6.252 5.986-259 6.472 6.250 6.500 6.278-260 6.722 6.500 6.750 6.528
-261 6.972 6.750 7.000 6.778-262 7.222 7.000 7.250 7.028-263 7.472 7.250 7.500 7.278-264 7.722 7.500 7.750 7.528-265 7.972 7.750 8.000 7.778
-266 8.222 8.000 8.250 8.028-267 8.472 8.250 8.500 8.278-268 8.722 8.500 8.750 8.528-269 8.972 8.750 9.000 8.778-270 9.222 9.000 9.250 9.028
-271 9.472 9.250 9.500 9.278-272 9.722 9.500 9.750 9.528-273 9.972 9.750 10.000 9.778-274 10.222 10.000 10.250 10.028-275 10.722 10.500 10.750 10.528
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 69
70
Installation Data (Continued)(Inches)
AS 568A STATIC SEALS RECIPROCATING SEALS ROTARYSEALSDASH ID SEALING ODSEALING ID SEALING ODSEALING ID SEALINGNOS. A B A B A B A B A B
-276 11.222 11.000 11.250 11.028-277 11.722 11.500 11.750 11.528-278 12.222 12.000 12.250 12.028-279 13.222 13.000 13.250 13.028-280 14.222 14.000 14.250 14.028
-281 15.222 15.000 15.250 15.028-282 16.222 16.000 16.250 16.028-283 17.222 17.000 17.250 17.028-284 18.222 18.000 18.250 18.028
-309 .777 .437 .812 .472 .805 .435 .812 .442-310 .840 .500 .875 .535 .868 .498 .875 .505-311 .902 .562 .937 .597 .930 .560 .937 .567-312 .965 .625 1.000 .660 .993 .623 1.000 .630-313 1.027 .687 1.062 .722 1.055 .685 1.062 .692-314 1.090 .750 1.125 .785 1.118 .748 1.125 .755-315 1.152 .812 1.187 .847 1.180 .810 1.187 .817
-316 1.215 .875 1.250 .910 1.243 .873 1.250 .880-317 1.277 .937 1.312 .972 1.305 .935 1.312 .942-318 1.340 1.000 1.375 1.035 1.368 .998 1.375 1.005-319 1.402 1.062 1.437 1.097 1.430 1.060 1.437 1.067-320 1.465 1.125 1.500 1.160 1.493 1.123 1.500 1.130
-321 1.527 1.187 1.562 1.222 1.555 1.185 1.562 1.192-322 1.590 1.250 1.625 1.285 1.618 1.248 1.625 1.255-323 1.652 1.312 1.687 1.347 1.680 1.310 1.687 1.317-324 1.715 1.375 1.750 1.410 1.743 1.373 1.750 1.380-325 1.840 1.500 1.875 1.535 1.868 1.498 1.875 1.505
-326 1.965 1.625 2.000 1.660 1.993 1.623 2.000 1.630-327 2.090 1.750 2.125 1.785 2.118 1.748 2.125 1.755-328 2.215 1.875 2.250 1.910 2.243 1.873 2.250 1.880-329 2.340 2.000 2.375 2.035 2.368 1.998 2.375 2.005-330 2.465 2.125 2.500 2.160 2.493 2.123 2.500 2.130
-331 2.590 2.250 2.625 2.285 2.618 2.248 2.625 2.255-332 2.715 2.375 2.750 2.410 2.743 2.373 2.750 2.380-333 2.840 2.500 2.875 2.535 2.868 2.498 2.875 2.505-334 3.965 2.625 3.000 2.660 2.993 2.623 3.000 2.630-335 3.090 2.750 3.125 2.785 3.118 2.748 3.125 2.755
-336 3.215 2.875 3.250 2.910 3.243 2.873 3.250 2.880-337 3.340 3.000 3.375 3.035 3.368 2.998 3.375 3.005-338 3.465 3.125 3.500 3.160 3.493 3.123 3.500 3.130-339 3.590 3.250 3.625 3.285 3.618 3.248 3.625 3.255-340 3.715 3.375 3.750 3.410 3.743 3.373 3.750 3.380
-341 3.840 3.500 3.875 3.535 3.868 3.498 3.875 3.505-342 3.965 3.625 4.000 3.660 3.993 3.623 4.000 3.630-343 4.090 3.750 4.125 3.785 4.118 3.748 4.125 3.755-344 4.215 3.875 4.250 3.910 4.243 3.873 4.250 3.880-345 4.340 4.000 4.375 4.035 4.368 3.998 4.375 4.005
-346 4.465 4.125 4.500 4.160 4.493 4.123 4.500 4.130-347 4.590 4.250 4.625 4.285 4.618 4.248 4.625 4.255-348 4.715 4.375 4.750 4.410 4.743 4.373 4.750 4.380-349 4.840 4.500 4.875 4.535 4.868 4.498 4.875 4.505-350 4.965 4.625 5.000 4.660
-351 5.090 4.750 5.125 4.785-352 5.215 4.875 5.250 4.910-353 5.340 5.000 5.375 5.035-354 5.465 5.125 5.500 5.160-355 5.590 5.250 5.625 5.285
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 70
71
Installation Data (Continued)(Inches)
AS 568A STATIC SEALS RECIPROCATING SEALS ROTARYSEALSDASH ID SEALING ODSEALING ID SEALING ODSEALING ID SEALINGNOS. A B A B A B A B A B
-356 5.715 5.375 5.750 5.410-357 5.840 5.500 5.875 5.535-358 5.965 5.625 6.000 5.660-359 6.090 5.750 6.125 5.785-360 6.215 5.875 6.250 5.910
-361 6.340 6.000 6.375 6.035-362 6.590 6.250 6.625 6.285-363 6.840 6.500 6.875 6.535-364 7.090 6.750 7.125 6.785-365 7.340 7.000 7.375 7.035
-366 7.590 7.250 7.625 7.285-367 7.840 7.500 7.875 7.535-368 8.090 7.750 8.125 7.785-369 8.340 8.000 8.375 8.035-370 8.590 8.250 8.625 8.285
-371 8.840 8.500 8.875 8.535-372 9.090 8.750 9.125 8.785-373 9.340 9.000 9.375 9.035-374 9.590 9.250 9.625 9.285-375 9.840 9.500 9.875 9.535
-376 10.090 9.750 10.125 9.785-377 10.340 10.000 10.375 10.035-378 10.840 10.500 10.875 10.535-379 11.340 11.000 11.375 11.035-380 11.840 11.500 11.875 11.535
-381 12.340 12.000 12.375 12.035-382 13.340 13.000 13.375 13.035-383 14.340 14.000 14.375 14.035-384 15.340 15.000 15.375 15.035-385 16.340 16.000 16.375 16.035
-386 17.340 17.000 17.375 17.035-387 18.340 18.000 18.375 18.035-388 19.340 19.000 19.375 19.035-389 20.340 20.000 20.375 20.035-390 21.340 21.000 21.375 21.035
-391 22.340 22.000 22.375 22.035-392 23.340 23.000 23.375 23.035-393 24.340 24.000 24.375 24.035-394 25.340 25.000 25.375 25.035-395 26.340 26.000 26.375 26.035
-425 4.952 4.500 5.000 4.584 4.971 4.497 5.002 4.528-426 5.077 4.625 5.125 4.673 5.096 4.622 5.127 4.653-427 5.202 4.750 5.250 4.798 5.221 4.747 5.252 4.778-428 5.327 4.875 5.373 4.923 5.346 4.872 5.377 4.903-429 5.452 5.000 5.500 5.048 5.471 4.997 5.502 5.028-430 5.577 5.125 5.625 5.173 5.596 5.122 5.627 5.153
-431 5.702 5.250 5.750 5.298 5.721 5.247 5.752 5.278-432 5.827 5.375 5.875 5.423 5.846 5.372 5.877 5.403-433 5.952 5.500 6.000 5.548 5.971 5.497 6.002 5.528-434 6.077 5.625 6.125 5.673 6.096 5.622 6.127 5.653-435 6.202 5.750 6.250 5.798 6.221 5.747 6.252 5.778
-436 6.327 5.875 6.375 5.923 6.346 5.872 6.377 5.903-437 6.452 6.000 6.500 6.048 6.471 5.997 6.502 6.028-438 6.702 6.250 6.750 6.298 6.721 6.247 6.752 6.278-439 6.952 6.500 7.000 6.548 6.971 6.497 7.002 6.528-440 7.202 6.750 7.250 6.798 7.221 6.747 7.252 6.778
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 71
72
Installation Data (Continued)(Inches)
AS 568A STATIC SEALS RECIPROCATING SEALS ROTARYSEALSDASH ID SEALING ODSEALING ID SEALING ODSEALING ID SEALINGNOS. A B A B A B A B A B
-441 7.452 7.000 7.500 7.048 7.471 6.997 7.502 7.028-442 7.702 7.250 7.750 7.298 7.721 7.247 7.752 7.278-443 7.952 7.500 8.000 7.548 7.971 7.497 8.002 7.528-444 8.202 7.750 8.250 7.798 8.221 7.747 8.252 7.778-445 8.452 8.000 8.500 8.048 8.471 7.997 8.502 8.028
-446 8.952 8.500 9.000 8.548 8.971 8.497 9.002 8.528-447 9.452 9.000 9.500 9.048 9.471 8.997 9.502 9.028-448 9.952 9.500 10.000 9.548 9.971 9.497 10.002 9.528-449 10.452 10.000 10.500 10.048 10.471 9.997 10.502 10.028-450 10.952 10.500 11.000 10.548 10.971 10.497 11.002 10.528
-451 11.452 11.000 11.500 11.048 11.471 10.997 11.502 11.028-452 11.952 11.500 12.000 11.548 11.971 11.497 12.002 11.528-453 12.452 12.000 12.500 12.048 12.471 11.997 12.502 12.028-454 12.592 12.500 13.000 12.548 12.971 12.497 13.002 12.528-455 13.452 13.000 13.500 13.048 13.471 12.997 13.502 13.028
-456 13.952 13.500 14.000 13.548 13.971 13.497 14.002 13.528-457 14.452 14.000 14.500 14.048 14.471 13.997 14.502 14.028-458 14.952 14.500 15.000 14.548 14.971 14.497 15.002 14.528-459 15.452 15.000 15.500 15.048 15.471 14.997 15.502 15.028-460 15.952 15.500 16.000 15.548 15.971 15.497 16.002 15.528
-461 16.452 16.000 16.500 16.048-462 16.952 16.500 17.000 16.548-463 17.452 17.000 17.500 17.048-464 17.952 17.500 18.000 17.548-465 18.452 18.000 18.500 18.048
-466 18.952 18.500 19.000 18.548-467 19.452 19.000 19.500 19.048-468 19.952 19.500 20.000 19.548-469 20.452 20.000 20.500 20.048-470 21.452 21.000 21.500 21.048
-471 22.452 22.000 22.500 22.048-472 23.452 23.000 23.500 23.048-473 24.452 24.000 24.500 24.048-474 25.452 25.000 25.500 25.048-475 26.452 26.000 26.500 26.048
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 72
73
Installation Data (Millimeters)
Radial Dynamicand StaticSurface roughness:rod/cylinderboreRt=1-4µbase of groove,static Rt =6-16µbase of groove,dynamic Rt=6-10µ
Axial StaticSurfaceroughness:seal contactarea and baseof grooveRt=6-16µpulsatingpressureRt=6-16µ
*Recommendation if the freeswell of theO-Rings is less than10%thegroovewidthcanbeup to15%smaller.
0.40 0.28 0.60 - - 0.28 0.60 - -0.50 0.35 0.70 - - 0.35 0.70 - -0.60 0.45 0.80 - - 0.40 0.80 - -1.00 and 1.02 0.80 1.40 - - 0.65 1.40 0.2 0.21.10,1.12 and 1.15 0.90 1.50 - - 0.75 1.50 0.2 0.21.20 0.95 1.70 - - 0.80 1.70 0.2 0.21.25 and 1.27 1.00 1.80 - - 0.85 1.80 0.2 0.21.30 1.05 1.80 - - 0.90 1.80 0.2 0.21.42 and 1.45 1.15 1.90 - - 0.95 1.90 0.2 0.21.50 and 1.52 1.20 2.10 - - 1.00 2.10 0.2 0.21.57, 1.60 and 1.63 1.30 2.20 - - 1.10 2.20 0.3 0.21.78 and 1.8 1.45 2.40 3.80 5.20 1.20 2.40 0.4 0.21.83 1.50 2.40 3.80 5.20 1.25 2.40 0.5 0.21.90, 1.98, 2.00 and 2.02 1.65 2.50 3.90 5.30 1.40 2.50 0.5 0.22.08 and 2.1 1.70 2.80 4.20 5.60 1.45 2.80 0.5 0.22.20 and 2.21 1.85 2.90 4.30 5.70 1.55 2.90 0.5 0.32.26 1.85 3.00 4.40 5.80 1.55 3.00 0.5 0.32.30 1.90 3.00 4.40 5.80 1.60 3.00 0.5 0.32.40 2.00 3.20 4.60 6.00 1.70 3.20 0.5 0.32.46 2.05 3.30 4.70 6.10 1.75 3.30 0.5 0.32.50 2.10 3.40 4.80 6.20 1.80 3.40 0.5 0.32.60, 2.62 and 2.70 2.25 3.60 5.00 6.40 1.90 3.60 0.6 0.32.70 and 2.75 2.30 3.70 5.10 6.50 1.95 3.70 0.6 0.32.95 and 3.00 2.50 3.90 5.30 6.70 2.20 3.90 0.8 0.33.15 2.70 4.00 5.40 6.80 2.30 4.00 0.8 0.43.50, 3.53 and 3.60 3.10 4.80 6.20 7.60 2.70 4.80 1.0 0.44.00 3.50 5.40 7.10 8.80 3.10 5.40 1.0 0.44.50 4.00 6.00 7.70 9.40 3.40 6.00 1.0 0.45.00 4.30 6.70 8.40 10.10 3.90 6.70 1.0 0.45.33 4.70 7.10 8.80 10.50 4.30 7.10 1.2 0.65.50 4.80 7.30 9.00 10.70 4.40 7.30 1.2 0.65.70 and 5.80 5.00 7.70 9.40 11.10 4.60 7.70 1.2 0.66.00 5.30 8.20 9.90 11.60 4.80 8.20 1.2 0.66.30 and 6.35 5.60 8.70 10.40 12.10 5.10 8.70 1.2 0.66.50 5.70 8.90 10.60 12.30 5.40 8.90 1.2 0.67.00 6.10 9.50 12.00 14.50 5.80 9.50 1.5 0.67.20 6.20 9.80 12.30 14.80 5.90 9.80 1.5 0.67.50 6.50 10.40 12.90 15.40 6.20 10.40 1.5 0.68.00 7.00 11.00 13.50 16.00 6.60 11.00 1.5 0.68.20 7.10 11.20 13.70 16.20 6.70 11.20 1.5 0.68.40 7.50 11.70 14.20 16.70 6.90 11.70 2.0 0.69.00 7.80 12.50 15.00 17.50 7.40 12.50 2.0 0.69.50 8.30 13.30 15.80 18.30 7.80 13.30 2.0 0.610.00 8.70 13.50 16.00 18.50 8.30 13.50 2.0 0.611.00 9.60 15.50 18.00 20.50 9.10 15.50 3.0 0.612.00 10.50 16.80 19.30 21.80 10.30 16.80 3.0 0.614.00 12.20 19.00 21.50 24.00 11.60 19.00 3.0 0.615.00 13.20 20.00 22.50 25.00 12.50 20.00 3.0 0.616.00 14.00 21.50 24.00 26.50 13.50 21.50 3.0 0.6
O-RingCross Section
RadialDynamicandStatic Axial StaticOnly Radius
GrooveWidth*GROOVE F1+0.2 F2+0.2 GROOVE GROOVE RDEPTH F+0.2 1 2 DEPTH WIDTH* WITHOUT WITHE+0.06 BACKRING BACKRING E1 F3 BACKRING BACKRING
TOL.+0.06 TOL.+0.2 TOL.+0.2 TOL.+0.2 TOL.+0.1 TOL.+0.2
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:54 PM Page 73
74
*Type B - H70K Nitrile 70 Durometer †European Kits - M70KMetric Nitrile 70 DurometerH90K Nitrile 90 DurometerV70K Fluoroelastomer (Black) 75 Durometer MV75KMetric Fluoroelastomer (Black) 75 DurometerVB75K Fluoroelastomer (Brown) 75 DurometerV90K Fluoroelastomer (Black) 90 DurometerVB90K Fluoroelastomer (Brown) 90 DurometerS70K Silicone 70 DurometerA80K Aflas® 80 Durometer ††Japanese Kits - M7OKJMetric Nitrile 70 DurometerN70K Chloroprene 70 DurometerE70K EPR 70 Durometer M90KJMetric Nitrile 90 Durometer
QH70K Nitrile Q-Rings 70 DurometerU90K Urethane 90 DurometerSH70K Nitrile Square Cut Rings 70 Durometer
**TypeA - TFEK PTFE
***ContouredHB90K Nitrile 90 DurometerBack-upRings
Kits are ready to use in compact, self-contained,cases. The most popular standard and metric sizesare available in several different compounds. Thecharts below indicate available configurations.
O-Ring Kits
Kits
STANDARDKITS METRIC KITSNUMBEROF PIECES EUROPEANASSORTMENT† JAPANESEASSORTMENT††
SIZE TYPE B* TYPEA** CONTOURED SIZE NO. OF PIECES SIZE NO. OF PIECES(382 Total) (380 Total) BACK-UP-RINGS*** (385 Total) (396 Total)
006 20 16 26 2.00 x 3.00 16 1.90 x 2.80 20007 20 16 26 2.00 x 4.00 16 1.90 x 3.80 20008 20 16 26 2.00 x 5.00 16 1.90 x 4.80 18009 20 16 26 2.00 x 6.00 16 1.90 x 5.80 18010 20 16 26 2.00 x 7.00 16 1.90 x 6.80 18011 20 16 26 2.00 x 8.00 16 1.90 x 7.80 18012 20 16 26 2.00 x 10.00 16 1.90 x 8.80 18110 13 16 26 2.50 x 10.00 13 2.40 x 9.80 14111 13 16 26 2.50 x 11.00 13 2.40 x 10.80 14112 13 16 26 2.50 x 12.00 13 2.40 x 11.80 14113 13 16 26 2.50 x 14.00 13 2.40 x 13.80 14114 13 16 26 2.50 x 16.00 13 2.40 x 15.80 14115 13 16 26 2.50 x 17.00 13 2.40 x 17.80 14116 13 16 26 2.50 x 19.00 13 2.40 x 19.80 13210 10 12 26 3.00 x 19.00 11 3.00 x 20.00 11211 10 12 26 3.00 x 20.00 12 3.00 x 22.00 12212 10 12 26 3.00 x 22.00 12 3.10 x 24.40 12213 10 12 26 3.00 x 24.00 12 3.10 x 29.40 11214 10 12 26 3.00 x 25.00 12 3.10 x 34.40 11215 10 12 26 3.00 x 27.00 12 3.10 x 39.40 11216 10 12 26 3.00 x 28.00 12 3.10 x 44.40 11217 10 12 26 3.00 x 30.00 12 3.50 x 22.10 10218 10 12 26 3.00 x 32.00 12 3.50 x 24.70 10219 10 12 26 3.00 x 33.00 12 3.50 x 25.70 10220 10 7 26 3.00 x 35.00 12 3.50 x 29.70 10221 10 7 26 3.00 x 36.00 12 3.50 x 31.70 10222 10 7 26 3.00 x 38.00 12 3.50 x 33.70 10325 7 5 18 4.00 x 38.00 9 3.50 x 35.70 10326 7 5 18 4.00 x 41.00 9 3.50 x 39.70 10327 7 5 18 4.00 x 44.00 9 3.50 x 47.70 10
CONTOUREDBACK-UP RINGS ***
(756 TOTAL)
HYDRAULIC FITTINGKIT*
NO. OFSIZE PIECES
(620 TOTAL)
011 30012 30014 30016 30018 30021 30025 30029 30210 20214 20219 20222 20225 10228 10232 10904 30905 30906 30908 30910 30912 30914 30916 30920 10924 10932 10
H90KHYDKITNitrile90 Durometer
VB90KHYDKITFluoroelastomer90 Durometer
* Combines 3 popularHydraulic Fitting Kits:ORS Flat Face, Boss,and Split Flange.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 74
75
901 10 901 -902 10 902 25903 10 903 25904 10 904 25905 12 905 25906 12 906 25907 12 907 -908 12 908 20909 12 909 -910 12 910 20911 10 911 -912 10 912 15913 10 913 -914 10 914 15916 10 916 15918 10 918 -920 10 920 15924 10 924 15928 10 928 -932 10 932 -
210 8 10
212 10 10
214 12 10
219 16 15
222 20 15
225 24 15
228 32 8
232 40 6
237 48 6
NO. OFPIECES
(212 TOTAL)
NO. OFPIECES
(240 TOTAL)
BOSS KITS20 SIZES 12 SIZES
SIZE SIZE
SPLIT FLANGE KITS*
FLANGESIZE SIZE
H90KB0SS H90KBOSS12Nitrile Nitrile90 Durometer 90 Durometer
VB90KBOSS VB90KBOSS12Fluoroelastomer (Brown) Fluoroelastomer (Brown)90 Durometer 90 Durometer
NO. OFPIECES
(95 TOTAL)
H90STAPLOKNitrile90 Durometer
H90MBSPNitrile90 Durometer
H90KFLANGE VB90KFLANGENitrile Fluoroelastomer (Brown)90 Durometer 90 Durometer
* For Split Flange Type Hydraulic Hose Fittings. * For ORS Hydraulic Hose Fittings. * For Male 37 JIC to Male Metric Straight Thread Elbow Fittings.
011 4 25
012 6 25
014 8 25
016 10 25
018 12 25
021 16 25
025 20 15
029 24 10
FLAT FACE KITS*
TUBESIZE SIZE
NO. OFPIECES
(175 TOTAL)
1.60 X 8.10 10 20
2.40 X 9.30 12 20
2.00 X 11.50 14 20
2.40 X 15.60 18 10
909 20 10
2.40 X 19.80 22 10
912 27 10
916 33 10
3.00 X 39.20 42 5
MALESTRAIGHTTHREADELBOWKIT*
TUBESIZE SIZE
NO. OFPIECES
(35 TOTAL)
H90KFACE VB90KFACENitrile Fluoroelastomer (Brown)90 Durometer 90 Durometer
2.00 X 6.00 04 20
2.00 X 10.00 06 20
2.50 X 13.00 08 20
2.50 X 19.00 12 10
2.50 X 25.00 16 10
2.50 X 33.00 20 10
3.00 X 40.00 24 10
3.00 X 50.00 32 5
STAPLOK KIT
DASHSIZE SIZE
NO. OFPIECES
(105 TOTAL)
010 2 20
111 4 20
113 6 20
2.62 X 17.86 8 10
2.26 X 20.63 10 10
119 12 10
217 16 10
222 20 5
BSP FITTING KIT
TUBESIZE SIZE
NO. OFPIECES
(105 TOTAL)
H90MSTRAIGHTNitrile90 Durometer
O-Ring Kits (continued)
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 75
76
O-Ring Kits (continued)
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
011 50 CHLOROPRENE
011 50 HNBR (Green)
013 50 CHLOROPRENE
013 50 HNBR (Green)
015 25 CHLOROPRENE
015 25 HNBR (Green)
017 25 CHLOROPRENE
017 25 HNBR (Green)
008 50 GREEN
011 50 BLUE
011 50 GREEN
013 50 BLUE
013 50 GREEN
015 25 BLUE
015 25 GREEN
017 25 BLUE
017 25 GREEN
108 50 BLUE
110 50 BLUE
112 30 BLUE
NO. OFPIECES
(300 TOTAL)
NO. OFPIECES
(480 TOTAL)
TRUCK REFRIGERATION KIT
SIZE MATERIAL
R134A AUTO A/C KIT*
STYLESIZE (COLOR)
HS/N70K Chloroprene 70 Durometer/Green HNBR 70 Durometer
HS/HST70K HNBR (HSN)Green & Blue TFE Coated
* Required for Refrigerant R134A. Can also be used for R12.
010 35
011 35
012 25
110 25
111 15
112 10
113 10
114 10
115 10
116 10
211 8
212 7
PLUMBING KIT
NUMBEROF PIECESSIZE (200 TOTAL)
H70PKNitrile 70 Durometer
– 10 10
– 1/4 10
– 5/16 10
– 3/8 10
– 1/2 10
– 5/8 10
– 3/4 10
THREAD SEAL KIT7500 Series 70 Durometer Nitrile and
Commercial CAD Plated Steel
NUMBEROF PIECESSIZE (200 TOTAL)
ATS7500-KITNitrile 70 Durometerwith CommercialCAD Plated Steel
NU6226-84-KITNitrile 70 and 80 Durometer
NU6226-8 10 NU8404-0056 10
NU6226-14 10 NU8404-0062 10
NU6226-16 6 NU8404-0075 10
NU6226-18 6 NU8404-0087 10
NU6226-20 4 NU8404-0100 10
NU6226-22 4 NU8404-0118 10
NU6226-43 10
NU6226-44 10
NU6226-45 10
NU6226-47 10
NU6226-49 10
NU6226-51 6
U-CUP KIT(156 TOTALPIECES)
NUMBER NUMBEROF OF
626 SERIES PIECES 8400 SERIES PIECES
PART NUMBER / SIZE (96 TOTAL) PART NUMBER / SIZE (60 TOTAL)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 76
77
WAREHOUSEKITS*STANDARDKITS METRIC KITS
NO. OFNO. OF
NO. OFNO. OFPIECES PIECES
SIZE (1326 Total) SIZE PIECES SIZE (1465 Total) SIZE PIECES
O-Ring Kits (continued)
006 50 211 15007 50 212 15008 50 213 15009 50 214 15010 50 215 15011 50 216 10012 50 217 10013 50 218 10014 50 219 10015 30 220 10016 30 221 10017 30 222 10018 30 223 10019 30 224 10020 30 320 6021 25 321 6022 25 322 6023 25 323 6024 25 324 6025 25 325 6110 30 326 6111 30 327 6112 30 328 6113 30 329 6114 30 330 6115 30 425 3116 15 426 3117 15 427 3118 15 428 3119 15 O-RINGCORD120 15 DIAMETER LENGTH121 15 0.070” 7’122 15 0.103” 7’123 15 0.139” 7’124 15 0.210” 7’210 15 0.275” 7’
1.50 X 5.00 50 2.50 X 25.00 101.50 X 6.00 50 3.00 X 9.00 101.50 X 7.00 50 3.00 X 12.00 101.50 X 8.00 50 3.00 X 14.00 101.50 X 9.00 50 3.00 X 15.00 101.50 X 10.00 50 3.00 X 16.00 101.50 X 12.00 50 3.00 X 18.00 101.50 X 14.00 50 3.00 X 19.00 102.00 X 4.00 50 3.00 X 20.00 102.00 X 5.00 50 3.00 X 22.00 102.00 X 6.00 50 3.00 X 24.00 102.00 X 7.00 50 3.00 X 25.00 102.00 X 8.00 50 3.00 X 27.00 102.00 X 9.00 50 3.00 X 28.00 102.00 X 10.00 50 3.00 X 30.00 102.00 X 11.00 50 3.00 X 32.00 102.00 X 12.00 50 3.00 X 33.00 102.00 X 13.00 25 3.00 X 34.00 102.00 X 14.00 25 3.00 X 35.00 102.00 X 15.00 25 3.00 X 36.00 102.00 X 16.00 25 3.00 X 38.00 102.00 X 17.00 25 3.00 X 44.00 102.00 X 18.00 25 3.00 X 45.00 102.00 X 20.00 10 3.00 X 54.00 102.00 X 22.00 10 4.00 X 38.00 102.00 X 30.00 10 4.00 X 41.00 102.00 X 40.00 10 4.00 X 44.00 102.50 X 10.00 25 O-RINGCORD2.50 X 11.00 25 DIAMETER LENGTH2.50 X 12.00 25 1.50 mm1 1meter2.50 X 13.00 10 2.00 mm 1meter2.50 X 14.00 10 2.50 mm 1meter2.50 X 15.00 10 3.00 mm 1meter2.50 X 16.00 10 3.50 mm 1meter2.50 X 17.00 10 4.00 mm 1meter2.50 X 18.00 10 5.00 mm 1meter2.50 X 19.00 10 5.70 mm 1meter2.50 X 22.00 10 8.40 mm2 1meter
H70KW Nitrile 70 DurometerV70KW Fluoroelastomer 75 Durometer
1 1.60 in MV70KW2 8.00 in MV70KW
* Each kit is contained in a 38-drawer storage box with the o-rings and cord stock as listed above,plus two o-ring picks, razor blade, cutting and splicing jig, and rapidset adhesive.
M70KW Metric Nitrile 70 DurometerMV70KW Metric Fluoroelastomer 75 Durometer
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 77
78
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
SPLICINGKIT CORDCONTENTS
PART CORDNUMBER COMPOUND DIAMETER LENGTH
.103” 7 ft.ORSKB Buna-N(Inches) .139” 7 ft.ORSKV Viton® .210” 7 ft.
.275” 7 ft.
1.50mm 1meter2.00mm 1meter2.50mm 1meter3.00mm 1meter
ORSKMB Buna-N(Metric) 3.50mm 1meter4.00mm 1meter5.00mm 1meter5.70mm 1meter8.40mm 1meter
O-Ring Splicing Kits
O-Ring Kits (continued)
Contains every-thing necessary formaking on-the-jobcustomO-Rings.Eliminates waitingand down time.Each kit includesrazor blade, cuttingand splicing jig, rapid-set adhesive, and cordstock as listed in the chart.
CONTOUREDBACKUPRINGKITS Q-RINGKITS
NO. OF PIECES NO. OF PIECESSIZE (295 TOTAL) SIZE (295 TOTAL)
005 10 005 10006 10 006 10007 10 007 10008 10 008 10009 10 009 10010 10 010 10011 10 011 10012 10 012 10013 10 013 6014 10 014 6015 10 015 6016 10 016 6017 10 017 5018 10 018 5110 12 110 6112 12 112 6113 9 113 6114 9 114 6115 9 115 6116 9 116 6117 5 117 4118 5 118 4119 5 119 4120 5 120 4121 5 121 4210 7 210 5211 7 211 5212 7 212 5213 7 213 5214 5 214 5215 5 215 5216 5 216 5217 5 217 5218 5 218 5219 5 219 5
STANDARDNITRILE/FLUOROELASTOMERCOMBOWAREHOUSEKIT
1168 TOTALPIECESNITRILE FLUORELASTOMER
NO. OF PIECES NO. OF PIECESSIZE (584 TOTAL) (584 TOTAL)
006 65 65007 65 65009 65 65010 65 65011 65 65012 65 65013 12 12014 12 12015 12 12016 12 12210 9 9211 9 9212 9 9213 9 9214 9 9
HB90K Nitrile 90 Durometer QH70K Nitrile Q-Rings 70 Durometer
H70/V70 COMBONitrile 70 DurometerFluoroelastomer 75 Durometer (Black)
H70/VB75COMBONitrile 70 DurometerFluoroelastomer 75 Durometer (Brown)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/28/11 10:46 AM Page 78
79
Vulcanizing
As described in the preceding pages of this catalog,APG has one
of the largest inventories of O-Rings in North America. This
inventory consists of “standard” sizes manu-factured to the
dimensions outlined throughout this catalog. There is, however,
a very large and growing demand for “non-standard” O-Ring
sizes that must be custom fabricated. APG meets this demand
with the extensive capabilities of our vulcanizing department.
These non-standard O-Ring sizes are fabricated to the exact specifications of our customers from the cord stock described in the
following pages. APG maintains large inventories of these stock materials so that O-Rings can be fabricated quickly and shipped
instantly. We also vulcanize extrusions which are described after the cord stock items. Non-stock materials and sizes are also
available by special order.
In addition, we vulcanize gaskets which are too large to be cut in
one piece. These are cut in sections and vulcanized to
accommodate virtually any requirement. Rubber sleeves and
other custom products are also routinely vulcanized by the
experienced personnel in this highly capable department atAPG.
Non-Standard Requirements?Our Vulcanizing Department can help!
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 79
80
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
When designing endless splices for extruded profiles, severalfactors must be considered: compound durometer, cut length,size of cross section, and (in the case of tubing) wall thickness.
Mold cavities are normally designed to the nominal dimension. Ifthe extrusion cross section is at its upper tolerance limit, moldpressure marks will be visible on the surface. This phenomenonis accentuated with the use of lower durometer compounds. Ifthe extrusion cross section is at its lower tolerance limit, the mold
cavity would have to be shimmed in order to attain the splicingpressure necessary to create surface marking. The potential forsize differences at each end of a cut length increases with thelength of the cut. (One end may be at the upper tolerance limit,and the other end may be at the lower tolerance limit.)Generally, this gives the appearance of a step or mismatch. Theillustration below illustrates the phenomena of mold pressuremarks and apparent mismatches.
Standards for Spliced Extrusions
The manufacture of extrusions in circular or rectangular shapedgaskets, or a combination of both can be accomplished bymeans of butt or beveled vulcanized splices. The splice isusually never as strong as the original material from which thegasket is made. The stronger the splice is required to be, themore difficult the labor operations. A pressure mark will appearat the splice area due to the required holding pressure in themold.
The method of testing splices should be given seriousconsideration. Doubling over, pinching, twisting, or bendingback a splice are not proper methods of testing. Splice strengthvaries with the configuration of the cross section of the extrusion.For this reason, splice strength is very difficult to define.
Pulling perpendicular to the plane of the splice is a sufficient testin the testing of a splice. The gasket should be clamped in sucha way that the pull is evenly distributed over the splice.
Tolerances must be allowed in the length between splices.These tolerances must be varied according to length betweensplices and due to the method of making the splice. Tolerancesfor commercial class splices are listed in the following table.These tolerances are applicable for both conventional splicesand injection splices.
Spliced Length TolerancesRMADrawing Designation Class 2 (Commercial)
INCHES MILLIMETERS
CUT LENGTH TOLERANCE CUT LENGTH TOLERANCE
>0 - ≤ 10 ± .250 >0 - ≤ 250 ± 6.30>10 - ≤ 15 ± .280 >250 - ≤ 400 ± 7.10>15 - ≤ 25 ± .315 >400 - ≤ 630 ± 8.00>25 - ≤ 40 ± .355 >630 - ≤ 1000 ± 9.00>40 - ≤ 63 ± .400 >1000 - ≤ 1600 ± 10.00>63 - ≤ 100 ± .450 >1600 - ≤ 2500 ± 11.20
Design of Extruded Endless Splices
Testing Procedure
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 80
81
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
O-Ring Cord Stockand Extrusions
Style 0281 Aflas® O-Ring Cord75 Durometer
Style 0282 EPDM (EPR) O-Ring Cord70 Durometer
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
1/16" .070 ± .005 0282070
3/32".093 ± .005 0282093.103 ± .005 0282103
1/8".125 ± .005 0282125.139 ± .007 0282139
3/16".187 ± .007 0282187.210 ± .007 0282210
1/4".250 ± .008 0282250.275 ± .008 0282275
5/16" .312 ± .010 02823123/8" .375 ± .010 02823757/16" .437 ± .010 02824371/2" .500 ± .012 02825005/8" .625 ± .012 02826253/4" .750 ± .016 02827501" 1.000 ± .020 02821
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
1/16" .070 ± .010 0283070
3/32".093 ± .010 0283093.103 ± .013 0283103
1/8".125 ± .013 0283125.139 ± .016 0283139
3/16".187 ± .016 0283187.210 ± .016 0283210
1/4".250 ± .016 0283250.275 ± .020 0283275
5/16" .312 ± .020 02833123/8" .375 ± .020 02833757/16" .437 ± .025 02834371/2" .500 ± .025 02835005/8" .625 ± .025 02836253/4" .750 ± .032 02837501" 1.000 ± .032 02831
Style 0283 Fluoroelastomer O-RingCord 75 Durometer
Style 0283H Fluoroelastomer O-Ring Cord90 Durometer
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
1/16" .070 ± .004 0283H0703/32" .103 ± .006 0283H103
1/8".125 ± .013 0283H125.139 ± .016 0283H139
3/16".187 ± .016 0283H187.210 ± .016 0283H210
1/4".250 ± .016 0283H250.275 ± .020 0283H275
5/16" .312 ± .020 0283H3123/8" .375 ± .020 0283H375
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
3/32" .103 – .006/+.012 02811031/8" .139 – .006/+.014 02811393/16" .210 – .006/+.014 0281210
1/4".250 – .010/+.022 0281250.275 – .010/+.022 0281275
5/16" .312 – .010/+.022 02813123/8" .375 – .010/+.022 0281375
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 81
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Style 0284S Buna-N O-Ring Cord50 Durometer
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
1/8" .139 ± .007 0284S1393/16" .210 ± .007 0284S2101/4" .250 ± .008 0284S2501/4" .275 ± .008 0284S2755/16" .312 ± .010 0284S3123/8" .375 ± .010 0284S3751/2" .500 ± .012 0284S5005/8" .625 ± .012 0284S625
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
1/16".062 ± .005 0284062.070 ± .005 0284070
3/32".093 ± .005 0284093.103 ± .005 0284103
1/8".125 ± .005 0284125.139 ± .007 0284139
3/16".187 ± .007 0284187.210 ± .007 0284210
1/4".250 ± .008 0284250.275 ± .008 0284275
5/16" .312 ± .010 02843123/8" .375 ± .010 02843757/16" .437 ± .010 02844371/2" .500 ± .012 02845009/16" .562 ± .012 02845625/8" .625 ± .012 02846253/4" .750 ± .016 0284750
13/16" .812 ± .018 02848127/8" .875 ± .020 02848751" 1.000 ± .020 02841
1 1/4" 1.250 ± .046 028412501 1/2" 1.500 ± .051 02841500
Style 0284 Buna-N O-Ring Cord70 Durometer
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
3/32" .103 ± .005 0284H103
1/8".125 ± .005 0284H125.139 ± .007 0284H 139
3/16".187 ± .007 0284H187.210 ± .007 0284H210
1/4".250 ± .008 0284H250.275 ± .008 0284H275
5/16" .312 ± .010 0284H3123/8" .375 ± .010 0284H3757/16" .43 7 ± .010 0284H4371/2" .500 ± .012 0284H500
Style 0284H Buna-N O-Ring Cord90 Durometer
Style 0283VB Brown FluoroelastomerO-Ring Cord75 Durometer
3/32" .103 ± .006 0283VB103
1/8".125 ± .013 0283VB125.139 ± .016 0283VB139
3/16".187 ± .016 0283VB187.210 ± .016 0283VB210
1/4".250 ± .016 0283VB250.275 ± .020 0283VB275
5/16" .312 ± .020 0283VB3123/8" .375 ± .020 0283VB3757/16" .437 ± .025 0283VB4371/2" .500 ± .025 0283VB500
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
Style 0285 Neoprene O-Ring Cord70 Durometer
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
1/16" .070 ± .005 0285070
3/32".093 ± .005 0285093.103 ± .005 0285103
1/8".125 ± .005 0285125.139 ± .007 0285139
3/16".187 ± .007 0285187.210 ± .007 0285210
1/4".250 ± .008 0285250.275 ± .008 0285275
5/16" .312 ± .010 02853123/8" .375 ± .010 02853757/16" .437 ± .010 02854371/2" .500 ± .012 02855009/16" .562 ± .012 02855625/8" .625 ± .012 02856253/4" .750 ± .016 02857501" 1.000 ± .020 02851
82
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/24/11 2:38 PM Page 82
83
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
3/32" .098 ± .007 02960981/8" .133 ± .007 02961333/16" .202 ± .010 02962021/4" .264 ± .016 02962645/16" .313 ± .020 02963133/8" .375 ± .020 02963751/2" .500 ± .025 02965005/8" .625 ± .025 02966253/4" .750 ± .025 02967501" 1.000 ± .025 0296100
Style 0296 Buna-N O-Ring Cord70 Durometer (Square)
70 DurometerSilicone Tubing
Style 0286 Silicone O-Ring Cord70 Durometer
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
1/16" .070 ± .007 0286070
3/32".093 ± .007 0286093.103 ± .007 0286103
1/8".125 ± .007 0286125.139 ± .007 0286139
3/16".187 ± .007 0286187.210 ± .007 0286210
1/4".250 ± .008 0286250.275 ± .008 0286275
5/16" .312 ± .008 02863123/8" .375 ± .010 02863757/16" .437 ± .012 02864371/2" .500 ± .015 02865005/8" .625 ± .015 02866253/4" .750 ± .020 02867507/8" .875 ± .039 02868751" 1.000 ± .051 02861
Style 0297 FluoroelastomerSquare/RectangularCord 75 Durometer
1/8".125 ± .007 0297125.134± .007 0297134
3/16" .187 ± .009 02971871/4" .250 ± .010 02972505/16" .313 ± .012 02973133/8" .375 ± .012 0297375
3/8" x 1/2" .375 x .500 ± .018 0297375X5001/2" .500 ± .018 02975005/8" .625 ± .022 02976253/4" .750 ± .025 0297750
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
Style 0286T
SIZE (INCHES) PART NUMBER
1/16" I.D. x 3/16" O.D. 0286T.062 ID x .187 OD1/8" I.D. x 1/4" O.D. 0286T.125 ID x .250 OD
Closed Cell NeopreneSponge Cord
Style 0287
DIAMETER (IN.) PART NUMBER
1/8" 02871253/16" 02871871/4" 02872505/16" 02873123/8" 02873751/2" 02875005/8" 02876253/4" 02877501" 02871
60 Durometer EPRExtrusion
Style 0292
DIAMETER (IN.) PART NUMBER
1/2" x 1/2" 02925005/8" x 5/8" 02926251/2" x 3/4" 029500 x 750
DIAMETER (IN.) PART NUMBER
1/2" x 1/2" 0295W500
70 DurometerFluorelastomer Extrusion
Style 0293
DIAMETER (IN.) PART NUMBER
5/8" x 7/8" 0293625x875
60 DurometerSilicone Extrusion
Style 0294
60 DurometerWhiteNeoprene Extrusion
Style 0295W
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/24/11 2:39 PM Page 83
84
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Style 0Q284 Buna-N Q-Ring Cord70 Durometer
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
1/8" .139 ± .010 0Q2841393/16" .210 ± .010 0Q2842101/4" .275 ± .010 0Q2842751/2" .500 ± .010 0Q284500
Style 0M284B Buna-N O-Ring Cord70 Durometer (Metric)
CROSS SECTION PART
MILLIMETERS INCHES NUMBER
1 .040 ± .005 0M284B11.6 SEE PART NUMBER 02840622 .079 ± .005 0M284B2
2.4 .094 ± .005 0M284B2.42.5 .098 ± .005 0M284B2.53 .118 ± .006 0M284B3
3.5 SEE PART NUMBER 02841394 .157 ± .007 0M284B4
4.5 .177 ± .007 0M284B4.55 .196 ± .007 0M284B5
5.7 .224 ± .007 0M284B5.76 .236 ± .007 0M284B67 SEE PART NUMBER 02840275
7.5 .295 ± .008 0M284B7.58 .315 ± .010 0M284B8
8.4 .331 ± .010 0M284B8.49 .354 ± .010 0M284B910 .394 ± .010 0M284B1011 SEE PART NUMBER 028443712 .472 ± .010 0M284B1213 .512 ± .012 0M284B1314 .551 ± .015 0M284B14
Style 0M283V Fluoroelastomer O-Ring Cord75 Durometer (Metric)
CROSS SECTION PART
MILLIMETERS INCHES NUMBER
1.6 .062 ± .004 0M283V1.62 .079 ± .004 0M283V2
2.4 .094 ± .005 0M283V2.42.5 .098 ± .005 0M283V2.53 .119 ± .005 0M283V3
3.5 SEE PART NUMBER 02831394 .157 ± .007 0M283V4
4.5 .177 ± .008 0M283V4.55 .196 ± .008 0M283V5
5.7 .224 ± .010 0M283V5.76 .236 ± .010 0M283V6
7.5 .295 ± .010 0M283V7.58 .315 ± .012 0M283V89 .354 ± .013 0M283V910 .393 ± .014 0M283V1012 .472 ± .018 0M283V1214 .551 ± .020 0M283V14
Style 0Q283 FluoroelastomerQ-Ring Cord 75Durometer
1/16" .070 ± .007 0Q2830703/32" .103 ± .007 0Q2831031/8" .139 ± .010 0Q2831393/16" .210 ± .012 0Q2832101/4" .275 ± .012 0Q2832753/8" .375 ± .014 0Q2833751/2" .500 ± .018 0Q283500
CROSS SECTION PART
NOMINAL (IN.) ACTUAL (IN.) NUMBER
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/25/11 7:28 AM Page 84
85
Unique device for measuring o-rings up to 8” inside diameter. The base of the cone is usedto determine the cross section of the o-ring. Then, for o-rings 1/4” to 3” inside diameter, thering is simply dropped over the cone, and the size is read above the o-ring. For o-rings from 3” to8” inside diameter, the tape is simply expanded inside the o-ring, and the size is read directly fromthe tape. All size numbers correspond to industryARP standard size series.
Related O-Ring Items
Style ORC O-RingMeasuring Cone and Tape
Laminated flip-chart pictures actual o-ring sizes up to 8” inside diameter. The o-ring is simplyplaced on the chart and lined up with the correct inside diameter and cross section. Thetandard size is then read directly from the chart.
Style ORCH O-Ring Sizing Chart
Similar to Style ORC, but will measure o-rings up to 5 5/8” inside diameter on the cone.No tape is included.
Style ORCB Large O-RingMeasuring Cone
Measures metric 0-rings on one side and standard o-rings on the other. Measures metric o-ringsfrom 70mm to 254 mm inside diameter and standard o-rings from 3 1/8” to 10” inside diameter.
Style ORMMT Measuring Tape for Metric O-Rings
Slide gauge for measuring standard O-Rings up to 13” inside diameter.
Style ORSG O-Ring Slide Gauge
Used to verify the material composition of 60-80 durometer O-RIngs that areknown to be either Viton®, Kalrez®, Nitrile, or EPDM. Stainless steel tubularconstruction.
Style ORID O-Ring Identifier
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Same as Style ORMMT, but measures metric o-rings from 65mm to 484mm inside diameter and standard o-rings from 2-1/2" to 19"inside diameter.
Style ORMMTL Measuring Tape for Metric O-Rings (Large)
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 85
86
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Set of two brass picks with two working ends on each pick. Plastic storage pouch is included.Used to extract o-rings that have been installed. Particularly useful when o-rings have been inservice or when close tolerances are involved.
Style ORP O-Ring Picks
Style ORL O-Ring Lubricant
Barium base petroleum grease formulated to facilitate installation and extend service life of synthetic rubber seals. Afilm applied to the seal itself as well as surfaces over which the seal will travel is suggested for best results. Combinesexcellent surface adherence characteristics and lubricity with inherent water resistance. It is especiallyrecommended for low pressure pneumatic systems as well as reciprocating and low speed oscillating or rotaryapplications. Well suited for most sealing service within a -20° to +300°F temperature range. However, it isnot recommended for use in systems having micronic filters or in contact with seals unsuited for petroleumoil service such as silicone, butyl, or ethylene propylene rubber. If the conditions exist, use of StyleORLS (see below) should be considered. (4 ounce tube)
Style ORLS O-Ring Lubricant (Super)
Silicone lubricant intended to complement Style ORL (above) in that it can be used with virtually any rubber polymer. Itcan also be used over a wider temperature range and in most cases will provide better environmental protection tothe elastomer. It is recommended that this lubricant be used sparingly as only a thin film is necessary for bestresults. It is useful with a wide variety of fluid media since it is quite inert. High pressure systems as well asvacuum uses are typical applications where this lubricant is beneficial. It is useful from -65° to +400°F. It isnon-toxic and non irritating under normal conditions. It will not clog 30 micron filters and is unusuallymoisture resistant and adheres with unusual tenacity. (2 ounce tube)
NOTES:Assembly lubricants should always be used sparingly during application. A light film is all that is required. This is doubly important in cases 1 and 2below.1. When a thin film of Style ORL is used for assembly purposes only, the assembly may be subjected to higher temperatures, with limits determined bythe fluid and elastomer being used.
2. Use only a thin film of Style ORLS on silicone rubber if the temperature will exceed 300°F.
STYLEORL STYLEORLS
Type Barium grease High viscosity silicone fluid
Temperature Range °F -20 to + 180 (1) -65 to +400(2)°(C) (-29 to +82) (-54 to +204)
Seal Use Hydrocarbon fluids General purposePneumatic systems High pressure pneumaticunder 200 psi
Suitable For Fluorocarbon FluorocarbonUseWith Rubber Fluorosilicone FluorosiliconeCompounds: Neoprene Neoprene
Nitrile NitrilePolyphosphazine PolyphosphazinePolyacrylate PolyacrylatePolysulfide PolysulfidePolyurethane Polyurethane
ButadieneButylEthylene PropyleneIsopreneSBR (GRS)Silicone(2)
Will Pass Through No YesMicronic Filters?
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 86
87
Compound Selection for Fluids and Chemicals
Acetaldehyde D C A D B C D A D DAcetamide A B A B B D A A B DAceticAcid, Glacial C D A C B B D B C DAceticAcid, 30% B A A B A B B B D DAceticAnhydride C B B D C B D B D DAcetone D C A D C C D A D DAcetophenone D D A D D D D A D DAcetyl Chloride D D D A C D A D D DAcetylene A B A A B B E A A DAcrylonitrile D D D C D D E D B DAdipicAcid A A A E E A A A D EAlkazene (Dibromoethyl-benzene) D D D B D D B D B DAlum-NH3-Cr-K (aq) A A A D A A D A A EAluminumAcetate (aq) B B A D D B D A A DAluminumChloride (aq) A A A A B A A A A CAluminum Fluoride (aq) A A A A B A A A A CAluminumNitrate (aq) A A A A B A E A A CAluminum Phosphate (aq) A A A A A A E A D EAluminum Sulfate (aq) A A A A A A A A A DAmmonia,Anhydrous B A A D C D D A A DAmmonia Gas (cold) A A A D A A D A A EAmmonia Gas (hot) D B B D A D D B A EAmmonium Carbonate (aq) D A B E E A E A A DAmmonium Chloride (aq) A A A A E A E A A AAmmonium Hydroxide(conc.) D A A B A D B A A DAmmonium Nitrate (aq) A A A E E B E A A EAmmonium Nitrite (aq) A A A E B A E A A EAmmonium Persulfate (aq) D A A E E D E A A DAmmonium Phosphate (aq) A A A E A A E A A EAmmonium Sulfate (aq) A A A D E A E A A EAmylAcetate(Banana Oil) D D A D D D D C D DAmylAlcohol B B A B D B A A A DAmyl Borate A A D A E D E D A EAmyl Chloronaphthalene D D D A D D B D B EAmyl Naphthalene D D D A D D A D B DAniline D D A C D D C A A DAniline Dyes D B A B C B B B A DAniline Hydrochloride B D B B D D B B A DAnimal Fats A B B A B D A B A BAnsul Ether(Anesthetics) C D C D D D C C D BAqua Regia D D C B D D C D B EAroclor, 1248 C D C A B D B C A DAroclor, 1254 D D C A C D B D A DAroclor, 1260 A A A A B A A A A DArsenicAcid A A A A A A A A A CArsenic Trichloride (aq) A A C E E D E C D EAskarel B D D A D D B D A DAsphalt B B D A D D B D A BASTM FuelA A B D A D D A D B AASTM Fuel B A C D A D D A D D BASTM Fuel C A C D A D D A D D DASTM Fuel D A C D A D D A D D EASTMOil One A A D A C D A D A AASTMOil Two A B D A C D A D A B
URETHANE
AFLAS
®
BUTYL
FLUORO-
SILICONE
STYRENE
BUTA
DIENE
(SBR)
SILICONE
FLUORO-
ELASTO
MER
ETHYLENE
PROPYLENE
(EPR)
NITRILE
CHLORO-
PRENE
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOMESTATICAPPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATIONNotes: (1) Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do notcertify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
(2) The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely bythe end user.APG assumes no responsibility whatsoever.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 87
88
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Compound Selection for Fluids and Chemicals (Continued)
ASTMOil Three A B D A C D A D A BBarium Chloride (aq) A A A A A A A A A ABarium Hydroxide (aq) A A A A A A A A A DBarium Sulfate (aq) A A A A A A A A A EBarium Sulfide (aq) A A A A A B A A A ABeer A A A A A A A A A BBeet Sugar Liquors A B A A A A A A A DBenzaldehyde D D A D B D C A B DBenzene D D D A D D C D C DBenzene SulfonicAcid D B C A D D B D D DBenzine (Ligroin) (Nitrobenzine) A B D A D D A D B BBenzoicAcid C D C A C D B D A DBenzoyl Chloride D D D A E D B D A EBenzylAlcohol D B A A B D B A A DBenzyl Benzoate D D B A E D A B A DBenzyl Chloride D D D A D D B D A DBiphenyl (Phenylbenzene) D D D A D D B D D DBleach Solutions D D A A B D B A A DBorax B A A A B B B A A ABordeaux Mixture B B A A B B B A A DBoricAcid A A A A A A A A A ABrine A A A A A A A A D BBromine,Anhydrous D D D A D D B D E DBromine Trifluoride D D D D D D D D E DBromineWater D D B A D D B C A DBromobenzene D D D A D D A D D DBunker Oil A D D A B D A D A BButadiene D D C A D D B D E DButane A A D A D D A D B AButter (Animal Fat) A B A A B D A B A AButyl Acetate D D C D D D D C D DButyl Acetyl Ricinoleate C B A A E D B A A DButyl Acrylate D D D D E D D D D EButyl Alcohol A A B A B A B B A DButyl Amine C D B D D D D C B DButyl Benzoate D D B A E B A B A EButyl Carbitol D C A A D D D A B EButyl Cellosolve D C A D E D D A E DButyl Oleate D D B A E D B B A EButyl Stearate B D C A E D B C A EButylene B C D A D D B D A DButyraldehyde D C B D D D D B D DCalciumAcetate (aq) B B A D D D D A A DCalcium Bisulfite (aq) B A A A A D A D A CCalcium Chloride (aq) A A A A A A A A A ACalcium Hydroxide (aq) A A A A A A A A A BCalcium Hypochlorite(aq) B C A A B C B A A DCalcium Nitrate (aq) A A A A B A A A A ACalcium Sulfide (aq) A A A A B B A A A ACane Sugar Liquors A A A A A A A A A DCarbamate C B B A E D A B A DCarbitol B B B B B B B B A DCarbolicAcid (Phenol) D C B A D E A B A CCarbon Bisulfide C D D A D D A D A E
URETHANE
AFLAS
®
BUTYL
FLUORO-
SILICONE
STYRENE
BUTA
DIENE
(SBR)
SILICONE
FLUORO-
ELASTO
MER
ETHYLENE
PROPYLENE
(EPR)
NITRILE
CHLORO-
PRENE
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOMESTATICAPPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATIONNotes: (1) Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do notcertify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
(2) The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely bythe end user.APG assumes no responsibility whatsoever.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 88
89
Compound Selection for Fluids and Chemicals (Continued)
Carbon Dioxide A B B A B B A B A ACarbonicAcid B A A A A B A A A ACarbon Monoxide A B A A A B B A A ACarbon Tetrachloride C D D A D D C D C DCastor Oil A A B A A A A B A ACellosolve D D B C D D D B A DCellosolveAcetate D D B D D D D B C DCellulube (Fryquel) D D A A E D C A B DChinaWood Oil (Tung Oil) A B C A D D B C A CChlorine (dry) D C D A D D A D E EChlorine (wet) D C C A D D B C E EChlorine Dioxide D D C A E D B C E DChlorine Trifluoride D D D D D D C D E DChloroaceticAcid D D A D E D D B E EChloroacetone D C A D D D D B D DChlorobenzene D D D A D D B D C DChlorobromomethane D D B A D D B B E DChlorobutadiene D D D A D D B D C DChlorododecane D D D A D D A D B DChloroform D D D A D D D D D DO-Chloronaphthalene D D D A D D B D E D1-Chloro 1-Nitro Ethane D D D D D D D D E DChlorosulfonicAcid D D D D D D D D B DChlorotoluene D D D A D D B D D DChlorox (Sodium Hypochlorite NaOCI) B A B A B D B B A DChrome Plating Solutions D D B A B D B B A DChromicAcid D C C A C D C C E ECitricAcid A A A A A A A A A ACoal Tar (Creosote) A B D A D D A D E CCobalt Chloride (aq) A A A A B A A A A ECoconut Oil A B C A A D A C A CCod Liver Oil A B A A B D A A A Aco*ke Oven Gas D D D A B D B D A DCopperAcetate (aq) B B A D D D D A D DCopper Chloride (aq) A B A A A A A A A ACopper Cyanide (aq) A A A A A A A A B ACopper Sulfate (aq) A A A A A B A B A ECorn Oil A C C A A D A C A ACottonseed Oil A B B A A D A C A ACreosote (coal tar) A B D A D D A D A CCresol D C D A D D B D A ECresylicAcid D C D A D D B D A DCumene D D D A D D B D C DCyclohexane A C D A D D B D B ACyclohexanol C A C A D D A D A ECyclohexanone D D B D D D D B C DP-Cymene D D D A D D B D C DDecalin D D D A D D A D B EDecane A D D A B D A D B BDenaturedAlcohol A A A A A A A A A DDetergent Solutions A B A A A B A A A DDeveloping Fluids A A B A A B A A A EDiacetone D D A D D D D A C DDiacetoneAlcohol D B A D B D D A C D
URETHANE
AFLAS
®
BUTYL
FLUORO-
SILICONE
STYRENE
BUTA
DIENE
(SBR)
SILICONE
FLUORO-
ELASTO
MER
ETHYLENE
PROPYLENE
(EPR)
NITRILE
CHLORO-
PRENE
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOMESTATICAPPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATIONNotes: (1) Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do notcertify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
(2) The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely bythe end user.APG assumes no responsibility whatsoever.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:55 PM Page 89
90
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Compound Selection for Fluids and Chemicals (Continued)
Dibenzyl Ether D C B D E D E B D BDibenzyl Sebecate D D B B C D C B A BDibromoethyl benzene (Alkazene) D D D B D D B D D DDibutyl Amine D D C D C D D D A DDibutyl Ether D C C C D D C C D BDibutyl Phthalate D D B C B D C C B CDibutyl Sebecate D D B B B D B B B DO-Dichlorobenzene D D D A D D B D D DDichloro-Isopropyl Ether D D C C D D C D D BDicyclohexylamine C D D D E D D D B DDiesel Oil A C D A D D A D A CDiethylamine B B B D B B D B B CDiethyl Benzene D D D A D D C D E EDiethyl Ether D C D D D D C D D ADiethylene Glycol A A A A B A A A A DDiethyl Sebecate B D B B B D B B B DDiisobutylene B D D A D D C D B DDiisopropyl Benzene D D D A E D B D E EDiisopropyl Ketone D D A D D D D A D DDiisopropylideneAcetone D D C D D D D C E EDimethylAniline (Xylidine) C C B D D C D C E EDimethyl Ether (Methyl Ether) A C D A A D A D E EDimethyl Formamide B C B D B D D B B DDimethyl Phthalate D D B B E D B B B EDinitrotoluene D D D D D D D D D DDioctyl Phthalate C D B B C D B B B DDioctyl Sebecate D D B B C D C B B BDioxane D D B D D D C B D DDioxolane D D B D D D D C D DDipentene A D D A D D C D C DDiphenyl (Phenylbenzene) D D D A D D B D D DDiphenyl Oxides D D D A C D B D B DDowthermOil D D D A C D B D E EDry Cleaning Fluids C D D A D D B D C DEpichlorohydrin D D B D D D D B D DEthane A B D A D D B D A CEthanolamine B B B D B B D B A CEthylAcetate D C B D B D D B D DEthylAcetoacetate D C B D B C D B D DEthylAcrylate D D B D B D D B D DEthylAlcohol A A A C A A A A A DEthyl Benzene D D D A D D A D D DEthyl Benzoate D D A A D A A A C DEthyl Cellosolve D D B D D D D D A DEthyl Cellulose B B B D C B D B A BEthyl Chloride A D C A D D A D B BEthyl Chlorocarbonate D D B A D D B C B DEthyl Chloroformate D D B D D D D C B DEthyl Ether C C C D D D C C D DEthyl Formate D B B A E D A B A DEthyl Mercaptan D C C B C D E D B EEthyl Oxalate D C A A D A B A E EEthyl Pentachlorobenzene D D D A D D B D D DEthyl Silicate A A A A E B A A A E
URETHANE
AFLAS
®
BUTYL
FLUORO-
SILICONE
STYRENE
BUTA
DIENE
(SBR)
SILICONE
FLUORO-
ELASTO
MER
ETHYLENE
PROPYLENE
(EPR)
NITRILE
CHLORO-
PRENE
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOMESTATICAPPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATIONNotes: (1) Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do notcertify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
(2) The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely bythe end user.APG assumes no responsibility whatsoever.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 90
91
Compound Selection for Fluids and Chemicals (Continued)
Ethylene A C B A E C A B E EEthylene Chloride D D C B D D C C A DEthylene Chlorohydrin D B B A C B B B A DEthylene Diamine A A A D A B D A A DEthylene Dichloride D D C A D D C C E DEthylene Glycol A A A A A A A A A BEthylene Oxide D D C D D D D C D DEthylene Trichloride D D C A D D C C E DFattyAcids B B C A C D E C A EFerric Chloride (aq) A A A A B A A A A AFerric Nitrate (aq) A A A A C A A A A AFerric Sulfate (aq) A A A A B A A A A EFish Oil A D D A A D A D E EFluorinated Cyclic Ethers E D A E E D E A E EFluorine (liquid) D D D E D D E D E EFluorobenzene D D D A D D B D E EFluoroboricAcid A A A E E A E A E EFluorocarbon Oils E B A E E B E A E EFluorolube A B A B A C B A B EFluorosilicicAcid A B B A D C D B E EFormaldehyde (RT) C B A D B B D A B DFormicAcid B A A C B A C A E EFreon 11 B C D A D D B D D EFreon 12 A A B B D A C B D AFreon 13 A A A A D A D A D EFreon 21 D D D D D D E D D EFreon 22 D A A D D A D A D DFreon 31 D B A D E B E A D EFreon 32 A A A D E A E A D EFreon 112 B C D A D C E D D EFreon 113 A A C B D B D D D AFreon 114 A A A B D A B A D EFreon 115 A A A B E A E A D EFreon 142b A A B D E B E A D EFreon 152a A A A D E A E A D EFreon 218 A A A A E A E A D EFreon C316 A A A E E A E A D EFreon C318 A A A B E A E A D EFreon 13B1 A A A A D A E A D EFreon 114B2 B B D B D C E D D EFreon 502 B A A B E A E A D EFreon TF A A D B D C E D D AFreon T-WD602 B B B A D C E B D EFreon TMC B C C A C D E C D EFreon T-P35 A A A A A A E A E EFreon TA A B B C C C E B E EFreon TC A A B A D C E B E EFreon MF A C D B D D E D D CFreon BF B C D A D D E D D EFuel Oil A B D A D D A D A BFumaricAcid A B B A B C A B A EFuran, Furfuran D D C E E D E D E EFurfural D C B D D D E B E CFyrquel (Cellulube) D D A A E D C A E D
URETHANE
AFLAS
®
BUTYL
FLUORO-
SILICONE
STYRENE
BUTA
DIENE
(SBR)
SILICONE
FLUORO-
ELASTO
MER
ETHYLENE
PROPYLENE
(EPR)
NITRILE
CHLORO-
PRENE
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOMESTATICAPPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATIONNotes: (1) Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do notcertify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
(2) The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely bythe end user.APG assumes no responsibility whatsoever.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 91
92
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Compound Selection for Fluids and Chemicals (Continued)
GallicAcid B B B A E B A B A DGasoline B C D A D D A D C BGelatin A A A A A A A A A DGlauber’s Salt (aq) D B B A E D A B A EGlucose A A A A A A A A A DGlue A A A A A B A B E EGlycerin A A A A A A A A A DGlycols A A A A A A A A A DGreen Sulfate Liquor B B A A A B B A A DHalowax Oil D D D A D D A D A EN-Hexaldehyde D A A D B D D B D BHexane A B D A D D A D B BN-Hexene-1 B B D A D D A D B BHexylAlcohol A B C A B B B C A DHydrazine B B A D C A D A E DHydraulic Oil(Petroleum) A B D A C D A D A AHydrobromicAcid D D A A D D C A A DHydrobromicAcid 40% D B A A D D C A A DHydrochloricAcid (cold) 37% C B A A C B B A E DHydrochloricAcid (hot) 37% D D C B D D C C E DHydrocyanicAcid B B A A C B B A A EHydrofluoricAcid (conc.) cold D D C A D D D C A EHydrofluoricAcid (conc.) hot D D D C D D D D C EHydrofluoricAcid -Anhydrous D D C D D D D C D EHydrofluosilicicAcid B B B A D C D B A EHydrogen Gas A A A A C A C A A AHydrogen Peroxide (90%) D D B B B D B C A AHydrogen Sulfide (wet) cold D B A D C D C A A EHydrogen Sulfide (wet) hot D C A D C D C A B EHydroquinone C D B B E D B B E EHypochlorousAcid D D B A E D E B E EIodine Pentafluoride D D D D D D D D D DIodoform E D D E E D E D E EIsobutyl Alcohol B A A A A B B A A DIsooctane A B D A D D A D B BIsophorone D D B D D D D C C DIsopropylAcetate D D B D D D D B D DIsopropylAlcohol B B A A A B B A A DIsopropyl Chloride D D D A D D B D E DIsopropyl Ether B C D D D D C D D BKerosene A B D A D D A D A ALacquers D D D D D D D D D DLacquer Solvents D D D D D D D D D DLacticAcid (cold) A A A A A A A A A ELacticAcid (hot) D D D A B D B D A ELard A B B A B D A B A ALavender Oil B D D A D D B D A ELeadAcetate (aq) B B A D D D D A D DLead Nitrite (aq) A A A E B A A A E ELead Sulfamate (aq) B A A A B B A A A ELigroin (Benzine) (Nitrobenzine) A B D A D D A D B BLime Bleach A B A A B B A A A ELime Sulfur D A A A A D A A A ELindol (Hydraulic fluid) D D A B C D C A A D
URETHANE
AFLAS
®
BUTYL
FLUORO-
SILICONE
STYRENE
BUTA
DIENE
(SBR)
SILICONE
FLUORO-
ELASTO
MER
ETHYLENE
PROPYLENE
(EPR)
NITRILE
CHLORO-
PRENE
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOMESTATICAPPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATIONNotes: (1) Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do notcertify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
(2) The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely bythe end user.APG assumes no responsibility whatsoever.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 92
93
Compound Selection for Fluids and Chemicals (Continued)
LinoleicAcid B D D B B D E D A ELinseed Oil A B C A A D A C A BLiquefied PetroleumGas A B D A C D C D C ALubricating Oils(petroleum) A B D A D D A D A BLye B B A B B B A A A DMagnesium Chloride (aq) A A A A A A A A A AMagnesium Hydroxide (aq) B A A A E B E A A DMagnesium Sulfate (aq) A A A A A B A A A EMaleicAcid D C B A E C E B A EMaleicAnhydride D C B D E B E B A EMalicAcid A C B A B C A B A EMercury Chloride (aq) A A A A E A E A A EMercury A A A A E A E A A EMesityl Oxide D D B D D D D B C DMethane A B D B D D B D B CMethylAcetate D B A D D C D A D DMethylAcrylate D B B D D D D B E DMethylacrylicAcid D B B D D D D B E DMethylAlcohol A A A D A A A A A DMethyl Bromide B D D A E D A D A EMethyl Butyl Ketone D D A D C D D A C DMethyl Cellosolve C C B D D D D B E DMethyl Chloride D D C B D D B C E DMethyl Cyclopentane D D D B D D B D B DMethylene Chloride D D C B D D B D E DMethyl Ether A C D A A D A D C EMethyl Ethyl Ketone D C A D D D D B D DMethyl Formate D B B E E D E B E EMethyl Isobutyl Ketone D D B D D D D C D DMethyl Methacrylate D D C D D D D D E EMethyl Oleate D D B B E D B B A EMethyl Salicylate D D B E E C E B E EMilk A A A A A A A A A DMineral Oil A B C A B D A C A AMonochlorobenzene D D D A D D B D D DMonomethylAniline D D B B E D E B E DMonoethanolAmine D D A D B B D B A DMonomethyl Ether A C D A A D A D E EMonovinyl Acetylene A B A A B B E B A EMustard Gas E A A E A B E A E ENaphtha B C D A D D B D B BNaphthalene D D D A D D A D C BNaphthalenicAcid B D D A D D A D B ENatural Gas A A D A A A C D A BNeats Foot Oil A D B A B D A B A ANevilleAcid D D B A D D B B A ENickelAcetate (aq) B B A D D D D A D DNickel Chloride (aq) A A A A A A A A A CNickel Sulfate (aq) A A A A A B A A A CNiter Cake A A A A A A A A A ANitricAcid (conc.) D D D C D D C D B DNitricAcid (dilute) D B B A B D B B E DNitricAcid - Red Fuming D D D D D D D D C ENitrobenzene D D A B D D D A E D
URETHANE
AFLAS
®
BUTYL
FLUORO-
SILICONE
STYRENE
BUTA
DIENE
(SBR)
SILICONE
FLUORO-
ELASTO
MER
ETHYLENE
PROPYLENE
(EPR)
NITRILE
CHLORO-
PRENE
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOMESTATICAPPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATIONNotes: (1) Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do notcertify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
(2) The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely bythe end user.APG assumes no responsibility whatsoever.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 93
94
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Compound Selection for Fluids and Chemicals (Continued)
Nitrobenzene (ligroin) A B D A D D A D E DNitroethane D C B D D B D B E DNitrogen A A A A A A A A A ANitrogen Tetroxide D D C D D D D C E DNitromethane D B B D D B D B E DOctachlorotoluene D D D A D D B D C DOctadecane A B D A D D A D B AN-Octane B B D A D D B D B DOctyl Alcohol B A C A B B B C A DOleicAcid C C D B D D E D A BOleum Spirits B C D A D D B D A COlive Oil A B B A C D A B A AO-Dichlorobenzene D D D A D D B D D DOxalicAcid B B A A B B A A A EOxygen - Cold B A A A A B A A A AOxygen - (200-400°F) D D C B B D D B E DOzone D C A A A D B D A APaint Thinner, Duco D D D B D D B D B DPalmiticAcid A B B A D B A B A APeanut Oil A C C A A D A C A BPerchloricAcid D B B A D D A B A DPerchloroethylene B D D A D D B D E DPetroleum - below 250°F A B D A B D B D A BPetroleum - above 250°F D B D B D D D D B DPhenol (CarbolicAcid) D C B A D E A B E DPhenylbenzene (Biphenyl) D D D A D D B D D DPhenyl Ethyl Ether D D D D D D D D D DPhenyl Hydrazine D D B A E B E B A EPhorone(DiisopropylideneAcetone) D D C D D D D C D DPhosphoricAcid - 20% B B A A B B B B A DPhosphoricAcid - 45% D B A A C C B B A DPhosphorus Trichloride D D A A E D A A A EPickling Solution D D C B D D D C B DPicricAcid B A B A D B B B A EPinene B C D A D D B D A BPine Oil A D D A D D A D A EPiperidine D D A D D D D D E DPlating Solution -Chrome E D A A D D E A E EPlating Solution - Others A D A A D D E A E EPolyvinyl Acetate Emulsion E B A E E D E A E EPotassiumAcetate (aq) B B A D D D D A E DPotassium Chloride (aq) A A A A A A A A A APotassium Cupro Cyanide (aq) A A A A A A A A A APotassium Cyanide (aq) A A A A A A A A A APotassium Dichromate(aq) A A A A A B A A A BPotassium Hydroxide (aq) B B A D C B C A A DPotassium Nitrate (aq) A A A A A A A A A APotassium Sulfate (aq) A A A A A A A A A AProducer Gas A B D A B D B D A APropane A B D A D D B D A Ci-PropylAcetate D D B D D D D B D Dn-PropylAcetate D D B D D D D B D EPropylAcetone (Methyl Butyl Ketone) D D A D C D D A C DPropylAlcohol A A A A A A A A A D
URETHANE
AFLAS
®
BUTYL
FLUORO-
SILICONE
STYRENE
BUTA
DIENE
(SBR)
SILICONE
FLUORO-
ELASTO
MER
ETHYLENE
PROPYLENE
(EPR)
NITRILE
CHLORO-
PRENE
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOMESTATICAPPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATIONNotes: (1) Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do notcertify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
(2) The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely bythe end user.APG assumes no responsibility whatsoever.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 94
95
Compound Selection for Fluids and Chemicals (Continued)
Propyl Nitrate D D B D D D D B E EPropylene D D D A D D B D A DPropylene Oxide D D B D D D D B D DPydraul, 10E, 29 ELT D D A A D D D A A DPydraul, 30E, 50E, 65E, 90E D D A A A D A A A DPydraul, 115E D D A A D D C A A DPydraul, 230E, 312C, 540C D D D A D D D D A DPyranol, Transformer Oil A B D A D D A D A BPyridine D D B D D D D B E EPyroligeneousAcid D B B D E D D B E DPyrrole D D C D B C C D E ERadiation C B B D C C D D A DRapeseed Oil B B A A D D A A A BRed Oil (MIL-H-5606) A B D A D D A D A ARJ-1 (MIL-F-25558 B) A B D A D D A D A ARP-1 (MIL-F-25576 C) A B D A D D A D A ASalAmmoniac A A A A B A A A A ASalicylicAcid B A A A E B A A A ESalt Water A B A A A A A A A BSewage A B B A B B A B A DSilicate Esters B A D A D D A D A ASilicone Greases A A A A C A A A A ASilicone Oils A A A A C A A A A ASilver Nitrate B A A A A A A A A ASkydrol 500 D D A D C D C B B DSkydrol 7000 D D A B C D C A A ESoap Solutions A B A A A A A A A DSodaAsh A A A A A A A A A ESodiumAcetate (aq) B B A D D D D A D CSodium Bicarbonate (aq) (Baking Soda) A A A A A A A A A ESodium Bisulfite (aq) A A A A A B A A A ESodium Borate (aq) A A A A A A A A A ESodium Chloride (aq) A A A A A A A A A ASodium Cyanide (aq) A A A A A A A A A ESodium Hydroxide (aq) B A A B B A B A A BSodium Hypochlorite (aq) (Chlorox) B A B A B D B B A DSodiumMetaphosphate(aq) A B A A E A A A A ESodium Nitrate (aq) B B A E D A E A A ESodium Perborate (aq) B B A A B B A A A ESodium Peroxide (aq) B B A A D B A A A DSodium Phosphate (aq) A B A A D A E A A ASodium Silicate (aq) A A A A E A E A A ESodium Sulfate (aq) A A A A A B A A A ASodiumThiosulfate (aq) B A A A A B A A A ASoybean Oil A B C A A D A C A EStannic Chloride (aq) A B A A B A A A A EStannous Chloride (aq) A A A A B A A A A ESteam, under 300°F D C A D C D D B A DSteam, over 300°F D D C D D D D D A DStearicAcid B B B E B B E B A EStoddard Solvent A B D A D D A D B AStyrene D D D B D D C D E ESucrose Solution A B A A A A A A A DSulfite Liquors B B B A D B B B E E
URETHANE
AFLAS
®
BUTYL
FLUORO-
SILICONE
STYRENE
BUTA
DIENE
(SBR)
SILICONE
FLUORO-
ELASTO
MER
ETHYLENE
PROPYLENE
(EPR)
NITRILE
CHLORO-
PRENE
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOMESTATICAPPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATIONNotes: (1) Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do notcertify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
(2) The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely bythe end user.APG assumes no responsibility whatsoever.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 95
96
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Compound Selection for Fluids and Chemicals (Continued)
Sulfur D A A A C D A A A ESulfur Chloride (aq) C C D A C D A D A ESulfur Dioxide (Dry) D D A A B B B B E ESulfur Dioxide (Wet) D B A A B D B A E ESulfur Dioxide (liquified under pressure) D D A A B D B B E ESulfur Hexafluoride B A A A B D B A C ESulfur Trioxide D D B A B B B B A ESulfuricAcid (dilute) C B B A D C C B A DSulfuricAcid (conc.) D D C B D D D D A DSulfuricAcid (20%Oleum) D D D A D D D D E DSulfurousAcid B B B A D B E B A CTannicAcid A A A A B B E A A ETar, Bituminous B C C A B D A C A ETartaricAcid A B B A A D A B A ATerpineol B D C A E D A C A BTertiary Butyl Alcohol B B B A B B B B A DTertiary Butyl Catechol D B B A E B A B A DTertiary Butyl Mercaptan D D D A D D E D E DTetrabromoethane D D D A D D B D E ETetrabromomethane D D D A D D B D E ETetrabutyl Titanate B B A A E B A B A ETetrachloroethylene D D D A D D B D E DTetraethyl Lead B B D A E D B D E ETetrahydrofuran D D B D D D D C D CTetralin D D D A D D A D E EThionyl Chloride D D C B E D E D E ETitanium Tetrachloride B D D A D D B D E DToluene D D D A D D B D C DToluene Diisocyanate D D B D D D D B D ETransformer Oil A B D A B D A D A ATransmission Fluid TypeA A B D A B D A D A ATriacetin B B A D E B D A E DTriaryl Phosphate D D A A C D B A A DTributoxy EthyLPhosphate D D A A E B B A A DTributyl Mercaptan D D D A D D C D E ETributyl Phosphate D D B D D D D B E DTrichloroaceticAcid B D B C E B D B C DTrichloroethane D D D A D D B D E DTrichloroethylene D D D A D D B D E DTricresyl Phosphate D C A A C A B A A DTriethanolAmine B A A D E B D B A DTriethyl Aluminum D D C B E D E C E ETriethyl Borane D D C A E D E C E ETrinitrotoluene D B D B E D B D E ETrioctyl Phosphate D D A B C D B A A DTung Oil (ChinaWood Oil) A B C A D D B C A CTurbine Oil B D D A D D B D A ATurpentine A D D A D D B D A DUnsymmetrical Dimethyl Hydrazine (UDMH) B B A D D A D A E EVarnish B D D A D D B D E CVegetable Oils A C C A B D A C A EVersilube F-50 A A A A C A A A A AVinegar B B A A A B C A A D
URETHANE
AFLAS
®
BUTYL
FLUORO-
SILICONE
STYRENE
BUTA
DIENE
(SBR)
SILICONE
FLUORO-
ELASTO
MER
ETHYLENE
PROPYLENE
(EPR)
NITRILE
CHLORO-
PRENE
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOMESTATICAPPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATIONNotes: (1) Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do notcertify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
(2) The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely bythe end user.APG assumes no responsibility whatsoever.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 96
97
5 TO 10 YEARS
NitrileSBRUrethane (Polyester)HypalonButylChloropreneEthylene PropyleneEpichlorohydrinUrethane (Polyether)HSN- Not listed in MIL-HDBK-695
(Data to date indicates shelflife of 5 to 10 years)
UPTO 20 YEARS
SiliconeFluorosiliconeFluoroelastomerPolyacrylatePolysulfideAflas® - Not listed in MIL-HDBK-695
(Data to date indicates shelflife of up to 20 years)
Age Resistance of Elastomers
Although when properly stored, elastomers have beenknown to shelf age for very long periods of time, thefollowing chart indicates the generally accepted ageresistance for various elastomers (fromMIL-HDBK-695):
Suggested proper storage conditions
O-Rings should be stored in clean, dry, containers awayfrom ozone, contaminates, sunlight, radiation at atemperature not to exceed 120°F.
Compound Selection for Fluids and Chemicals (Continued)
Vinyl Chloride D D D A E D E D E EWagner 21B Brake Fluid C B A D C A D B A EWater A A A A A A A A A DWhiskey, Wines A A A A A A A A A DWhite Pine Oil B D D A D D A D A EWhite Oil A B D A D D A D A AWood Oil A B D A D D B D A CXylene D D D A D D A D B DXylidine (Di-methylAniline) C C B D D C D C E EZeolites A A A A E A A A A EZincAcetate (aq) B B A D D D D A D DZinc Chloride (aq) A A A A A A A A A EZinc Sulfate (aq) A A A A A B A A A E
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOMESTATICAPPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATIONNotes: (1) Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do notcertify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
(2) The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely bythe end user.APG assumes no responsibility whatsoever.
URETHANE
AFLAS
®
BUTYL
FLUORO-
SILICONE
STYRENE
BUTA
DIENE
(SBR)
SILICONE
FLUORO-
ELASTO
MER
ETHYLENE
PROPYLENE
(EPR)
NITRILE
CHLORO-
PRENE
Age Controls
Because of short shelf life of very early Neoprene and/orNeoprene/Nitrile blends, the Government imposed an AgeControl Program known as ANA Bulletin 438C on MilitaryO-Rings. Its step-by-step schedule allowed themanufacturer (or his agent) four quarters beyond the partcuring date to deliver it to the component builder. They hadtwo more quarters to install the oldest part in theirequipment. These components then had a maximum of 12quarters (3 years) until delivery of the aircraft to theGovernment. This applied only to Nitrile Compounds.Those of other polymers were not covered.
As a result of long-term evaluations of stored O-Rings by anumber of Air Force, Army, and Navy laboratories and along-term study by the O-Ring industries laboratories andinvestigations of long stored and long lost crashed aircrafthydraulic systems, it is concluded that modern NitrileCompounds are safe to use 5 to 10 years (varying on whomakes the conclusion) after the date of the manufacture.Further information may be found in Air Force TechnicalReportAFML-TR-67-235, if desired.
MIL-STD-1523A dated Feb. 1, 1984 replaced MIL-STD-1523 and now allows the manufacturer of the O-Ring or hisagent a full 40 quarters (10 years) to deliver his product tothe procuring activity or contracting officer. MIL-STD-1523A does not control the age beyond this point for O-Rings although it is still very restrictive for hose which isalso covered. Military Material specifications covered byMIL-STD-1523 include: MIL-P-5315, MIL-P-5510, MIL-P-5516, MIL-S-6855CI.I, MIL-R-7362, MIL-P-25732, MIL-P-83461.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 97
98
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Fastener Seals
-6 AFS600-0101-6 * .138 .130 .385 .040 .050
-8 * * .164 .156 .385 .040 .050
-10 AFS600-0101-10 * .190 .180 .443 .050 .072
-10 O.S. AFS600-0101-10OS * .190 .186 .468 .050 .072
-1⁄4 AFS600-0101-1⁄4 AFS600-6230-1⁄4 .250 .240 .505 .050 .072
-1⁄4 O.S. AFS600-0101-1⁄4 O.S. * .250 .245 .531 .050 .072
-5⁄16 AFS600-0101-5⁄16 * .312 .301 .603 .050 .072
-3⁄8 AFS600-0101-3⁄8 AFS600-6230-3⁄8 .375 .364 .666 .050 .072
-7⁄16 AFS600-0101-7⁄16 * .438 .427 .760 .050 .072
-1⁄2 AFS600-0101-1⁄2 * .500 .490 .880 .050 .072
-9⁄16 AFS600-0101-9⁄16 * .562 .552 1.067 .050 .072
-5⁄8 AFS600-0101-5⁄8 * .625 .615 1.193 .050 .072
-3⁄4 AFS600-0101-3⁄4 * .750 .740 1.322 .064 .096
-7⁄8 AFS600-0101-7⁄8 * .875 .864 1.510 .064 .096
-1 AFS600-0101-1 * 1.000 .988 1.760 .064 .096
SIZEDASH
NUMBER
PART NUMBER
NITRILE SILICONE
THREADMAJOR
DIAMETERRUBBER
I.D.METALO.D.
METALTHICKNESS
RUBBERTHICKNESS
* Not currently anAPG stock item. Call for availability.
Fastener seals are one-piece, molded-in-place seals with therubber sealing element mechanically locked to the metalretainer.They are designed to seal beneath the head of thefastener for both internal and external pressure systems.
The principle of controlled confinement is utilized in the design of fastener seals.As the fastener istightened, the rubber seal is compressed, forcing the sealing surfaces securely around the fastenershank - but without squeezing the rubber beyond its elastic limit, or destroying its inherent memory.With fastener seals, there is full metal-to-metal contact at the joining surfaces.
Faster seals provide self-centering for the seal, vacuum sealing, high-pressure sealing, long service,easy installation, moderate torquing, no retorquing, and quick visual inspection.
The 600-Series fastener seals atAPG are 70 durometer nitrile and commercial CAD plated steel, or70 durometer silicone and commercial CAD plated steel. They are available in standard sizes forbolts and screws as listed below.
Fastener Seals and Thread Seals
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 98
99
Like fastener seals, thread seals are one-piece molded-in-place sealswith the rubber sealing element mechanically locked to the metalretainer.They are designed to seal beneath the nut of the fastener and seal directly against the threadsof the fastener.This design allows thread seals to block the spiral passage created by the threads thatmight permit the fluid to wind its way through the helix.When the thread seal is compressed betweenthe nut and the mating surface, the squeeze on the crown causes the inside of the seal to bulge inwardand hug the crest of the thread.This blocks the axial outside leak path.The thread seal also has threewedge-shaped protrusions inside the cylinder hole. Since all standard screw threads have only asingleV-shaped spiral channel, one of these wedges will always be in a position to block the flow offluid through this channel.
Thread seals are self-centering and non-directional.Their low cost can provide considerable savingsbecause they make possible the use of low cost standard fasteners and full threaded fittings. Nospecial tools or skills are needed for assembly.
The 7500-Series thread seals atAPG are 70 durometer nitrile and commercial CAD plated steel, or70 durometer fluoroelastomer and commercial CAD plated steel. They are available in standard sizesfor bolts and screws as listed below.
SIZEDASH
PART NUMBERMETAL METAL
NUMBER NITRILE FLUROELASTOMER O.D. THICKNESS–6 * * .406 .051
–8 * * .406 .051
–10 ATS7500-10 * .469 .051
–1⁄4 ATS7500-1⁄4 * .562 .051
–5⁄16 ATS7500-5⁄16 * .687 .064
–3⁄8 ATS7500-3⁄8 ATS7500-3⁄8VT .750 .064
–7⁄16 * * .906 .078
–1⁄2 ATS7500-1⁄2 * 1.000 .078
–9⁄16 * * 1.094 .094
–5⁄8 ATS7500-5⁄8 ATS7500-5⁄8VT 1.187 .094
–3⁄4 ATS7500-3⁄4 * 1.375 .109
–7⁄8 ATS7500-7⁄8 * 1.562 .109–1 ATS7500-1 * 1.750 .120
Thread Seals
* Not currently anAPG stock item. Call for availability.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 99
100
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Glossary
ABRASIONProgressive wearing away of material.
ABRASIONRESISTANCEThe ability of a rubber Compound to resist mechanical wear.
ACCELERATED LIFE TESTAny set of conditions designed to reproduce in a short time thedeteriorating effect obtained under normal service conditions.
ACCELERATED SERVICE TESTAservice or bench test in which some service condition, such asspeed, or temperature, or continuity of operation, is exaggeratedin order to obtain a result in shorter time.
ACID RESISTANTWithstands the action of acids.
ADHERETo cling or stick together.
ADHESIONSusceptibility of rubber to stick to a contact surface.
AFTERCUREContinuation of vulcanization after the desired cure is effectedand the heat source removed.
AGINGTo undergo changes in physical properties with age or lapse oftime
AGING,AIR OVENA means of accelerating the change in physical properties ofrubber Compounds by exposing them to the action of air at anelevated temperature.
AGING,AIR PRESSUREHEATA means of accelerating the change in physical properties ofrubber Compounds by exposing them to the action of air underpressure at an elevated temperature.
AGING, OXYGENBOMBA means of accelerating the change in physical properties ofrubber Compounds by exposing them to the action of oxygen atan elevated temperature and pressure.
AIR BOMBSimilar to an oxygen bomb but used with air. Used foraccelerated aging test.
AIR CHECKSSurface markings or depressions due to trapping air betweenthe materials being cured and the mold or press surface.
AIR CURINGThe vulcanization of a rubber product in air as distinguished fromvulcanizing in a press or steam vulcanizer.
AMBIENT TEMPERATUREThe environment temperature surrounding the object underconsideration.
ANILINE NO. OFOILTemperature at which a given amount of aniline reacts with aparticular oil. The aniline point generally affects the swell.
ATMOSPHERIC CRACKINGCracks produced in surface of rubber articles by exposure toatmospheric conditions.
AVERAGEMODULUSTotal change of stress divided by total change of strain, i.e., theaverage slope of the stress-strain curve. Employed whenmodulus varies from point to point.
BACKRINDAburn-back into the part at a mold line separation caused by toosoft a rubber stock, excessive acceleration, or too low aplasticity.
BACK-UPRINGWasher-like device installed next to O-Ring to prevent extrusion.
BENCH TESTA modified service test in which the service conditions areapproximated, but the equipment is conventional laboratoryequipment and not necessarily identical with that in which theproduct will be employed.
BENDINGMODULUSForce required to induce bending around a given radius, andhence a measure of stiffness.
BLEEDINGMigration to the surface of plasticizers, waxes, or similarmaterials to form a film or beads.
BLEMISHAmark, deformity, or injury which impairs the appearance.
BLISTERSA raised spot on the surface or a separation between layersusually forming a void or air-filled space in the vulcanized article.
BLOOMA discoloration or change in appearance of the surface of arubber product caused by the migration of a liquid or solid to thesurface. Examples: sulfur bloom, wax bloom. Not to beconfused with dust on the surface from external sources.
BREAKAseparation or discontinuity in any part of an article.
BREAKOUTForce to inaugurate sliding. Expressed in same terms asfriction. An excessive breakout value is taken as an indication ofthe development of adhesion.
DEVELOPEDBYTHEO-RINGDIVISIONOF THERUBBERMANUFACTURINGASSOCIATION, INC.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 100
101
BRITTLENESSTendency to crack when subjected to deformation.
BUNANAgeneral term for the copolymers of butadiene and acrylonitrile.Typical commercial polymers are Hycar and Paracril.
BUNASAgeneral term for the copolymers of butadiene and styrene.
BUTT JOINTJoining two ends of material whereby the junction isperpendicular to the ID of an O-Ring.
BUTYLA synthetic rubber of the polybutene type exhibiting very lowpermeability to gases.
COEFFICIENTOF THERMALEXPANSIONAverage expansion per degree over a stated temperature range,expressed in a fraction of initial dimension. May be linear orvolumetric.
COLD FLEXIBILITYFlexibility following exposure to a predetermined lowtemperature for a predetermined time.
COLD FLOWContinued deformation under stress.
COLDRESISTANTWithstands the effect of cold or low temperatures without loss ofserviceability.
COMMERCIALLYSMOOTHDegree of smoothness of the surface of an article which isacceptable for use.
COMPOUNDA term applied to either vulcanized or unvulcanized mixtures ofelastomers and other ingredients necessary to make a usefulrubber-like material.
COMPRESSIONMODULUSThe ratio of the compressive stress to the resulting compressivestrain (the latter expressed as a fraction of the original height orthickness in the direction of the force). Compression Modulusmay be either static or dynamic.
COMPRESSION SETThe decrease in thickness of a rubber specimen which has beendeformed under specific conditions of load, time andtemperature.
CONDUCTIVEA rubber having qualities of conducting or transmitting heat orelectricity. Most generally applied to rubber products used toconduct static electricity.
CONDUCTIVITYQuality or power of conducting or transmitting heat or electricity.
COPOLYMERA polymer consisting of two different monomers chemicallycombined.
CORROSION (PACKING)Corrosion of rigid member (usually metal) where it contactspacking. The actual corroding agent is fluid medium trapped inthe interface.
CORROSIVE (PACKING)Aproperty of packing whereby it is assumed, often incorrectly, topromote corrosion of the rigid member by the trapped fluid.
CRACKINGA sharp break or fissure in the surface. Generally due toexcessive strain.
CROSS-SECTIONAn O-Ring as viewed if cut at right angles to the axis showinginternal structure.
CURINGDATEO-Ring molding date.
CURING TEMPERATUREThe temperature at which the rubber product is vulcanized.
CYLINDERChamber in which piston, plunger, ram, rod, or shaft is driven byor against the pressure medium.
DUROMETERAn instrument for measuring the hardness of rubber. Measuresthe resistance to the penetration of an indentor point into thesurface of rubber.
DYNAMICO-Ring application in which the O-Ring is subject to movementor moving parts.
DYNAMIC PACKINGA packing employed in a joint whose members are in relativemotion.
DYNAMIC SEALA seal required to prevent leakage past parts which are inrelative motion.
ELASTICITYThe property of an article which tends to return to its originalshape after deformation.
ELASTIC LIMITThe greatest stress which a material is capable of developingwithout a permanent deformation remaining upon completerelease of the stress. In rubber, the elastic limit as above definedis very low and sometimes practically non-existent. Usually thisterm is replaced by various load limits for specific cases in whichthe resulting permanent deformations are not zero but arenegligible.
ELASTOMERAgeneral term for elastic, rubber-like substances.
ELONGATIONIncrease in length expressed numerically as a fraction orpercentage of initial length.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 101
102
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
EXTRUSIONDistortion, under pressure, of portion of seal into clearancebetweenmating metal parts.
FILLERChemically inert, finely divided material added to the polymer toaid in processing and improving properties of abrasionresistance and strength - gives it varying degrees of hardness.
FLASHExcess rubber left around rubber part after molding due to spacebetweenmating mold surfaces; removed by trimming.
FLEX CRACKINGAsurface cracking induced by repeated bending or flexing.
FLEX LIFEThe relative ability of a rubber article to withstand dynamicbending stresses.
FLOCKFibers added to rubber Compounds.
FLOWCRACKSSurface imperfections due to improper flow and failure of stockto knit or blend with itself during the molding operation.
FRICTIONResistance to motion due to the contact of surfaces.
FRICTION, BREAKOUTInitial or starting friction developed when employed as a dynamicseal.
FRICTION, RUNNINGConstant friction developed during operation of a dynamic O-Ring
FUEL,AROMATICFuel which contains benzene or aromatic hydrocarbons.
FUEL, NON-AROMATICFuel which is composed of straight chain hydrocarbons.
GLANDSeal assembly, including O-Ring, groove which holds the O-Ring, and contacting surfaces.
HARDNESSProperty or extent of being hard. Measured by extent of failureof the indentor point or any one of a number of standardhardness testing instruments to penetrate the product.
HARDNESS SHOREADurometer reading in degrees of the hardness of the rubber.(ShoreAhardness of 35 is soft; 90 is hard.)
hom*oGENEOUSGeneral - a material of uniform composition throughout.
HYCAR P.A.Commercial name for polymer or acrylic acid ester.
HYPALONCommercial name for chlorosulphonated derivative ofpolyethylene.
IDENTIFICATIONColored dots or stripes on O-Rings for identification purposes.
IMMEDIATE SETThe deformation found by measurement immediately afterremoval of the load causing the deformation.
IMMERSIONPlacing an article into a fluid, generally so it is completelycovered.
IMPACTThe single instantaneous stroke or contact of a moving bodywith another either moving or at rest, such as a large lump ofmaterial dropping on a conveyor belt.
LIFE TESTA laboratory procedure used to determine the amount andduration of resistance of a rubber article to a specific set ofdestructive forces or conditions.
LINEAR EXPANSIONExpansion in any one linear dimension or the average of alllinear dimensions.
LOGYSluggish, low snap or recovery of a material.
LOWTEMPERATURE FLEXIBILITYThe ability of a rubber product to be flexed, bent or bowed at lowtemperatures.
LOWTEMPERATURE FLEXINGAct or instance of repeated bending or bowing a rubber productunder conditions of low temperature.
MIRROR FINISHAbright, polished surface.
MISALIGNMENTDeparture from alignment.
MISMATCHPoor matching or meeting in splice.
MODULUSTensile stress at a specified elongation.
MODULUSOF ELASTICITYOne of the several measurements of stiffness or resistance todeformation, but often incorrectly used to indicate specificallystatic tension modulus.
MOLDCAVITYHollow space or cavity in the mold which is used to impart thedesired form to the product being molded.
MOLD FINISHThe uninterrupted surface produced by intimate contact ofrubber with the surface of the mold at vulcanization.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 102
103
MOLDMARKSIndentations or ridges embossed into the skin of the moldedproduct by irregularities in the mold cavity surface.
MOLDREGISTERMeans used to align the parts of a mold.
MOONEYSCORCHThe measurement of the rate at which a rubber Compound willprecure or set up by means of the Mooney Viscometer.
MOONEYVISCOSITYThe measurement of the plasticity or viscosity of anuncompounded or compounded unvulcanized rubber andrubber-like materials by means of the Mooney Shearing DiskViscometer.
NICKAsmall notch, slit, or cut.
NOMINAL LENGTHThe desired length from which tolerances are set.
NON-BLOOMINGThe absence of bloom.
OILRESISTANTAbility of a vulcanized rubber to resist the swelling anddeteriorating effects of various type oils.
OIL SWELLThe change in volume of a rubber article due to absorption of oil.
O-RINGAn elastomeric seal of hom*ogeneous composition molded inone piece to the configuration of a torus with circular cross-section (doughnut). The O-Ring is used as a dynamic or staticseal usually installed in a machined groove.
OPTIMUMCUREState of vulcanization at which maximum desired property isattained.
OVERCUREAdegree of cure greater than the optimum.
OXIDATIONThe reaction of oxygen on a rubber product, usually detected bya change in the appearance or feel of the surface or by a changein physical properties.
OXYGENBOMBA chamber capable of holding oxygen at an elevated pressurewhich can be heated to an elevated temperature. Used for anaccelerated aging test.
OZONERESISTANTWithstands the deteriorating effects of ozone (generallycracking).
PACKINGA flexible device used to retain fluids under pressure or seal outforeign matter.
PACKINGGROOVEA groove carved in a flange, or in one member of a concentricjoint, to accommodate a packing.
PERMANENT SETPermanent set is the deformation remaining after a specimenhas been stressed in tension a prescribed amount for a definiteperiod and released for a definite period.
PERMEABILITYProperty of rubber or other materials which permits passage ofgas through the molecular structure of the material.
PIT OR POCKMARKAcircular depression, usually small.
POLYMERA material formed by the joining together of many (poly)individual units (mer) of a monomer.
POROSITYQuality of state of being porous due to presence of globularstructural voids.
REGISTER, OFFORMISMATCHNonconformity of finished article with design dimensions due tomold misalignment during cure.
RELATIVE HUMIDITYThe ratio of the quantity of water vapor actually present in theatmosphere to the greatest amount possible at the giventemperature.
RESILIENCECapable of returning to original size and shape afterdeformation.
RMSRoot mean square - The measure of surface roughness,obtained as the square root of the sum of the squares of micro-inch deviation from true flat.
ROUGH TRIMRemoval of superfluous parts by pulling or picking. Usually asmall portion of the flash or sprue remains attached to theproduct.
RUBBER, NATURALRaw or crude rubber obtained from vegetable sources, basicallythe Unsaturated polymer of isoprene.
RUBBER, NITRILE (BUNAN)Copolymer of butadiene and acrylonitrile; known commerciallyas Butaprene, Chemigum, Hycar OR, Perbunan and Paracril.
RUBBER, SILICONESemi-organic elastomer, containing silicone.
RUBBER, SYNTHETICManufactured elastomers.
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 103
104
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
RUNOUT (SHAFT)Same as Gyration. When expressed in inches alone oraccompanied by abbreviation “TIR” (total indicator reading), itrefers to twice the radial distance between shaft axis and axis ofrotation.
SEALAny device used to prevent the passage of a gas or liquid.
SERVICEOperating conditions to be met.
SHAFTRotating member within cylinder; not in contact with walls.
SHRINKAGEDecreased volume of unit caused by air drying after immersionin fluid.
SIZE,ACTUALActual dimensions of the O-Ring, including tolerance limits.
SIZE, NOMINALApproximate size of O-Ring in fractional dimensions.
SPECIFIC GRAVITYThe ratio of the weight of a given substance to the weight of anequal volume of water at a specified temperature.
SPRUEMARKSMarks left on the surface of a rubber part, usually elevated, afterremoval of the sprue.
SQUEEZECross-section diametral compression of O-Ring betweenbottom surface of the groove and surface of other mating metalpart in the gland assembly.
STATICStationary application such as a gasket.
STATIC SEALSeal designed to work between parts having no relative motion.
STRESSForce per unit of original cross-sectional area required to stretcha specimen to a stated elongation.
SUNCHECKINGSurface cracks, checks, or crazing caused by exposure to director indirect sunlight.
SWELLIncreased volume of unit caused by immersion in fluid.
TEMPERATURERANGELowest temperature at which rubber remains flexible andhighest temperature at which it will function.
TENSILE STRENGTH.Force in pounds per square inch required to cause the rupture ofa specimen of a rubber material.
TERPOLYMERA polymer consisting of three different monomers chemicallycombined.
THIOKOLAsynthetic rubber of the polysulfide type.
THERMALEXPANSIONExpansion caused by increase in temperature. May be linearand volumetric.
TORQUEThe turning power of a shaft.
TRIMThe process involving removal of mold flash.
TRIM CUTDamage to mold skin or finish by too close trimming.
UNDER-CUREDegree of cure less than optimum. May be evidenced bytackiness, loginess or inferior physical properties.
VOIDSThe absence of material or an area devoid of materials wherenot intended.
VISCOSITYA manifestation of internal friction opposed to mobility. Theproperty of fluids and plastic solids by which they resist aninstantaneous change of shape, i.e, resistance to flow.
VOLUMECHANGEChange in volume of a specimen which has been immersed in adesignated fluid under specified condition of time andtemperature. Expressed as a percentage of the original volume.
VOLUME SWELLIncrease in physical size caused by the swelling action of aliquid.
VULCANIZATIONA thermo-setting involving the use of heat and pressure andwhich results in greatly increased strength and elasticity ofrubber-like materials.
WIDTHRadial dimension. For packing rings or sets the term “packingspace” is preferred.
WIPERRINGA ring employed to remove excess fluid, mud, etc., from areciprocating member before it reaches the packing.
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:56 PM Page 104
105
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
Industrial Hose Couplings
Ball ValvesCam and GrooveEVER-TITE®Tough-TITE™U-TITE
ClampsDouble BoltHigh PressureSpiralSteel BandsPreformedOpen-endWormGear
Combination NipplesFoot ValvesGarden HoseGate ValvesGround JointMendersNipplesPin-lugPush-on Hose BarbsStandard Hose BarbsQuick DisconnectsSandblastStrainersUniversal Crowfoot
Pressure Gauges
Dry – Black Steel w/BrassConnections
Liquid FilledStainless Steel Case w/ BrassConnections
All Stainless Steel
O-Rings
Aflas® 80 DurometerChloroprene 70 DurometerE.P.R. 70 DurometerStandard &Metric
E.P.R. Peroxide CuredStandard 80 Durometer
Fluoroelastomer – BlackStandard 75 & 90 DurometerMetric 75 & 90 Durometer
Fluoroelastomer – Brown75 & 90 Durometer
Fluorosilicone 70 DurometerHighly Saturated NitrileGreen 70 DurometerStandard &Metric
Black 90 DurometerBlue TFE Coated 70Durometer
O-Rings (continued)
Nitrile - BlackStandard 50, 70, & 90Durometer
Metric 70 & 90 DurometerNitrile - Black - Peroxide Cured90 Durometer
Nitrile - White 70 DurometerPTFESilicone 70 DurometerStandard &Metric
Square Cut RingsNitrile 70 Durometer
Teflon® EncapsulatedViton® CoreSilicone Core
Urethane 70 & 90 Durometer4 Lobe Q-RingsNitrile 70 DurometerFluoroelastomer 75Durometer
Minnesota Quad-Rings®Available at ENA (anAPG
subsidiary)Nitrile 70 DurometerViton® 70 Durometer
Non-Standard Sizes(Vulcanized)
KitsStandardMetricSplicingSpecialty
O-RingAccessoriesMeasuring Devices(Cones)(Tapes)(Sizing Charts)(Gauges)(Compound Identifiers)
LubricantsPicks
Back-Up Rings
PTFESolidSplitSpiral
Contoured Back-Up RingsNitrile 90 DurometerFluoroelastomer 90Durometer
Leather
O-Ring Cord
Aflas® 75 DurometerE.P.R. 70 DurometerFluoroelastomer - BlackInch 75 & 90 DurometerMetric 75 DurometerSquare 75 Durometer
Fluoroelastomer – Brown75 Durometer
Neoprene 70 DurometerNeoprene Sponge - Closed CellNitrileInch – 50, 70, & 90 DurometerMetric – 70 & 90 DurometerSquare – 70 Durometer
Silicone 70 Durometer4-Lobe Q-RingNitrile 70 DurometerFluoroelastomer 75Durometer
Extrusions
EPDMFluoroelastomerNeoprene - WhiteNeoprene Sponge - Closed CellSilicone - Gray
Hydraulic Seals
Loaded Lip SealsMetal CladWipersMetric Bonded SealsMetric Compact Piston SealsMetric Oil SealsMetric U-CupsMetric V SealsMetric WipersPiston CupsRodWipersT-SealsU-CupsVee PackingsWear RingsWear StripsWVRings
Custom Molded RubberProducts
Mandrel Built & Lathe CutProducts
Rubber Roll CoveringsRubber / Fabric ProductsRubber to Metal Bonding
The APG Product Line
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:57 PM Page 105
106
www.callapg.com 713-675-5271 FAX 713-675-27301-800-888-5223 FAX 1-800-444-3252
The APG Product Line (continued)
Sheet Material
Black Rubber Sponge -Open Cell
Black Rubber - Cloth InsertedButylChipboardCompressed Non-AsbestosCorkCork and Buna-NCork and NeopreneCork and Neoprene SpiralRibbon
Cork and Synthetic Rubber -Adhesive Backed
EPDMFelt – Gray, White, & GreenFibre-CorkFiberglass ClothFiberglassWire InsertedTacky Cloth
Filled PTFEFish PaperFlexible GraphiteFluoroelastomerFluoroelastomer - Nylon InsertedGumRubberHypalonLeatherKoroseal®Neoprene 40, 60, 70, &72 Durometer
Neoprene Cotton andNylon Inserted
Nitrile 50, 60, & 90 DurometerNitrile - White 50-65 DurometerNitrile Sponge - Closed CellNitrile Nylon InsertedNitrile - Transformer GradeNomex® PaperNylonPCTFEPlant (Vegetable) FiberRed RubberSilicone 50 and 70 DurometerSilicone SpongeTank GasketTFE and TFEGlass FilledVinyl MattingVulcanized Fiber –Bone Hard - Red
Fabrication
GasketsWater-jet CutSteel Rule Die Cut
Industrial Glass
Fabrication (continued)
Pipeline Scraper DiscsStripping (with optionaladhesive backing)
Tank Strips & GasketsVulcanizingNon-Standard O-RingsSleevesGaskets
Spiral Wound Gaskets
304 Stainless Steel / Graphite316 Stainless Steel / Graphite
Packing
Aramid FilamentCarbon / GraphiteCarbon / TFEFlax and Flax / TFEGeneral Service PackingG.F.O.®Graphite FilamentInconel Wire-InsertedNovoloid Fiber / PTFEPre-Lubed TFEYarnPre-Lubed TFEYarn (FDA)PTFE Cord PackingStuffing Box Packing (S.B.S.)TFEYarnTwisted Fiberglass Rope &Wick
Industrial Glass
Tubular Gauge GlassStandardHigh PressureRed LineHeavyWallHeavyWall Red Line
Borosilicate Flat GlassCirclesRectanglesSquares
Flat Gauge GlassPlainHigh PressureReflex
Vycor® Brand Flat GlassCirclesRectanglesSquares
Pyrex® BrandAnnular EdgeSight GlassAnnealedTempered
Industrial Glass(continued)
Fused QuartzCirclesRectanglesSquares
GlassAccessoriesGuard Rods – BrassWater Gauges – BrassGauge Glass CuttersGauge Glass GasketsPCTFE ShieldsMica Shields
Plastic Products
Replacement Safety VisorsSafety Visor HeadgearSafety Visor HardhatAdaptersReplacement Lenses forSandblasting Helmets
Plastics for the Printing IndustryCustom Fabricated Die-CutPlastic Products
Specialty &MiscellaneousProducts
Fastener SealsThread SealsToolsGasket CuttersGasket KnivesGauge Glass CuttersPacking HooksO-Ring PicksPunches & Punch SetsClamping System Tools
TapesFiberglassKapton®PolyesterSiliconeAdhesive Backed –Solid
SiliconeAdhesive Backed –Sponge
Teflon® FiberglassTFE Pipe Thread Tape
AdhesivesPTFE Flange SealantStop-It® Pipe Repair System
39848_APG_O_Ring_Txt:39848_APG_O_Ring_Txt 10/21/11 2:57 PM Page 106
www.callapg.com 713-675-5271 FAX 713-675-2730
1-800-888-5223 FAX 1-800-444-3252
Prices
Prices quoted are for acceptance within thirty days from date quoted. Unless specified, prices are based on ourreceiving order for quantities quoted.
Terms
Our terms of payment are 1% 10, net 30 days, unless other arrangements are made through our credit department.
Minimum Invoice
Orders consisting of O-Rings Only - $5.00Orders consisting of O-Rings and/or All Other Products (Excluding Plastic Products) - $15.00City Sales Counter - $35.00Plastic Products - $50.00
Warranty
Products are warranted against defects in workmanship and defects in material. Products having such defects willbe replaced or credited as APG elects. Liability is limited to the invoice value of the defective item. Ourresponsibility shall not exceed the original purchase price of the defective product. In any event, APG shall not beheld responsible for any special or consequential damages. In all cases, please contact us for approval and routingof return items. All claims of shortage or damage must be made within 30 days after receipt of shipment.
Freight
All orders totaling less than $1500 at NET prices are F.O.B. our warehouse with no freight allowance. Orderstotaling $1500 or more at NET prices, any product mix, receive full freight prepaid and allowed, provided such ordersare for one shipment within the lower 48 continental United States and provided our normal freight modes are used.Special delivery charges incurred at the customer’s request are for the customer’s account. Exceptions to thisfreight prepaid and allowed policy: all glass products. These products are F.O.B. our warehouse with no freightallowance unless other items on the order total $1500 or more at NET prices.
Catalog Information
Various information sources were used to compile this catalog. We offer this information only as a guide and cannotassume responsibility for accuracy of the data herein. Prices listed are current, subject to change.
Our Policy
“America’s Most Responsive Warehouse”
www.callapg.com email [emailprotected](713) 675-5271 FAX: (713) 675-27301-800-888-5223 FAX: 1-800-444-3252
P.O. Box 213 (77001) 6039 Armour Dr. (77020)Houston, Texas
(440) 926-1234 P.O. Box 361-800-883-7457 1004 Commerce DriveFax: (440) 926-1112 Grafton, Ohio 44044